Home Android Arch Linux Gentoo Linux LibreELEC Github Geo

ibowin P130




ibowin® P130

  • 10.1 Zoll 1280×800 IPS (MIPI DSI)
  • Allwinner A33 Quad Core
  • 1G RAM
  • 16G ROM
  • WIFI & Bluetooth
  • 1x Allwinner A33 Quad Core
  • 1x Samsung KLMAG8DEDD-A101BGA
  • 2x SK hynix H5TC4G63AFR
  • 1x AXP223
  • 1x Silead GSL3670
  • 1x Realtek 8703

Bilder

Android


Main Screen About Tablet

Apps Storage

Aufbau / Innenleben


PCB: GPT A33_K96_V1.1 2016–07–11 1.91.001.0155



adb shell


cpuinfo

root@astar-y3:/ # cat /proc/cpuinfo  
Processor	: ARMv7 Processor rev 5 (v7l)
processor	: 0
BogoMIPS	: 137309.66

Features	: swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x0
CPU part	: 0xc07
CPU revision	: 5

Hardware	: sun8i
Revision	: 0000
Serial		: 86589d36a74700000000


cpufreq

root@astar-y3:/ # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq
120000
root@astar-y3:/ # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq
1344000
root@astar-y3:/ # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver
cpufreq-sunxi


uname

root@astar-y3:/ # busybox uname -a
Linux localhost 3.4.39 #826 SMP PREEMPT Fri Nov 11 10:41:04 CST 2016 armv7l GNU/Linux


partitions

root@astar-y3:/sdcard # cat /proc/partitions
major minor  #blocks  name

 179        0   16056320 mmcblk0
 179        1   13824000 mmcblk0p1
 179        2      32768 mmcblk0p2
 179        3          1 mmcblk0p3
 179        5      16384 mmcblk0p5
 179        6      16384 mmcblk0p6
 179        7     786432 mmcblk0p7
 179        8    1048576 mmcblk0p8
 179        9      16384 mmcblk0p9
 179       10      32768 mmcblk0p10
 179       11     131072 mmcblk0p11
 179       12      16384 mmcblk0p12
 179       13      16384 mmcblk0p13
 179       14      16384 mmcblk0p14
 179       15      65536 mmcblk0p15


root@astar-y3:/sdcard # ll /dev/block/by-name/                               
lrwxrwxrwx root     root              1970-04-24 22:30 UDISK -> /dev/block/mmcblk0p1
lrwxrwxrwx root     root              1970-04-24 22:30 alog -> /dev/block/mmcblk0p15
lrwxrwxrwx root     root              1970-04-24 22:30 boot -> /dev/block/mmcblk0p6
lrwxrwxrwx root     root              1970-04-24 22:30 bootloader -> /dev/block/mmcblk0p2
lrwxrwxrwx root     root              1970-04-24 22:30 cache -> /dev/block/mmcblk0p11
lrwxrwxrwx root     root              1970-04-24 22:30 data -> /dev/block/mmcblk0p8
lrwxrwxrwx root     root              1970-04-24 22:30 env -> /dev/block/mmcblk0p5
lrwxrwxrwx root     root              1970-04-24 22:30 klog -> /dev/block/mmcblk0p14
lrwxrwxrwx root     root              1970-04-24 22:30 metadata -> /dev/block/mmcblk0p12
lrwxrwxrwx root     root              1970-04-24 22:30 misc -> /dev/block/mmcblk0p9
lrwxrwxrwx root     root              1970-04-24 22:30 private -> /dev/block/mmcblk0p13
lrwxrwxrwx root     root              1970-04-24 22:30 recovery -> /dev/block/mmcblk0p10
lrwxrwxrwx root     root              1970-04-24 22:30 system -> /dev/block/mmcblk0p7


root@astar-y3:/sdcard # busybox fdisk /dev/block/mmcblk0                     

The number of cylinders for this disk is set to 2007040.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
   (e.g., DOS FDISK, OS/2 FDISK)

Command (m for help): p

Disk /dev/block/mmcblk0: 16.4 GB, 16441671680 bytes
1 heads, 16 sectors/track, 2007040 cylinders
Units = cylinders of 16 * 512 = 8192 bytes

              Device Boot      Start         End      Blocks  Id System
/dev/block/mmcblk0p1   *      279041     2013184    13873152   b Win95 FAT32
Partition 1 does not end on cylinder boundary
/dev/block/mmcblk0p2            4609        8704       32768   6 FAT16
Partition 2 does not end on cylinder boundary
/dev/block/mmcblk0p3               1      270337     2162688   5 Extended
Partition 3 does not end on cylinder boundary
/dev/block/mmcblk0p5            8705       10752       16384  83 Linux
/dev/block/mmcblk0p6           10753       12800       16384  83 Linux
/dev/block/mmcblk0p7           12801      111104      786432  83 Linux
/dev/block/mmcblk0p8          111105      242176     1048576  83 Linux
/dev/block/mmcblk0p9          242177      244224       16384  83 Linux
/dev/block/mmcblk0p10         244225      248320       32768  83 Linux
/dev/block/mmcblk0p11         248321      264704      131072  83 Linux
/dev/block/mmcblk0p12         264705      266752       16384  83 Linux
/dev/block/mmcblk0p13         266753      268800       16384  83 Linux
/dev/block/mmcblk0p14         268801      270848       16384  83 Linux
/dev/block/mmcblk0p15         270849      279040       65536  83 Linux

Partition table entries are not in disk order

Command (m for help): q


busybox

root@astar-y3:/ # busybox  
BusyBox v1.18.3 (2012-12-03 15:06:10 CST) multi-call binary.
Copyright (C) 1998-2009 Erik Andersen, Rob Landley, Denys Vlasenko
and others. Licensed under GPLv2.
See source distribution for full notice.

Usage: busybox [function] [arguments]...
   or: busybox --list[-full]
   or: function [arguments]...

	BusyBox is a multi-call binary that combines many common Unix
	utilities into a single executable.  Most people will create a
	link to busybox for each function they wish to use and BusyBox
	will act like whatever it was invoked as.

Currently defined functions:
	[, [[, addgroup, adduser, ar, arping, ash, awk, basename, bunzip2,
	bzcat, cat, catv, chattr, chgrp, chmod, chown, chroot, chrt, chvt,
	cksum, clear, cmp, cp, cpio, crond, crontab, cut, date, dc, dd,
	deallocvt, delgroup, deluser, devmem, df, diff, dirname, dmesg, dnsd,
	dnsdomainname, dos2unix, du, dumpkmap, echo, egrep, eject, env,
	ether-wake, expr, false, fdflush, fdformat, fdisk, fgrep, find, fold,
	free, freeramdisk, fsck, fuser, getopt, getty, grep, gunzip, gzip,
	halt, hdparm, head, hexdump, hostid, hostname, hwclock, id, ifconfig,
	ifdown, ifup, inetd, init, insmod, install, ionice, iostat, ip, ipaddr,
	ipcrm, ipcs, iplink, iproute, iprule, iptunnel, kill, killall,
	killall5, klogd, last, length, less, linux32, linux64, linuxrc, ln,
	loadfont, loadkmap, logger, login, logname, losetup, ls, lsattr, lsmod,
	lspci, lsusb, lzcat, lzma, makedevs, md5sum, mdev, mesg, microcom,
	mkdir, mkdosfs, mke2fs, mkfifo, mkfs.ext2, mkfs.vfat, mknod, mkswap,
	mktemp, modinfo, modprobe, more, mount, mountpoint, mpstat, mt, mv,
	nameif, netstat, nice, nohup, nslookup, od, openvt, passwd, patch,
	pidof, ping, pipe_progress, pivot_root, poweroff, printenv, printf, ps,
	pwd, rdate, readahead, readlink, readmbr, readprofile, realpath,
	reboot, renice, reset, resize, rm, rmdir, rmmod, route, run-parts,
	runlevel, sed, seq, setarch, setconsole, setkeycodes, setlogcons,
	setsid, sh, sha1sum, sha256sum, sha512sum, sleep, sort,
	start-stop-daemon, strings, stty, su, sulogin, swapoff, swapon,
	switch_root, sync, sysctl, syslogd, tail, tar, tee, telnet, test, tftp,
	time, top, touch, tr, traceroute, true, tty, udhcpc, umount, uname,
	uniq, unix2dos, unlzma, unxz, unzip, uptime, usleep, uudecode,
	uuencode, vconfig, vi, vlock, watch, watchdog, wc, wget, which, who,
	whoami, xargs, xz, xzcat, yes, zcat


lsmod

root@astar-y3:/ # lsmod
8723cs 1366244 0 - Live 0x00000000
gslX680new 450588 0 - Live 0x00000000 (F)
stk8baxx 19519 0 - Live 0x00000000
sunxi_schw 12559 0 - Live 0x00000000 (O)
cdc_ether 5099 0 - Live 0x00000000
rtl8150 9023 0 - Live 0x00000000
mcs7830 6292 0 - Live 0x00000000
qf9700 7805 0 - Live 0x00000000
asix 17150 0 - Live 0x00000000
usbnet 17700 4 cdc_ether,mcs7830,qf9700,asix, Live 0x00000000
sunxi_keyboard 3021 0 - Live 0x00000000
sw_device 13804 0 - Live 0x00000000
vfe_v4l2 446320 0 - Live 0x00000000
s5k4ec 29182 0 - Live 0x00000000
sp0a19 9658 0 - Live 0x00000000
sp2519 11603 0 - Live 0x00000000
sp0838 11262 0 - Live 0x00000000
siv121d 12517 0 - Live 0x00000000
bf3920 9068 0 - Live 0x00000000
bf3703 9672 0 - Live 0x00000000
bf3a03 9712 0 - Live 0x00000000
hi704 11359 0 - Live 0x00000000
gc2155 13136 0 - Live 0x00000000
gc2145 14234 0 - Live 0x00000000
gc2035 13496 0 - Live 0x00000000
gc0309 11254 0 - Live 0x00000000
gc0329 10910 0 - Live 0x00000000
gc0312 11737 0 - Live 0x00000000
gc0308 10655 0 - Live 0x00000000
gc0328 10440 0 - Live 0x00000000
vfe_subdev 4579 18 vfe_v4l2,s5k4ec,sp0a19,sp2519,sp0838,siv121d,bf3920,bf3703,bf3a03,hi704,gc2155,gc2145,gc2035,gc0309,gc0329,gc0312,gc0308,gc0328, Live 0x00000000
vfe_os 3951 2 vfe_v4l2,vfe_subdev, Live 0x00000000
cci 21602 19 s5k4ec,sp0a19,sp2519,sp0838,siv121d,bf3920,bf3703,bf3a03,hi704,gc2155,gc2145,gc2035,gc0309,gc0329,gc0312,gc0308,gc0328, Live 0x00000000
cam_detect 38868 0 - Live 0x00000000
videobuf_dma_contig 5567 1 vfe_v4l2, Live 0x00000000
videobuf_core 16520 2 vfe_v4l2,videobuf_dma_contig, Live 0x00000000
leds_sunxi 1359 0 - Live 0x00000000
mali 213154 15 - Live 0x00000000 (O)
lcd 56026 0 - Live 0x00000000
disp 993888 8 mali,lcd, Live 0x00000000
nand 293954 0 - Live 0x00000000 (O)


dmesg

root@astar-y3:/ # dmesg
<4>[    3.654977] [mmc]: +> REG_RINTR=0x80000000
<4>[    3.659516] [mmc]: data[3] detect Card Remove
<4>[    3.664515] [mmc]: mmc not poweroff notifiy
<4>[    3.669155] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[    3.670045] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[    3.670117] [mmc]: mclk 0xf1c20090 0xc001000e
<4>[    3.694939] [mmc]: sdc0 Probe: base:0xf1c0f000 irq:92 sg_cpu:f0020000(75401000) ret 0.
<4>[    3.703735] [mmc]: sdc0 power init.
<4>[    3.707687] [mmc]: sdc0 nop irq: ri 00000000 mi 00000000 ie 00000000 idi 00000000
<4>[    3.716594] [mmc]: mmc not poweroff notifiy
<4>[    3.721256] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[    3.732096] [mmc]: sdc1 Probe: base:0xf1c10000 irq:93 sg_cpu:f0022000(75402000) ret 0.
<4>[    3.740898] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 52,  RTO !!
<4>[    3.749025] [mmc]: sdc1: no card detected, try to shutdown io voltage.
<4>[    3.756281] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 52,  RTO !!
<4>[    3.764427] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[    3.767009] usbcore: registered new interface driver usbhid
<6>[    3.767018] usbhid: USB HID core driver
<6>[    3.767028] zram: num_devices not specified. Using default: 1
<6>[    3.767035] zram: Creating 1 devices ...
<4>[    3.795756] [mmc]: mclk 0xf1c20090 0xc001000e
<6>[    3.795864] ashmem: initialized
<6>[    3.796012] logger: created 256K log 'log_main'
<6>[    3.796165] logger: created 256K log 'log_events'
<6>[    3.796336] logger: created 256K log 'log_radio'
<6>[    3.796466] logger: created 256K log 'log_system'
<6>[    3.796719] Linux telephony interface: v1.00
<4>[    3.797864] headphone_vol=0x3b, earpiece_vol=0x3e, cap_vol=0x5, 		phone_headset_mic_vol=0x3, phone_main_mic_vol=0x1, 		pa_double_used=0x0, pa_vol=0x3a 
<4>[    3.797892] [audiocodec] : aif2 not used!
<4>[    3.797899] [audiocodec] : aif3 not used!
<4>[    3.798111] soc-audio soc-audio.0: ASoC machine audiocodec should use snd_soc_register_card()
<6>[    3.863294] asoc: sndcodec <-> sunxi-codec mapping ok
<6>[    3.870235] input: headset as /devices/virtual/input/input1
<4>[    3.876939] [I2S0]sunxi-i2s0 cannot find any using configuration for controllers, return directly!
<4>[    3.887153] [I2S]sndi2s0 cannot find any using configuration for controllers, return directly!
<4>[    3.896739] [I2S0]sunxi_sndi2s0 cannot find any using configuration for controllers, return directly!
<4>[    3.906986] [I2S1]sunxi-i2s1 cannot find any using configuration for controllers, return directly!
<4>[    3.917122] [I2S]sndi2s1 cannot find any using configuration for controllers, return directly!
<4>[    3.926732] [I2S1]sunxi_sndi2s1 cannot find any using configuration for controllers, return directly!
<4>[    3.927739] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[    3.927819] [mmc]: mclk 0xf1c20090 0xc001000e
<6>[    3.952099] u32 classifier
<6>[    3.955099]     Actions configured
<6>[    3.958872] Netfilter messages via NETLINK v0.30.
<6>[    3.964196] nf_conntrack version 0.5.0 (16043 buckets, 64172 max)
<6>[    3.971474] ctnetlink v0.93: registering with nfnetlink.
<6>[    3.977420] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<4>[    3.985174] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 8,  RTO !!
<6>[    3.993222] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[    3.993229] *******************Try sdio*******************
<4>[    4.005797] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 5,  RTO !!
<6>[    4.014307] xt_time: kernel timezone is -0000
<4>[    4.019146] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 5,  RTO !!
<6>[    4.027361] IPv4 over IPv4 tunneling driver
<4>[    4.032019] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 5,  RTO !!
<6>[    4.040573] gre: GRE over IPv4 demultiplexor driver
<4>[    4.045989] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 5,  RTO !!
<6>[    4.054042] ip_gre: GRE over IPv4 tunneling driver
<6>[    4.054049] *******************Try sd *******************
<4>[    4.065355] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 55,  RTO !!
<6>[    4.074173] ip_tables: (C) 2000-2006 Netfilter Core Team
<4>[    4.080096] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 55,  RTO !!
<6>[    4.088417] arp_tables: (C) 2002 David S. Miller
<4>[    4.093564] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 55,  RTO !!
<6>[    4.101764] TCP: cubic registered
<4>[    4.105443] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 55,  RTO !!
<6>[    4.113582] Initializing XFRM netlink socket
<6>[    4.113588] *******************Try mmc*******************
<4>[    4.113602] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[    4.113677] [mmc]: mclk 0xf1c20090 0xc001000e
<6>[    4.139628] NET: Registered protocol family 10
<6>[    4.145750] Mobile IPv6
<6>[    4.148494] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    4.154698] IPv6 over IPv4 tunneling driver
<6>[    4.160499] NET: Registered protocol family 17
<6>[    4.165457] NET: Registered protocol family 15
<4>[    4.170455] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[    4.170636] Bluetooth: RFCOMM TTY layer initialized
<6>[    4.170658] Bluetooth: RFCOMM socket layer initialized
<6>[    4.170665] Bluetooth: RFCOMM ver 1.11
<6>[    4.170673] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    4.170680] Bluetooth: BNEP filters: protocol multicast
<6>[    4.170689] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    4.170817] L2TP core driver, V2.0
<6>[    4.170842] PPPoL2TP kernel driver, V2.0
<6>[    4.170848] L2TP IP encapsulation support (L2TPv3)
<6>[    4.227476] L2TP netlink interface
<4>[    4.227551] [mmc]: mclk 0xf1c20090 0xc001000e
<6>[    4.236114] L2TP ethernet pseudowire support (L2TPv3)
<6>[    4.242140] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
<6>[    4.250666] ThumbEE CPU extension supported.
<5>[    4.255417] Registering SWP/SWPB emulation handler
<4>[    4.261176] [rfkill]: rfkill set power 1
<4>[    4.265533] gpio rtl8723cs_bt_regon set val 0, act val 0
<4>[    4.282629] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[    4.290790] axp22_dc1sw: incomplete constraints, leaving on
<4>[    4.290944] axp22_dc5ldo: incomplete constraints, leaving on
<4>[    4.291235] axp22_aldo3: incomplete constraints, leaving on
<4>[    4.291290] axp22_aldo2: incomplete constraints, leaving on
<4>[    4.291348] axp22_aldo1: incomplete constraints, leaving on
<4>[    4.291450] axp22_dcdc5: incomplete constraints, leaving on
<4>[    4.291553] axp22_dcdc3: incomplete constraints, leaving on
<4>[    4.291607] axp22_dcdc2: incomplete constraints, leaving on
<3>[    4.291813] otg_wakelock_init: No USB transceiver found
<6>[    4.348006] sunxi-rtc sunxi-rtc: setting system clock to 1970-04-25 03:30:57 UTC (9862257)
<4>[    4.348077] [mmc]: mclk 0xf1c20090 0xc001000e
<3>[    4.362079] ths_fetch_sysconfig_para: type err  device_used = 1. 
<6>[    4.368843] ths_fetch_sysconfig_para: type err ths_trip1_3 = 110. 
<6>[    4.375724] ths_fetch_sysconfig_para: type err ths_trip1_4 = 110. 
<6>[    4.382592] ths_fetch_sysconfig_para: type err ths_trip1_5 = 110. 
<6>[    4.389445] ths_fetch_sysconfig_para: type err ths_trip1_6 = 110. 
<6>[    4.396311] ths_fetch_sysconfig_para: type err ths_trip1_7 = 110. 
<4>[    4.403156] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[    4.403218] [mmc]: mclk 0xf1c20090 0xc001000e
<6>[    4.418125] ths_fetch_sysconfig_para: type err ths_trip1_3_min = 0. 
<6>[    4.425184] ths_fetch_sysconfig_para: type err ths_trip1_3_max = 0. 
<6>[    4.432249] ths_fetch_sysconfig_para: type err ths_trip1_4_min = 0. 
<6>[    4.439295] ths_fetch_sysconfig_para: type err ths_trip1_4_max = 0. 
<6>[    4.446354] ths_fetch_sysconfig_para: type err ths_trip1_5_min = 0. 
<6>[    4.453413] ths_fetch_sysconfig_para: type err ths_trip1_5_max = 0. 
<6>[    4.460470] ths_fetch_sysconfig_para: type err ths_trip1_6_min = 0. 
<4>[    4.460681] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[    4.460745] [mmc]: mclk 0xf1c20090 0xc001000e
<6>[    4.482469] ths_fetch_sysconfig_para: type err ths_trip1_6_max = 0. 
<6>[    4.489514] ths_fetch_sysconfig_para: type err ths_trip2_count = 0. 
<6>[    4.496572] ths_fetch_sysconfig_para: type err ths_trip2_0 = 0. 
<6>[    4.503443] input: sunxi-ths as /devices/virtual/input/input2
<6>[    4.510282] suxi_ths: Kernel Thermal management registered
<3>[    4.516373] fetch C0_LV_count from sysconfig failed
<7>[    4.522212] sunxi_ths_bind : thermal-budget-0
<7>[    4.526851] ths_zone trip = 75, adjust lower = 0, upper = 1
<7>[    4.533271] ths_zone trip = 90, adjust lower = 1, upper = 3
<6>[    4.539461] CPU Budget:Register notifier
<4>[    4.540053] ====codec_init_events===
<6>[    4.547781] CPU Budget:register Success
<6>[    4.552049] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
<6>[    4.566038] ALSA device list:
<6>[    4.569334]   #0: audiocodec
<4>[    4.571268] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[    4.571351] [mmc]: mclk 0xf1c20090 0xc001000e
<4>[    4.587905] sw_uart_set_termios()752 - uart0 write LCR(pre-dlab) failed, lcr 93 reg 13
<6>[    4.597074] Freeing init memory: 328K
<7>[    4.609580] SELinux: 512 avtab hash slots, 1364 rules.
<7>[    4.616126] SELinux: 512 avtab hash slots, 1364 rules.
<7>[    4.621873] SELinux:  1 users, 2 roles, 291 types, 1 bools, 1 sens, 1024 cats
<7>[    4.629800] SELinux:  84 classes, 1364 rules
<7>[    4.636251] SELinux:  Completing initialization.
<4>[    4.638039] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[    4.638205] [mmc]: mclk 0xf1c20090 0xc100000b
<7>[    4.656535] SELinux:  Setting up existing superblocks.
<7>[    4.662277] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<7>[    4.670228] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>[    4.678409] SELinux: initialized (dev bdev, type bdev), not configured for labeling
<7>[    4.686926] SELinux: initialized (dev proc, type proc), uses genfs_contexts
<4>[    4.690094] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
<4>[    4.690164] [mmc]: mclk 0xf1c20090 0xc100000b
<7>[    4.709842] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    4.717893] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
<7>[    4.727056] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>[    4.739774] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<4>[    4.745279] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
<4>[    4.745372] [mmc]: mclk 0xf1c20090 0xc1000005
<7>[    4.762620] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>[    4.770278] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
<7>[    4.780340] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>[    4.788577] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>[    4.797371] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<4>[    4.800495] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
<4>[    4.800564] [mmc]: mclk 0xf1c20090 0xc1000005
<7>[    4.820577] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<6>[    4.855720] mmc0: new high speed MMC card at address 0001
<6>[    4.862442] mmcblk0: mmc0:0001 MAG8DD 15.3 GiB 
<6>[    4.869352]  mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 >
<4>[    4.876955] mmcblk0: p1 size 27746304 extends beyond EOD, truncated
<3>[    4.883939] get nand_size 1 ok
<3>[    4.887321] get nand_size 2 ok
<4>[    4.890716] ===add_partition==[mmcblk0:p8]== size = 27648000
<4>[    4.896992] add_partition==[mmcblk0:p1]==start = 4464640,size = 27648000
<4>[    4.904699] add_partition==[mmcblk0:p2]==start = 73728,size = 65536
<4>[    4.911927] add_partition==[mmcblk0:p3]==start = 1,size = 2
<4>[    4.918297] add_partition==[mmcblk0:p5]==start = 139264,size = 32768
<4>[    4.925553] add_partition==[mmcblk0:p6]==start = 172032,size = 32768
<4>[    4.932809] add_partition==[mmcblk0:p7]==start = 204800,size = 1572864
<4>[    4.940261] add_partition==[mmcblk0:p8]==start = 1777664,size = 2097152
<4>[    4.947771] add_partition==[mmcblk0:p9]==start = 3874816,size = 32768
<4>[    4.955098] add_partition==[mmcblk0:p10]==start = 3907584,size = 65536
<4>[    4.962548] add_partition==[mmcblk0:p11]==start = 3973120,size = 262144
<4>[    4.970072] add_partition==[mmcblk0:p12]==start = 4235264,size = 32768
<4>[    4.977487] add_partition==[mmcblk0:p13]==start = 4268032,size = 32768
<4>[    4.984912] add_partition==[mmcblk0:p14]==start = 4300800,size = 32768
<4>[    4.992340] add_partition==[mmcblk0:p15]==start = 4333568,size = 131072
<6>[    5.000333] *******************mmc init ok *******************
<5>[    5.018548] type=1403 audit(9862258.210:2): policy loaded auid=4294967295 ses=4294967295
<4>[    5.027859] SELinux: Loaded policy from /sepolicy
<5>[    5.036160] type=1404 audit(9862258.240:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
<3>[    6.598328] meminfo2=0
<3>[    6.603693] init: /init.sun8i.rc: 197: ignored duplicate definition of service 'setserialno'
<3>[    6.613348] init: could not import file 'init.sunxi.3gdongle.rc' from '/init.sun8i.rc'
<3>[    6.622390] meminfo2=0
<4>[    6.625134] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<3>[    6.747584] init: /dev/hw_random not found
<6>[    6.752268] init: command 'loglevel' r=0
<4>[    6.773384] [NAND][NAND]nand init start, nand0_used_flag is 0
<4>[    6.779768] [NAND]nand_cache_level err! 0[NAND]nand_capacity_level err! 0
<4>[    6.787357] regisger ISP =====================
<4>[    6.792374] [NAND]nand driver is disabled 
<6>[    6.797526] init: command 'insmod' r=0
<6>[    6.801904] init: command 'symlink' r=0
<6>[    6.806205] init: command 'symlink' r=0
<6>[    6.810532] init: command 'symlink' r=0
<6>[    6.815023] init: command 'mkdir' r=0
<7>[    6.860242] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<6>[    6.868437] init: command 'mount' r=0
<6>[    6.872882] init: command 'mkdir' r=0
<7>[    6.877135] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<6>[    6.885223] init: command 'mount' r=0
<6>[    6.889513] init: command 'mkdir' r=0
<6>[    6.893705] init: command 'mount' r=-1
<6>[    6.898018] init: command 'write' r=0
<6>[    6.902167] init: command 'chown' r=-2
<6>[    6.906372] init: command 'chmod' r=-2
<6>[    6.910710] init: command 'mkdir' r=0
<6>[    6.914855] init: command 'write' r=0
<6>[    6.918989] init: command 'write' r=0
<6>[    6.923131] init: command 'chown' r=-2
<6>[    6.927339] init: command 'chmod' r=-2
<6>[    6.931725] init: command 'mkdir' r=0
<6>[    6.935959] init: command 'mkdir' r=0
<6>[    6.940236] init: command 'mkdir' r=0
<6>[    6.944401] init: command 'mkdir' r=0
<6>[    6.948631] init: command 'mkdir' r=0
<6>[    6.953088] init: command 'mkdir' r=0
<6>[    6.957269] init: command 'mkdir' r=0
<6>[    6.961468] init: command 'mkdir' r=0
<7>[    6.965681] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<6>[    6.973753] init: command 'mount' r=0
<6>[    6.977951] init: command 'mkdir' r=0
<6>[    6.982169] init: command 'mkdir' r=0
<6>[    6.986403] init: command 'mkdir' r=0
<7>[    6.990605] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<6>[    6.998639] init: command 'mount' r=0
<6>[    7.002834] init: command 'mkdir' r=0
<7>[    7.007015] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<6>[    7.015078] init: command 'mount' r=0
<6>[    7.019307] init: command 'write' r=0
<6>[    7.023456] init: command 'write' r=-2
<6>[    7.027713] init: command 'write' r=0
<6>[    7.031825] init: command 'write' r=-2
<6>[    7.036008] init: command 'write' r=-2
<6>[    7.040207] init: command 'write' r=-2
<6>[    7.044412] init: command 'write' r=0
<6>[    7.048520] init: command 'write' r=0
<6>[    7.052662] init: command 'write' r=0
<6>[    7.056770] init: command 'write' r=0
<6>[    7.060917] init: command 'write' r=0
<6>[    7.065031] init: command 'write' r=0
<6>[    7.069180] init: command 'write' r=0
<6>[    7.073315] init: command 'write' r=0
<6>[    7.077426] init: command 'write' r=0
<6>[    7.082329] init: command 'mkdir' r=0
<7>[    7.140173] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<6>[    7.148322] init: command 'mount' r=0
<6>[    7.152472] init: command 'chown' r=0
<6>[    7.156704] init: command 'chown' r=0
<6>[    7.160851] init: command 'chmod' r=0
<6>[    7.164948] init: command 'write' r=-22
<6>[    7.169234] init: command 'write' r=0
<6>[    7.173346] init: command 'write' r=0
<6>[    7.177765] init: command 'mkdir' r=0
<6>[    7.181900] init: command 'chown' r=0
<6>[    7.185993] init: command 'chmod' r=0
<6>[    7.190102] init: command 'write' r=0
<6>[    7.194194] init: command 'write' r=0
<6>[    7.198282] init: command 'write' r=0
<6>[    7.202692] init: command 'mkdir' r=0
<6>[    7.206792] init: command 'chown' r=0
<6>[    7.210904] init: command 'chmod' r=0
<6>[    7.214999] init: command 'write' r=0
<6>[    7.219091] init: command 'write' r=0
<6>[    7.223214] init: command 'write' r=0
<6>[    7.227502] init: command 'chown' r=0
<6>[    7.231704] init: command 'chown' r=0
<6>[    7.235838] init: command 'chmod' r=0
<6>[    7.240297] init: command 'mkdir' r=0
<6>[    7.244383] init: processing action 0x527e0 (init)
<6>[    7.249702] init: command 'export' r=0
<6>[    7.253887] init: command 'export' r=0
<6>[    7.258048] init: command 'export' r=0
<6>[    7.262229] init: command 'export' r=0
<6>[    7.266390] init: command 'export' r=0
<6>[    7.270566] init: command 'export' r=0
<6>[    7.274727] init: command 'export' r=0
<6>[    7.278887] init: command 'export' r=0
<6>[    7.283062] init: command 'export' r=0
<6>[    7.287225] init: command 'export' r=0
<6>[    7.291403] init: processing action 0x55f20 (init)
<6>[    7.296720] init: command 'export' r=0
<6>[    7.301042] init: command 'mkdir' r=0
<6>[    7.305161] init: command 'symlink' r=0
<6>[    7.309542] init: command 'mkdir' r=0
<6>[    7.313745] init: command 'mkdir' r=0
<6>[    7.317922] init: command 'mount' r=0
<6>[    7.322125] init: command 'mkdir' r=0
<6>[    7.326192] init: processing action 0x56088 (early-fs)
<3>[    7.333087] fs_mgr: block device /dev/block/by-name/system
<3>[    7.339180] fs_mgr: block device /dev/block/by-name/cache
<3>[    7.345265] fs_mgr: block device /dev/block/by-name/alog
<3>[    7.351176] fs_mgr: block device /dev/block/by-name/data
<6>[    7.371075] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
<7>[    7.380126] SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
<6>[    7.417784] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[    7.429648] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
<6>[    7.510092] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/cache
<6>[    7.617765] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
<6>[    7.622993] e2fsck: /dev/block/by-name/cache: clean, 12/8192 files, 1551/32768 blocks
<6>[    7.650628] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1
<7>[    7.661691] SELinux: initialized (dev mmcblk0p11, type ext4), uses xattr
<6>[    7.690414] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[    7.702245] SELinux: initialized (dev mmcblk0p15, type ext4), uses xattr
<6>[    7.780081] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/alog
<6>[    7.803887] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
<6>[    7.809048] e2fsck: /dev/block/by-name/alog: clean, 11/4096 files, 1294/16384 blocks
<6>[    7.835302] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1
<7>[    7.846374] SELinux: initialized (dev mmcblk0p15, type ext4), uses xattr
<6>[    7.880620] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[    7.892354] SELinux: initialized (dev mmcblk0p8, type ext4), uses xattr
<6>[    7.980101] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/data
<6>[    8.008649] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
<6>[    8.013914] e2fsck: /dev/block/by-name/data: clean, 690/65536 files, 29041/262144 blocks
<6>[    8.040641] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1,noauto_da_alloc
<7>[    8.053156] SELinux: initialized (dev mmcblk0p8, type ext4), uses xattr
<6>[    8.061133] init: command 'mount_all' r=0
<6>[    8.065629] init: command 'setprop' r=0
<6>[    8.461809] [DISP]disp_module_init
<6>[    8.466396] [DISP]disp_probe
<4>[    8.470202] [DISP] OSAL_CCMU_SetMclkFreq,line:481:    clk 26 freq is 0, wrn
<6>[    8.480926] [DISP]Fb_Init
<4>[    8.483917] [DISP] parser_disp_init_para,line:130:    fetch script data disp_init.screen2_output_type fail
<4>[    8.494673] [DISP] parser_disp_init_para,line:147:    fetch script data disp_init.screen2_output_mode fail
<4>[    8.505409] [DISP] parser_disp_init_para,line:208:    fetch script data disp_init.fb2_format fail
<4>[    8.515267] [DISP] parser_disp_init_para,line:213:    fetch script data disp_init.fb2_scaler_mode_enable fail
<4>[    8.526285] [DISP] parser_disp_init_para,line:218:    fetch script data disp_init.fb2_width fail
<4>[    8.536059] [DISP] parser_disp_init_para,line:223:    fetch script data disp_init.fb2_height fail
<6>[    8.579527] [DISP]disp_probe finish
<6>[    8.583579] [DISP]capture_module_init
<6>[    8.588142] [DISP]capture_probe
<6>[    8.591719] [DISP]capture finish
<6>[    8.595297] [DISP]disp_module_init finish
<6>[    8.601364] init: command 'insmod' r=0
<6>[    8.718970] [LCD]lcd_module_init
<6>[    8.724087] [LCD]lcd_module_init finish
<4>[    8.728355] axp pconf set pin [GPIO2] data to [1]
<6>[    8.734185] init: command 'insmod' r=0
<6>[    8.739048] [LCD]open, step 0 finish
<6>[    8.997897] Get mali parameter successfully
<6>[    9.002650] Init Mali gpu successfully
<4>[    9.008309] Mali: Mali device driver loaded
<6>[    9.014158] init: command 'insmod' r=0
<3>[    9.023767] sunxi_leds_fetch_sysconfig_para leds is not used in config
<5>[    9.031067] =========script_get_err============
<6>[    9.036127] init: command 'insmod' r=0
<6>[    9.040340] init: processing action 0x59428 (console_init)
<3>[    9.047247] init: width = 800
<3>[    9.050573] init: height = 1280
<3>[    9.054061] init: s.st_size = 4096000
<6>[    9.060132] [LCD]open, step 1 finish
<6>[    9.080118] [LCD]open, step 2 finish
<6>[    9.114037] init: command 'console_init' r=0
<6>[    9.118822] init: processing action 0x561b0 (fs)
<3>[    9.126076] init: dont need format /dev/block/by-name/UDISK
<6>[    9.132104] init: command 'format_userdata' r=1
<6>[    9.140844] init: command 'mkdir' r=0
<3>[    9.146702] init: dont need format /dev/block/by-name/private
<6>[    9.152910] init: command 'format_userdata' r=1
<6>[    9.158319] init: command 'mkdir' r=0
<7>[    9.164637] SELinux: initialized (dev mmcblk0p13, type vfat), uses genfs_contexts
<6>[    9.173046] init: command 'mount' r=0
<6>[    9.190291] [LCD]open, step 3 finish
<6>[    9.191201] init: command 'insmod' r=0
<6>[    9.202382] init: command 'insmod' r=0
<4>[    9.231906] axp22_dldo3: Failed to create debugfs directory
<4>[    9.238109] axp22_ldoio0: Failed to create debugfs directory
<4>[    9.244467] axp22_dldo3: Failed to create debugfs directory
<4>[    9.250686] axp22_eldo2: Failed to create debugfs directory
<4>[    9.430230] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x3c)
<4>[    9.610215] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x3c)
<4>[    9.790214] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x3c)
<4>[    9.950218] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x21)
<4>[   10.110217] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x21)
<4>[   10.470213] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x30)
<4>[   10.540215] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x33)
<4>[   10.610215] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x6e)
<4>[   10.770211] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x21)
<4>[   11.130222] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x31)
<4>[   11.490212] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x21)
<4>[   11.550435] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x2d)
<4>[   11.730215] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x3c)
<4>[   11.910211] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x3c)
<4>[   12.090219] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x3c)
<4>[   12.770212] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x30)
<4>[   12.840227] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x33)
<4>[   12.910212] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x6e)
<4>[   13.430216] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x31)
<4>[   13.850433] sunxi_i2c_do_xfer()950 - [i2c2] incomplete xfer (status: 0x20, dev addr: 0x2d)
<6>[   13.862461] init: command 'insmod' r=0
<6>[   13.890475] init: command 'insmod' r=0
<6>[   13.902768] init: command 'insmod' r=0
<6>[   13.923486] init: command 'insmod' r=0
<6>[   13.947423] init: command 'insmod' r=0
<6>[   13.971544] init: command 'insmod' r=0
<6>[   13.995823] init: command 'insmod' r=0
<6>[   14.020463] init: command 'insmod' r=0
<6>[   14.044762] init: command 'insmod' r=0
<6>[   14.069467] init: command 'insmod' r=0
<6>[   14.094377] init: command 'insmod' r=0
<6>[   14.118811] init: command 'insmod' r=0
<6>[   14.143146] init: command 'insmod' r=0
<6>[   14.147441] init: command 'insmod' r=-1
<6>[   14.171416] init: command 'insmod' r=0
<6>[   14.195122] init: command 'insmod' r=0
<6>[   14.218955] init: command 'insmod' r=0
<6>[   14.243596] init: command 'insmod' r=0
<6>[   14.267965] init: command 'insmod' r=0
<6>[   14.292544] init: command 'insmod' r=0
<6>[   14.313345] init: command 'insmod' r=0
<6>[   14.339871] init: command 'insmod' r=0
<5>[   14.424126] [VFE]Welcome to Video Front End driver
<7>[   14.429829] [VFE_DEBUG]vfe_probe
<5>[   14.433538] [VFE]pdev->id = 0
<5>[   14.436827] [VFE]dev->mipi_sel = 0
<5>[   14.440616] [VFE]dev->vip_sel = 0
<5>[   14.444288] [VFE]dev->isp_sel = 0
<7>[   14.447961] [VFE_DEBUG]fetch sys_config1
<7>[   14.452327] [VFE_DEBUG]dev->ccm_cfg[0] = edcb04fc
<7>[   14.457541] [VFE_DEBUG]dev->ccm_cfg[1] = edcb07c8
<7>[   14.462786] [VFE_DEBUG]vip0 vip_dev_qty=2
<7>[   14.467232] [VFE_DEBUG]vip0 vip_define_sensor_list=0
<7>[   14.472793] [VFE_DEBUG]fetch vip_dev0_power_en from sys_config failed
<7>[   14.479940] [VFE_DEBUG]fetch vip_dev0_flash_driver_type from sys_config failed, default =0
<7>[   14.489122] [VFE_DEBUG]fetch vip_dev0_flash_mode from sys_config failed
<7>[   14.496472] [VFE_DEBUG]fetch vip_dev0_af_pwdn from sys_config failed
<7>[   14.503544] [VFE_DEBUG]fetch vip_dev0_act_used from sys_config failed
<7>[   14.510778] [VFE_DEBUG]fetch vip_dev0_act_name from sys_config failed
<7>[   14.517922] [VFE_DEBUG]fetch vip_dev0_act_slave from sys_config failed
<7>[   14.525242] [VFE_DEBUG]fetch vip_dev1_power_en from sys_config failed
<7>[   14.532402] [VFE_DEBUG]fetch vip_dev1_flash_en from sys_config failed
<7>[   14.539545] [VFE_DEBUG]fetch vip_dev1_flash_mode from sys_config failed
<7>[   14.546895] [VFE_DEBUG]fetch vip_dev1_af_pwdn from sys_config failed
<7>[   14.553955] [VFE_DEBUG]fetch vip_dev1_act_used from sys_config failed
<7>[   14.561109] [VFE_DEBUG]fetch vip_dev1_act_name from sys_config failed
<7>[   14.568252] [VFE_DEBUG]fetch vip_dev1_act_slave from sys_config failed
<7>[   14.575502] [VFE_DEBUG]dev->ccm_cfg[0]->ccm = gc2035
<7>[   14.581016] [VFE_DEBUG]dev->ccm_cfg[0]->twi_id = 2
<7>[   14.586327] [VFE_DEBUG]dev->ccm_cfg[0]->i2c_addr = 78
<7>[   14.591938] [VFE_DEBUG]dev->ccm_cfg[0]->is_isp_used = 0
<7>[   14.597730] [VFE_DEBUG]dev->ccm_cfg[0]->is_bayer_raw = 0
<7>[   14.603630] [VFE_DEBUG]dev->ccm_cfg[0]->vflip = 0
<7>[   14.608843] [VFE_DEBUG]dev->ccm_cfg[0]->hflip = 0
<7>[   14.614070] [VFE_DEBUG]dev->ccm_cfg[0]->iovdd_str = axp22_dldo3
<7>[   14.620670] [VFE_DEBUG]dev->ccm_cfg[0]->avdd_str = axp22_ldoio0
<7>[   14.627234] [VFE_DEBUG]dev->ccm_cfg[0]->dvdd_str = axp22_eldo2
<7>[   14.633712] [VFE_DEBUG]dev->ccm_cfg[0]->afvdd_str = 
<7>[   14.639215] [VFE_DEBUG]dev->ccm_cfg[0]->act_used = 0
<7>[   14.644730] [VFE_DEBUG]dev->ccm_cfg[0]->act_name = 
<7>[   14.650156] [VFE_DEBUG]dev->ccm_cfg[0]->act_slave = 0x0
<7>[   14.655949] [VFE_DEBUG]dev->ccm_cfg[1]->ccm = gc0328
<7>[   14.661465] [VFE_DEBUG]dev->ccm_cfg[1]->twi_id = 2
<7>[   14.666775] [VFE_DEBUG]dev->ccm_cfg[1]->i2c_addr = 42
<7>[   14.672386] [VFE_DEBUG]dev->ccm_cfg[1]->is_isp_used = 0
<7>[   14.678178] [VFE_DEBUG]dev->ccm_cfg[1]->is_bayer_raw = 0
<7>[   14.684076] [VFE_DEBUG]dev->ccm_cfg[1]->vflip = 0
<7>[   14.689290] [VFE_DEBUG]dev->ccm_cfg[1]->hflip = 0
<7>[   14.694515] [VFE_DEBUG]dev->ccm_cfg[1]->iovdd_str = axp22_dldo3
<7>[   14.701088] [VFE_DEBUG]dev->ccm_cfg[1]->avdd_str = axp22_ldoio0
<7>[   14.707652] [VFE_DEBUG]dev->ccm_cfg[1]->dvdd_str = axp22_eldo2
<7>[   14.714130] [VFE_DEBUG]dev->ccm_cfg[1]->afvdd_str = 
<7>[   14.719632] [VFE_DEBUG]dev->ccm_cfg[1]->act_used = 0
<7>[   14.725168] [VFE_DEBUG]dev->ccm_cfg[1]->act_name = 
<7>[   14.730587] [VFE_DEBUG]dev->ccm_cfg[1]->act_slave = 0x0
<4>[   14.742408] [VFE_WARN]vfe vpu clock is null
<7>[   14.747045] [VFE_DEBUG]get io resource
<7>[   14.751211] [VFE_DEBUG]get resource, name = csi
<7>[   14.756240] [VFE_DEBUG]dev->regs.csi_regs = f1cb0000
<7>[   14.761756] [VFE_DEBUG]get resource, name = isp
<7>[   14.766779] [VFE_DEBUG]dev->regs.isp_regs = f1cb8000
<7>[   14.773293] [VFE_DEBUG]isp load paddr = 75403000
<7>[   14.778416] [VFE_DEBUG]isp load dma_addr = 35403000
<7>[   14.783856] [VFE_DEBUG]isp load addr = f0036000
<7>[   14.788879] [VFE_DEBUG]isp saved paddr = 75404000
<7>[   14.794110] [VFE_DEBUG]isp saved dma_addr = 35404000
<7>[   14.799613] [VFE_DEBUG]isp saved addr = f0038000
<7>[   14.804739] [VFE_DEBUG]get irq resource
<7>[   14.809029] [VFE_DEBUG]clock resource
<7>[   14.813120] [VFE_DEBUG]vfe core clk = 297000000
<7>[   14.818149] [VFE_DEBUG]get pin resource
<4>[   14.822787] [VFE_WARN]os_gpio_request failed, gpio_name=, gpio=142, ret=0xfffffff0, -16
<4>[   14.831718] [ISP] isp platform_id = 3!
<4>[   14.835873] [ISP] isp isp_get_driver = bf2aa060!
<5>[   14.841145] [VFE]vfe_init end
<6>[   14.844863] init: command 'insmod' r=0
<6>[   14.849436] init: command 'chown' r=0
<5>[   14.853570] [VFE]probe_work_handle start!
<7>[   14.858020] [VFE_DEBUG]v4l2_device_register
<6>[   14.863227] init: command 'mkdir' r=0
<6>[   14.867637] init: command 'chmod' r=0
<7>[   14.871750] [VFE_DEBUG]v4l2 subdev register
<6>[   14.872047] init: command 'chown' r=0
<6>[   14.872233] init: command 'chmod' r=0
<6>[   14.872313] init: command 'chmod' r=0
<6>[   14.872387] init: command 'chown' r=0
<6>[   14.872456] init: command 'chown' r=0
<4>[   14.872534] [rfkill]: rfkill set power 1
<4>[   14.872551] gpio rtl8723cs_bt_regon set val 0, act val 0
<5>[   14.906870] [VFE]v4l2 subdev register input_num = 0
<6>[   14.910115] init: command 'write' r=0
<6>[   14.910181] init: command 'chown' r=-2
<6>[   14.910312] init: command 'chown' r=-30
<6>[   14.910391] init: command 'chown' r=0
<6>[   14.910453] init: command 'setprop' r=0
<6>[   14.910619] init: command 'chmod' r=0
<6>[   14.910734] init: command 'chmod' r=-2
<6>[   14.910832] init: command 'chown' r=0
<6>[   14.910945] init: command 'chown' r=-2
<6>[   14.911029] Bluetooth: bluesleep_get_uart_port enter.
<6>[   14.911039] Bluetooth: bluesleep_get_uart_port get uart_port from blusleep_uart_dev: uart, port irq: 33
<6>[   14.911046] 
<4>[   14.911050] bluesleep_acquire irq
<6>[   14.911213] init: command 'write' r=0
<7>[   14.924923] [sw_device]:sw_device_init begin!
<4>[   14.925163] keyname:ctp_para  subname:ctp_power_io ,get error!
<7>[   14.925175] [sw_device]:get_power_para: power_ldo = axp22_ldoio1,power_ldo_vol = 3000,power_io = 0,reset_pin = 39
<7>[   14.925232] [sw_device]:sw_device_init begin!
<4>[   14.925267] axp22_ldoio1: Failed to create debugfs directory
<6>[   14.925402] init: command 'insmod' r=0
<6>[   14.934513] input: sunxi-keyboard as /devices/virtual/input/input3
<6>[   14.934970] init: command 'insmod' r=0
<6>[   14.958199] init: command 'insmod' r=0
<6>[   14.978430] usbcore: registered new interface driver asix
<6>[   14.978618] init: command 'insmod' r=0
<6>[   14.995892] usbcore: registered new interface driver qf9700
<6>[   14.996072] init: command 'insmod' r=0
<6>[   15.012977] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
<6>[   15.013152] init: command 'insmod' r=0
<6>[   15.031282] usbcore: registered new interface driver rtl8150
<6>[   15.031462] init: command 'insmod' r=0
<6>[   15.047623] usbcore: registered new interface driver cdc_ether
<6>[   15.047782] init: command 'insmod' r=0
<6>[   15.047939] init: command 'chown' r=0
<6>[   15.047993] init: command 'chmod' r=0
<6>[   15.048039] init: command 'chown' r=0
<6>[   15.048080] init: command 'chmod' r=0
<6>[   15.048126] init: command 'chown' r=0
<6>[   15.048167] init: command 'chmod' r=0
<6>[   15.048339] init: command 'chmod' r=-30
<6>[   15.048376] init: processing action 0x47ae8 (post-fs)
<6>[   15.048645] init: command 'mkdir' r=0
<6>[   15.051056] init: command 'mkdir' r=0
<6>[   15.073122] init: command 'insmod' r=0
<6>[   15.073226] init: command 'mount' r=0
<6>[   15.073313] init: command 'mount' r=0
<6>[   15.073351] init: command 'mount' r=0
<6>[   15.073516] init: command 'chown' r=0
<6>[   15.073573] init: command 'chmod' r=0
<6>[   15.073831] init: command 'restorecon' r=0
<6>[   15.074776] init: command 'chown' r=-2
<6>[   15.074815] init: command 'chmod' r=-2
<6>[   15.074905] init: command 'restorecon' r=-2
<6>[   15.075029] init: command 'chown' r=0
<6>[   15.075097] init: command 'chmod' r=0
<6>[   15.075160] init: command 'chown' r=0
<6>[   15.075220] init: command 'chmod' r=0
<6>[   15.075318] init: command 'chown' r=0
<6>[   15.075378] init: command 'chmod' r=0
<6>[   15.075438] init: command 'chown' r=0
<6>[   15.075495] init: command 'chmod' r=0
<6>[   15.075551] init: command 'chown' r=-2
<6>[   15.075592] init: command 'chmod' r=-2
<6>[   15.075956] init: command 'mkdir' r=0
<6>[   15.075995] init: processing action 0x4e0f0 (post-fs-data)
<6>[   15.076059] init: command 'chown' r=0
<6>[   15.076102] init: command 'chmod' r=0
<6>[   15.076257] init: command 'restorecon' r=0
<6>[   15.078278] init: command 'copy' r=0
<6>[   15.080577] init: command 'mkdir' r=0
<6>[   15.080628] init: command 'copy' r=-1
<6>[   15.082104] init: command 'chown' r=-2
<6>[   15.082140] init: command 'chmod' r=-2
<6>[   15.082171] init: command 'copy' r=-1
<6>[   15.082217] init: command 'chown' r=-2
<6>[   15.082246] init: command 'chmod' r=-2
<6>[   15.082276] init: command 'write' r=-2
<6>[   15.082544] init: command 'mkdir' r=0
<6>[   15.082840] init: command 'mkdir' r=0
<6>[   15.083080] init: command 'mkdir' r=0
<6>[   15.083303] init: command 'mkdir' r=0
<6>[   15.083593] init: command 'mkdir' r=0
<6>[   15.083856] init: command 'mkdir' r=0
<6>[   15.084071] init: command 'mkdir' r=0
<6>[   15.084305] init: command 'mkdir' r=0
<6>[   15.084553] init: command 'mkdir' r=0
<6>[   15.084814] init: command 'mkdir' r=0
<6>[   15.085080] init: command 'mkdir' r=0
<6>[   15.085343] init: command 'mkdir' r=0
<6>[   15.086056] init: command 'chmod' r=0
<6>[   15.086117] init: command 'chown' r=0
<6>[   15.086390] init: command 'mkdir' r=0
<6>[   15.086659] init: command 'mkdir' r=0
<6>[   15.086706] init: command 'chown' r=0
<6>[   15.087555] init: command 'mkdir' r=0
<6>[   15.088353] init: command 'mkdir' r=0
<6>[   15.088613] init: command 'mkdir' r=0
<6>[   15.089484] init: command 'mkdir' r=0
<6>[   15.091472] init: command 'mkdir' r=0
<6>[   15.100817] init: command 'mkdir' r=0
<6>[   15.101164] init: command 'mkdir' r=0
<6>[   15.101433] init: command 'mkdir' r=0
<6>[   15.101692] init: command 'mkdir' r=0
<6>[   15.101945] init: command 'mkdir' r=0
<6>[   15.102179] init: command 'mkdir' r=0
<6>[   15.103284] init: command 'mkdir' r=0
<6>[   15.103582] init: command 'mkdir' r=0
<6>[   15.103847] init: command 'mkdir' r=0
<6>[   15.103892] init: command 'chown' r=0
<6>[   15.103934] init: command 'chmod' r=0
<6>[   15.104184] init: command 'mkdir' r=0
<6>[   15.104461] init: command 'mkdir' r=0
<6>[   15.104708] init: command 'mkdir' r=0
<6>[   15.104762] init: command 'symlink' r=-1
<6>[   15.105025] init: command 'mkdir' r=0
<6>[   15.105232] init: computing context for service '/system/bin/busybox'
<5>[   15.107233] init: starting 'precopy'
<6>[   15.107715] init: command 'start' r=0
<6>[   15.107763] init: command 'setprop' r=0
<6>[   15.107944] init: computing context for service '/system/bin/busybox'
<5>[   15.108122] init: starting 'bootclone'
<6>[   15.108563] init: command 'start' r=0
<6>[   15.108664] init: processing action 0x538f8 (post-fs-data)
<6>[   15.108861] init: command 'chown' r=0
<6>[   15.108971] init: command 'chmod' r=0
<6>[   15.109056] init: command 'chown' r=0
<6>[   15.109154] init: command 'chmod' r=0
<6>[   15.109194] init: processing action 0x56180 (post-fs-data)
<6>[   15.109211] init: processing action 0x59470 (mix_hwrng_into_linux_rng)
<3>[   15.109256] init: /dev/hw_random not found
<6>[   15.109269] init: command 'mix_hwrng_into_linux_rng' r=0
<6>[   15.109282] init: processing action 0x594b8 (property_service_init)
<3>[   15.112215] meminfo2=0
<6>[   15.112276] init: MemTotal: 1027128KB
<6>[   15.196382] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
<6>[   15.196651] init: command 'property_service_init' r=0
<6>[   15.196690] init: processing action 0x59500 (signal_init)
<6>[   15.196831] init: command 'signal_init' r=0
<6>[   15.196860] init: processing action 0x59548 (check_startup)
<6>[   15.196944] init: command 'check_startup' r=0
<6>[   15.196966] init: processing action 0x4ea38 (boot)
<6>[   15.198227] init: command 'ifup' r=0
<6>[   15.198382] init: command 'hostname' r=0
<6>[   15.198452] init: command 'domainname' r=0
<6>[   15.198544] init: command 'chmod' r=0
<6>[   15.198593] init: command 'chown' r=0
<6>[   15.198617] init: command 'setrlimit' r=0
<6>[   15.198692] init: command 'write' r=0
<6>[   15.198759] init: command 'write' r=0
<6>[   15.198829] init: command 'chown' r=0
<6>[   15.198878] init: command 'chmod' r=0
<6>[   15.198927] init: command 'chown' r=0
<6>[   15.198973] init: command 'chmod' r=0
<6>[   15.199034] init: command 'write' r=0
<6>[   15.199100] init: command 'write' r=0
<6>[   15.199148] init: command 'chown' r=-2
<6>[   15.199188] init: command 'chown' r=-2
<6>[   15.199230] init: command 'chown' r=-2
<6>[   15.199272] init: command 'chown' r=-2
<6>[   15.199310] init: command 'chown' r=-2
<6>[   15.199357] init: command 'chown' r=-2
<6>[   15.199402] init: command 'chown' r=0
<6>[   15.199446] init: command 'chown' r=0
<6>[   15.199490] init: command 'chown' r=0
<6>[   15.199537] init: command 'chown' r=0
<6>[   15.199578] init: command 'chmod' r=0
<6>[   15.199620] init: command 'chmod' r=0
<6>[   15.199661] init: command 'chmod' r=0
<6>[   15.199727] init: command 'chown' r=-2
<6>[   15.199808] init: command 'chmod' r=-2
<6>[   15.199912] init: command 'chown' r=-2
<6>[   15.199984] init: command 'chmod' r=-2
<6>[   15.200111] init: command 'chown' r=-2
<6>[   15.200176] init: command 'chmod' r=-2
<6>[   15.200235] init: command 'chown' r=-2
<6>[   15.200291] init: command 'chmod' r=-2
<6>[   15.200352] init: command 'chown' r=-2
<6>[   15.200408] init: command 'chmod' r=-2
<6>[   15.200464] init: command 'chown' r=-2
<6>[   15.200594] init: command 'chmod' r=-2
<6>[   15.200730] init: waitpid returned pid 99, status = 00000000
<5>[   15.200744] init: process 'precopy', pid 99 exited
<6>[   15.200868] init: command 'chown' r=-2
<6>[   15.200927] init: command 'chmod' r=-2
<6>[   15.200982] init: command 'chown' r=-2
<6>[   15.201034] init: command 'chmod' r=-2
<6>[   15.201087] init: command 'chown' r=-2
<6>[   15.201141] init: command 'chown' r=-2
<6>[   15.201194] init: command 'chmod' r=-2
<6>[   15.201247] init: command 'chown' r=-2
<6>[   15.201300] init: command 'chmod' r=-2
<6>[   15.201353] init: command 'chown' r=-2
<6>[   15.201406] init: command 'chmod' r=-2
<6>[   15.201485] init: command 'chown' r=0
<6>[   15.201539] init: command 'chmod' r=0
<6>[   15.201598] init: command 'chown' r=0
<6>[   15.201654] init: command 'chmod' r=0
<6>[   15.201718] init: command 'chown' r=0
<6>[   15.201779] init: command 'chmod' r=0
<6>[   15.201832] init: command 'chown' r=0
<6>[   15.201879] init: command 'chmod' r=0
<6>[   15.201940] init: command 'chown' r=-2
<6>[   15.201997] init: command 'chmod' r=-2
<6>[   15.202056] init: command 'chown' r=-2
<6>[   15.202113] init: command 'chmod' r=-2
<6>[   15.202164] init: command 'chown' r=-2
<6>[   15.202211] init: command 'chown' r=-2
<6>[   15.202268] init: command 'chown' r=-2
<6>[   15.202318] init: command 'chown' r=-2
<6>[   15.202366] init: command 'chmod' r=-2
<6>[   15.202412] init: command 'chown' r=-2
<6>[   15.202461] init: command 'chmod' r=-2
<6>[   15.202575] init: command 'chown' r=0
<6>[   15.202653] init: command 'chmod' r=0
<6>[   15.202709] init: command 'chown' r=-2
<6>[   15.202758] init: command 'chown' r=-2
<6>[   15.202806] init: command 'chown' r=-2
<6>[   15.202853] init: command 'chown' r=-2
<6>[   15.202900] init: command 'chown' r=-2
<6>[   15.202947] init: command 'chown' r=-2
<6>[   15.202993] init: command 'chown' r=-2
<6>[   15.203042] init: command 'chown' r=-2
<6>[   15.203091] init: command 'chown' r=-2
<6>[   15.203139] init: command 'chown' r=-2
<6>[   15.203186] init: command 'chown' r=-2
<6>[   15.203237] init: command 'chown' r=-2
<6>[   15.203282] init: command 'chown' r=-2
<6>[   15.203328] init: command 'chown' r=-2
<6>[   15.203377] init: command 'chown' r=-2
<6>[   15.203425] init: command 'chown' r=-2
<6>[   15.203471] init: command 'chown' r=-2
<6>[   15.203520] init: command 'chown' r=-2
<6>[   15.203568] init: command 'chown' r=-2
<6>[   15.203621] init: command 'chown' r=0
<6>[   15.203669] init: command 'chown' r=0
<6>[   15.203717] init: command 'chown' r=0
<6>[   15.203764] init: command 'chown' r=0
<6>[   15.203809] init: command 'chown' r=0
<6>[   15.203857] init: command 'chown' r=0
<6>[   15.203966] init: command 'chown' r=0
<6>[   15.204065] init: command 'chown' r=0
<6>[   15.204140] init: command 'setprop' r=0
<6>[   15.204194] init: command 'setprop' r=0
<6>[   15.204255] init: command 'setprop' r=0
<6>[   15.204307] init: command 'setprop' r=0
<6>[   15.204359] init: command 'setprop' r=0
<6>[   15.204411] init: command 'setprop' r=0
<6>[   15.204463] init: command 'setprop' r=0
<6>[   15.204516] init: command 'setprop' r=0
<6>[   15.204568] init: command 'setprop' r=0
<6>[   15.204620] init: command 'setprop' r=0
<6>[   15.204677] init: command 'setprop' r=0
<6>[   15.204709] init: command 'setprop' r=0
<6>[   15.204739] init: command 'setprop' r=0
<5>[   15.204913] init: starting 'healthd'
<6>[   15.205629] init: computing context for service '/system/bin/lights_leds.sh'
<5>[   15.205850] init: starting 'lights_leds'
<6>[   15.206574] init: computing context for service '/system/bin/servicemanager'
<5>[   15.206797] init: starting 'servicemanager'
<6>[   15.207651] init: computing context for service '/system/bin/vold'
<5>[   15.207933] init: starting 'vold'
<6>[   15.208460] init: command 'class_start' r=0
<6>[   15.208905] init: computing context for service '/system/bin/netd'
<5>[   15.209146] init: starting 'netd'
<6>[   15.209673] binder: 102:102 transaction failed 29189, size 0-0
<6>[   15.209881] init: computing context for service '/system/bin/debuggerd'
<5>[   15.210198] init: starting 'debuggerd'
<6>[   15.210928] init: computing context for service '/system/bin/surfaceflinger'
<5>[   15.211198] init: starting 'surfaceflinger'
<6>[   15.211959] init: computing context for service '/system/bin/app_process'
<5>[   15.212187] init: starting 'zygote'
<6>[   15.212304] init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'
<6>[   15.212316] init: Created socket '/dev/socket/mdns' with mode '660', user '0', group '1000'
<6>[   15.212768] init: Created socket '/dev/socket/dnsproxyd' with mode '660', user '0', group '3003'
<6>[   15.212944] init: computing context for service '/system/bin/drmserver'
<6>[   15.213202] init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'
<5>[   15.213222] init: starting 'drm'
<6>[   15.214029] init: computing context for service '/system/bin/mediaserver'
<5>[   15.214270] init: starting 'media'
<6>[   15.215170] init: computing context for service '/system/bin/installd'
<6>[   15.215180] init: Created socket '/dev/socket/zygote' with mode '660', user '0', group '1000'
<5>[   15.215401] init: starting 'installd'
<3>[   15.215934] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<6>[   15.216294] init: computing context for service '/system/bin/keystore'
<5>[   15.216544] init: starting 'keystore'
<6>[   15.217499] init: computing context for service '/system/bin/sh'
<5>[   15.217799] init: starting 'setserialno'
<6>[   15.218631] init: computing context for service '/system/bin/log_service'
<5>[   15.218896] init: starting 'logger_private'
<6>[   15.219696] init: computing context for service '/system/bin/setmacaddr'
<5>[   15.219961] init: starting 'engsetmacaddr'
<6>[   15.221661] init: computing context for service '/system/bin/setbtmacaddr'
<5>[   15.221914] init: starting 'engsetbtmacaddr'
<6>[   15.222377] init: command 'class_start' r=0
<6>[   15.222504] init: processing action 0x58f88 (boot)
<6>[   15.222665] init: command 'chmod' r=0
<6>[   15.222763] init: command 'chown' r=0
<6>[   15.222834] init: command 'chown' r=0
<6>[   15.222901] init: command 'chown' r=0
<6>[   15.222970] init: command 'chown' r=0
<6>[   15.223044] init: command 'chown' r=0
<6>[   15.223117] init: command 'chown' r=0
<6>[   15.223205] init: command 'chown' r=0
<6>[   15.223283] init: command 'chown' r=0
<6>[   15.223362] init: command 'chown' r=0
<6>[   15.223419] init: command 'chown' r=0
<6>[   15.223487] init: command 'chmod' r=0
<6>[   15.223539] init: command 'chmod' r=0
<6>[   15.223595] init: command 'chmod' r=0
<6>[   15.223653] init: command 'chmod' r=0
<6>[   15.223716] init: command 'chmod' r=0
<6>[   15.223776] init: command 'chmod' r=0
<6>[   15.223833] init: command 'chmod' r=0
<6>[   15.223888] init: command 'chmod' r=0
<6>[   15.223918] init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1000'
<6>[   15.223959] init: command 'chmod' r=0
<6>[   15.224006] init: command 'chmod' r=0
<5>[   16.377251] [VFE]dev->ccm_cfg[0]->ccm = gc2035,dev->ccm_cfg[1]->ccm = gc0328.
<7>[   16.380103] [sw_device]:sw_devices_events begin!
<7>[   16.380116] [sw_device]:sw_register_device_detect begin!
<7>[   16.380153] ========sw_sysconfig_get_para===================
<7>[   16.380172] sw_sysconfig_get_para: device_twi_id is 1. 
<4>[   16.408402] axp22_dldo3: Failed to create debugfs directory
<6>[   16.410243] init: command 'chown' r=0
<6>[   16.411677] init: waitpid returned pid 103, status = 00000000
<5>[   16.411700] init: process 'lights_leds', pid 103 exited
<6>[   16.412013] init: waitpid returned pid 115, status = 00000100
<5>[   16.412034] init: process 'logger_private', pid 115 exited
<6>[   16.412211] init: waitpid returned pid 116, status = 00000000
<5>[   16.412232] init: process 'engsetmacaddr', pid 116 exited
<6>[   16.412375] init: waitpid returned pid 117, status = 00000000
<5>[   16.412395] init: process 'engsetbtmacaddr', pid 117 exited
<7>[   16.431747] ;Behind the equals sign said detected equipment corresponding to the name of the driver
<7>[   16.431757] ;Note: don't change the file format!
<7>[   16.431761] gsensor_module_name="stk8baxx"
<7>[   16.431765] ctp_module_name="gslX680new"
<7>[   16.431768] light sensor_module_name=""
<7>[   16.431772] gyr sensor_module_name=""
<7>[   16.431776] :strlen(src_string):239
<7>[   16.431790] sw_analytic_write_info:total_raw:7
<7>[   16.431797] config_info[6].str_info:
<7>[   16.431803] config_info[5].str_info:gyr sensor_module_name=""
<7>[   16.431808] 
<7>[   16.431814] config_info[4].str_info:light sensor_module_name=""
<7>[   16.431819] 
<7>[   16.431827] config_info[3].str_info:ctp_module_name="gslX680new"
<7>[   16.431832] 
<7>[   16.431837] config_info[2].str_info:gsensor_module_name="stk8baxx"
<7>[   16.431843] 
<7>[   16.431850] info:gsensor_module_name="stk8baxx"
<7>[   16.431855] , key_name:gsensor_module_name
<7>[   16.431864] ----ret : 21,s1 : 29---
<7>[   16.431868]  
<7>[   16.431874] name:stk8baxx
<7>[   16.431879] device_name:stk8baxx,write_id:2
<7>[   16.431888] number: 2 
<7>[   16.431894] number:16 now_number:2,scan_number:0
<7>[   16.431901] scan_number:0, now_number:2
<7>[   16.431915] sw_device_response_test: name = stk8baxx, addr = 0x18
<7>[   16.432220] I2C connection sucess!
<7>[   16.432235] addr:0x3d, response_addr:0x18
<7>[   16.432244] addr:0x22, response_addr:0x18
<7>[   16.432253] addr:0x18, response_addr:0x18
<7>[   16.432262] return number: 2 
<7>[   16.432271] -----sw_chip_id_detect:chip_id_reg value:0x0
<7>[   16.432283] from copy name:stk8baxx, strlen(name):8
<7>[   16.432294] sw_i2c_test: write_key_name:gsensor_module_name
<7>[   16.432302] write_flag:0
<7>[   16.432312] [sw_device]:sw_register_device_detect end!
<7>[   16.432318] [sw_device]:sw_register_device_detect begin!
<7>[   16.432336] ========sw_sysconfig_get_para===================
<7>[   16.432353] sw_sysconfig_get_para: device_unused. 
<4>[   16.432360] get sysconfig para erro!
<7>[   16.432366] [sw_device]:sw_register_device_detect end!
<7>[   16.432373] [sw_device]:sw_register_device_detect begin!
<7>[   16.432389] ========sw_sysconfig_get_para===================
<7>[   16.432401] sw_sysconfig_get_para: device_unused. 
<4>[   16.432408] get sysconfig para erro!
<7>[   16.432415] [sw_device]:sw_register_device_detect end!
<4>[   16.432459] ctp_wakeup: !!!!gpio data 1
<7>[   16.507126] SELinux: initialized (dev mmcblk0p2, type vfat), uses genfs_contexts
<4>[   16.701452] axp22_ldoio0: Failed to create debugfs directory
<4>[   16.707792] axp22_eldo2: Failed to create debugfs directory
<5>[   16.714098] [VFE]vfe sensor detect start! input_num = 0
<5>[   16.719945] [VFE]Find sensor name is "gc2035", i2c address is 78, type is "YUV" !
<6>[   16.720305] init: command 'chmod' r=0
<6>[   16.720520] init: waitpid returned pid 100, status = 00000000
<5>[   16.720538] init: process 'bootclone', pid 100 exited
<6>[   16.720718] init: waitpid returned pid 114, status = 00000000
<5>[   16.720736] init: process 'setserialno', pid 114 exited
<6>[   16.720874] init: processing action 0x59590 (queue_property_triggers)
<6>[   16.720975] init: command 'queue_property_triggers' r=0
<6>[   16.721009] init: processing action 0x4fbe8 (nonencrypted)
<6>[   16.721034] init: command 'class_start' r=0
<6>[   16.721053] init: processing action 0x4fee8 (property:sys.powerctl=*)
<3>[   16.721078] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
<3>[   16.721096] init: powerctl: cannot expand '${sys.powerctl}'
<6>[   16.721112] init: command 'powerctl' r=-22
<6>[   16.721131] init: processing action 0x4ff38 (property:sys.sysctl.extra_free_kbytes=*)
<3>[   16.721151] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
<3>[   16.721171] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
<6>[   16.721191] init: command 'write' r=-22
<6>[   16.721211] init: processing action 0x50300 (property:ro.debuggable=1)
<6>[   16.721420] init: computing context for service '/system/bin/sh'
<5>[   16.721711] init: starting 'console'
<6>[   16.722216] init: command 'start' r=0
<6>[   16.722308] init: processing action 0x542f0 (property:persist.sys.usb.config=*)
<6>[   16.722399] init: command 'setprop' r=0
<6>[   16.722425] init: processing action 0x57ea8 (property:sys.usb.config=mass_storage,adb)
<3>[   16.722555] android_usb: already disabled
<6>[   16.722585] init: command 'write' r=0
<6>[   16.722680] init: command 'write' r=0
<6>[   16.722767] init: command 'write' r=0
<6>[   16.722866] init: command 'write' r=0
<6>[   16.722947] init: command 'write' r=0
<5>[   16.723158] init: starting 'adbd'
<6>[   16.723570] init: command 'start' r=0
<6>[   16.723632] init: command 'setprop' r=0
<6>[   16.724441] init: Created socket '/dev/socket/adbd' with mode '660', user '1000', group '1000'
<6>[   16.726761] adb_open
<4>[   16.726797] ep_matches, wrn: endpoint already claimed, ep(0xc09870dc, 0xef1c07c0, ep1in-bulk)
<6>[   16.726811] adb_bind_config
<4>[   16.726820] ep_matches, wrn: endpoint already claimed, ep(0xc09870dc, 0xef1c07c0, ep1in-bulk)
<4>[   16.726830] ep_matches, wrn: endpoint already claimed, ep(0xc0987128, 0xef1c07c0, ep1out-bulk)
<4>[   16.726842] ep_matches, wrn: endpoint already claimed, ep(0xc09870dc, 0xef1c07c0, ep1in-bulk)
<4>[   16.726851] ep_matches, wrn: endpoint already claimed, ep(0xc0987128, 0xef1c07c0, ep1out-bulk)
<4>[   16.726861] ep_matches, wrn: endpoint already claimed, ep(0xc0987174, 0xef1c5cc0, ep2in-bulk)
<4>[   16.726872] [sw_udc]: alloc request: ep(0xc09871c0, ep2out-bulk, 512), req(0xeeab1340)
<4>[   16.726886] [sw_udc]: alloc request: ep(0xc0987174, ep2in-bulk, 512), req(0xee4a3240)
<4>[   16.726898] [sw_udc]: alloc request: ep(0xc0987174, ep2in-bulk, 512), req(0xee4a31c0)
<4>[   16.726910] [sw_udc]: alloc request: ep(0xc0987174, ep2in-bulk, 512), req(0xee4a3140)
<4>[   16.726921] [sw_udc]: alloc request: ep(0xc0987174, ep2in-bulk, 512), req(0xee4a30c0)
<4>[   16.726936] [sw_udc]: sunxi_udc_pullup, is_on = 1
<4>[   16.726945] sunxi_udc_set_pullup_2317: usb device is not active
<5>[   17.050370] [VFE]Sub device register "gc2035" i2c_addr = 0x78 start!
<5>[   17.061601] [VFE]registered sensor subdev is OK!
<7>[   17.066769] [VFE_DEBUG]ccm_cfg pt = edcb04fc
<7>[   17.071783] [VFE_DEBUG]ccm_cfg->sd = ee990180
<7>[   17.076652] [VFE_DEBUG]module vflip = 0 hflip = 0
<7>[   17.081978] [VFE_DEBUG]module vflip_thumb = 0 hflip_thumb = 0
<7>[   17.088391] [VFE_DEBUG]module is_isp_used = 0 is_bayer_raw= 0
<5>[   17.094898] [VFE]Check sensor!
<7>[   17.098461] [VFE_DEBUG]set regulator iovdd = 2800000,return 0
<7>[   17.105058] [VFE_DEBUG]iovdd_on_off_cnt = 1!
<7>[   17.120130] [sw_device]:sw_register_device_detect begin!
<5>[   17.126189] [VFE]mclk on
<7>[   17.129055] [VFE_DEBUG]os_gpio_write, hdl is NULL
<7>[   17.134400] [VFE_DEBUG]set regulator iovdd = 2800000,return 0
<7>[   17.135950] ========sw_sysconfig_get_para===================
<7>[   17.135971] sw_sysconfig_get_para: device_twi_id is 0. 
<4>[   17.135982] get_device_para_value:get subname:hyn_cst2xx error! val.val:0 
<7>[   17.135990] keyname:ctp_list_para  subname:hyn_cst2xx ,get error!
<4>[   17.135997] get_detect_list: script_get_item err.support_number = 12. 
<7>[   17.136101] ;Behind the equals sign said detected equipment corresponding to the name of the driver
<7>[   17.136108] ;Note: don't change the file format!
<7>[   17.136113] gsensor_module_name="stk8baxx"
<7>[   17.136116] ctp_module_name="gslX680new"
<7>[   17.136120] light sensor_module_name=""
<7>[   17.136124] gyr sensor_module_name=""
<7>[   17.136127] :strlen(src_string):239
<7>[   17.136139] sw_analytic_write_info:total_raw:7
<7>[   17.136146] config_info[6].str_info:
<7>[   17.136152] config_info[5].str_info:gyr sensor_module_name=""
<7>[   17.136157] 
<7>[   17.136162] config_info[4].str_info:light sensor_module_name=""
<7>[   17.136167] 
<7>[   17.136172] config_info[3].str_info:ctp_module_name="gslX680new"
<7>[   17.136177] 
<7>[   17.136182] info:ctp_module_name="gslX680new"
<7>[   17.136186] , key_name:ctp_module_name
<7>[   17.136194] ----ret : 17,s1 : 27---
<7>[   17.136198]  
<7>[   17.136202] name:gslX680new
<7>[   17.136208] device_name:gslX680new,write_id:3
<7>[   17.136215] number: 3 
<7>[   17.136221] number:13 now_number:3,scan_number:0
<7>[   17.136228] scan_number:0, now_number:3
<7>[   17.136240] sw_device_response_test: name = gslX680new, addr = 0x40
<7>[   17.136452] I2C connection sucess!
<7>[   17.136461] addr:0x20, response_addr:0x40
<7>[   17.136467] addr:0x1a, response_addr:0x40
<7>[   17.136473] addr:0x40, response_addr:0x40
<7>[   17.136479] return number: 3 
<7>[   17.136484] -----sw_chip_id_detect:chip_id_reg value:0x0
<7>[   17.136492] from copy name:gslX680new, strlen(name):10
<7>[   17.136499] sw_i2c_test: write_key_name:ctp_module_name
<7>[   17.136507] write_flag:0
<7>[   17.136513] [sw_device]:sw_register_device_detect end!
<7>[   17.136631] [sw_device]:sw_devices_events end!
<7>[   17.236273] [VFE_DEBUG]regulator_is already enabled
<7>[   17.331341] [VFE_DEBUG]iovdd_on_off_cnt = 2!
<3>[   17.347471] meminfo2=1000
<7>[   17.350588] [VFE_DEBUG]set regulator avdd = 2800000,return 0
<7>[   17.351334] [VFE_DEBUG]set regulator dvdd = 1800000,return 0
<7>[   17.395097] [VFE_DEBUG]power_on______________________________
<4>[   17.402232] [CSI][GC2035]V4L2_IDENT_SENSOR=2035
<3>[   17.412766] meminfo2=1000
<6>[   17.457544] init: computing context for service '/system/bin/bootanimation'
<5>[   17.466045] init: starting 'bootanim'
<4>[   17.851777] ###########close all layers 0
<4>[   17.920473] ###########close all layers 0
<4>[   18.020162] [VFE_WARN]os_gpio_set_status, hdl is NULL
<7>[   18.025810] [VFE_DEBUG]os_gpio_write, hdl is NULL
<4>[   18.031134] [CSI][GC2035]disalbe oe!
<4>[   18.035153] [VFE_WARN]os_gpio_set_status, hdl is NULL
<7>[   18.040826] [VFE_DEBUG]os_gpio_write, hdl is NULL
<5>[   18.058161] [VFE]mclk off
<5>[   18.061180] [VFE]Sub device register "gc2035" is OK!
<5>[   18.066709] [VFE]sensor_i2c_board->type = gc2035,regster_ccm = gc2035.
<7>[   18.074011] [VFE_DEBUG]dev->ccm_cfg[0] = edcb04fc
<7>[   18.079242] [VFE_DEBUG]dev->ccm_cfg[0]->sd = ee990180
<7>[   18.084904] [VFE_DEBUG]dev->ccm_cfg[0]->power.iovdd = edc22500
<7>[   18.091412] [VFE_DEBUG]dev->ccm_cfg[0]->power.avdd = edc224c0
<7>[   18.097809] [VFE_DEBUG]dev->ccm_cfg[0]->power.dvdd = edc22440
<7>[   18.104277] [VFE_DEBUG]dev->ccm_cfg[0]->power.afvdd =   (null)
<5>[   18.110782] [VFE]v4l2 subdev register input_num = 1
<4>[   18.116247] axp22_dldo3: Failed to create debugfs directory
<4>[   18.122531] axp22_ldoio0: Failed to create debugfs directory
<4>[   18.128862] axp22_eldo2: Failed to create debugfs directory
<4>[   18.130265] 
<4>[   18.130272] 
<4>[   18.130274] insmod_device_driver
<4>[   18.130278] 
<4>[   18.130283] [sw_udc]: sunxi_usb_device_enable start
<4>[   18.130291] [sw_udc]: usb_vbase  = 0xf1c19000
<4>[   18.130299] [sw_udc]: sram_vbase = 0xf1c00000
<4>[   18.130319] [sw_udc]: open_usb_clock
<4>[   18.130370] [sw_udc]: usbd_stop_work
<4>[   18.130411] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED: USBC_TS_MODE_HS
<4>[   18.130421] [sw_udc]: usbd_start_work
<4>[   18.130427] [sw_udc]: usbd_start_work
<4>[   18.130433] [sw_udc]: sunxi_usb_device_enable end
<4>[   18.186134] [sw_udc]: IRQ: suspend
<4>[   18.186143] [sw_udc]: ERR: usb speed is unkown
<5>[   18.195397] [VFE]vfe sensor detect start! input_num = 1
<5>[   18.201228] [VFE]Find sensor name is "gc0328", i2c address is 42, type is "YUV" !
<5>[   18.209554] [VFE]Sub device register "gc0328" i2c_addr = 0x42 start!
<5>[   18.217466] [VFE]registered sensor subdev is OK!
<7>[   18.222665] [VFE_DEBUG]ccm_cfg pt = edcb07c8
<7>[   18.227413] [VFE_DEBUG]ccm_cfg->sd = ede1ee80
<7>[   18.232291] [VFE_DEBUG]module vflip = 0 hflip = 0
<7>[   18.237524] [VFE_DEBUG]module vflip_thumb = 0 hflip_thumb = 0
<7>[   18.243941] [VFE_DEBUG]module is_isp_used = 0 is_bayer_raw= 0
<5>[   18.250344] [VFE]Check sensor!
<7>[   18.253827] [VFE_DEBUG]set regulator iovdd = 2800000,return 0
<7>[   18.260279] [VFE_DEBUG]regulator_is already enabled
<7>[   18.265704] [VFE_DEBUG]iovdd_on_off_cnt = 3!
<4>[   18.282572] [VFE_WARN]os_gpio_set_status, hdl is NULL
<7>[   18.288211] [VFE_DEBUG]os_gpio_write, hdl is NULL
<7>[   18.293469] [VFE_DEBUG]os_gpio_write, hdl is NULL
<5>[   18.310070] [VFE]mclk on
<7>[   18.324936] [VFE_DEBUG]set regulator iovdd = 2800000,return 0
<7>[   18.331405] [VFE_DEBUG]regulator_is already enabled
<7>[   18.336826] [VFE_DEBUG]iovdd_on_off_cnt = 4!
<7>[   18.341673] [VFE_DEBUG]set regulator avdd = 2800000,return 0
<7>[   18.348010] [VFE_DEBUG]regulator_is already enabled
<7>[   18.353518] [VFE_DEBUG]set regulator dvdd = 1800000,return 0
<4>[   18.358055] [sw_udc]: IRQ: reset
<4>[   18.358065] (1:star,2:end): vfs_read:0, vfs_write:0,dma_working:0,amount:0,file_offset:0
<4>[   18.358077] [sw_udc]: irq: reset happen, throw away all urb
<7>[   18.378776] [VFE_DEBUG]regulator_is already enabled
<6>[   18.379862] healthd: battery l=57 v=3890 t=30.0 h=2 st=2 c=345 chg=u
<6>[   18.392619] healthd: battery l=57 v=3890 t=30.0 h=2 st=2 c=345 chg=u
<7>[   18.415387] [VFE_DEBUG]os_gpio_write, hdl is NULL
<4>[   18.421620] [sw_udc]: 
<4>[   18.424045] +++++++++++++++++++++++++++++++++++++
<4>[   18.429451] [sw_udc]:  usb enter high speed.
<7>[   18.432677] [VFE_DEBUG]power_on______________________________
<4>[   18.432687] gc0328------------------------------------------james--16-47[sw_udc]: 
<4>[   18.431607] +++++++++++++++++++++++++++++++++++++
<4>[   18.459052] [sw_udc]: IRQ: reset
<4>[   18.462641] (1:star,2:end): vfs_read:0, vfs_write:0,dma_working:0,amount:0,file_offset:0
<4>[   18.469045] [sw_udc]: irq: reset happen, throw away all urb
<6>[   18.479261] healthd: battery l=57 v=3890 t=30.0 h=2 st=2 c=345 chg=u
<6>[   18.487351] healthd: battery l=57 v=3890 t=30.0 h=2 st=2 c=345 chg=u
<4>[   18.531757] [sw_udc]: Set address 63
<6>[   18.546969] android_usb gadget: high-speed config #1: android
<4>[   18.553372] [sw_udc]: ep enable: ep2(0xc0987174, ep2in-bulk, 128, 512)
<4>[   18.556944] [sw_udc]: ep enable: ep2(0xc0987174, ep2in-bulk, 128, 512), fifo(2560, 1024, 1)
<4>[   18.556944] [sw_udc]: ep enable: ep2(0xc09871c0, ep2out-bulk, 0, 512)
<4>[   18.556944] [sw_udc]: ep enable: ep2(0xc09871c0, ep2out-bulk, 0, 512), fifo(3584, 1024, 1)
<4>[   18.586436] [sw_udc]: ep enable: ep1(0xc09870dc, ep1in-bulk, 128, 512)
<4>[   18.593734] [sw_udc]: ep enable: ep1(0xc09870dc, ep1in-bulk, 128, 512), fifo(512, 1024, 1)
<4>[   18.603093] [sw_udc]: ep enable: ep1(0xc0987128, ep1out-bulk, 0, 512)
<4>[   18.610601] [sw_udc]: ep enable: ep1(0xc0987128, ep1out-bulk, 0, 512), fifo(1536, 1024, 1)
<4>[   18.619799] [sw_udc]: alloc request: ep(0xc09870dc, ep1in-bulk, 512), req(0xee7608c0)
<4>[   18.628596] [sw_udc]: alloc request: ep(0xc0987128, ep1out-bulk, 512), req(0xede1fbc0)
<4>[   18.637441] [sw_udc]: alloc request: ep(0xc09870dc, ep1in-bulk, 512), req(0xede1f8c0)
<4>[   18.646198] [sw_udc]: alloc request: ep(0xc0987128, ep1out-bulk, 512), req(0xede1f840)
<7>[   19.140121] [FL_ERR]error flash config!
<5>[   19.154994] [VFE]mclk off
<5>[   19.157944] [VFE]Sub device register "gc0328" is OK!
<5>[   19.163567] [VFE]sensor_i2c_board->type = gc0328,regster_ccm = gc0328.
<7>[   19.170917] [VFE_DEBUG]dev->ccm_cfg[1] = edcb07c8
<7>[   19.176166] [VFE_DEBUG]dev->ccm_cfg[1]->sd = ede1ee80
<7>[   19.181901] [VFE_DEBUG]dev->ccm_cfg[1]->power.iovdd = edcc22c0
<7>[   19.188408] [VFE_DEBUG]dev->ccm_cfg[1]->power.avdd = edcc2a40
<7>[   19.194868] [VFE_DEBUG]dev->ccm_cfg[1]->power.dvdd = edcc2b40
<7>[   19.201316] [VFE_DEBUG]dev->ccm_cfg[1]->power.afvdd =   (null)
<5>[   19.208532] [VFE]V4L2 device registered as video0
<5>[   19.213910] [VFE]register_early_suspend @ probe handle!
<5>[   19.219929] [VFE]probe_work_handle end!
<6>[   20.581949] healthd: battery l=58 v=3822 t=30.0 h=2 st=2 c=66 chg=u
<4>[   23.920976] WRN:L1111(drivers/usb/sunxi_usb/udc/sunxi_udc.c):handle_ep0: ep0 setup end
<4>[   23.929794] nuke: ep num is 0
<6>[   31.296100] warning: `zygote' uses 32-bit capabilities (legacy support in use)
<4>[   31.513802] stk8baxx_init
<4>[   31.516716] 2797 stk8baxx_init 
<4>[   31.520240] 2807 stk8baxx_init 
<6>[   31.523956] gsensor_detect: Detected chip stk8baxx at adapter 1, address 0x18
<6>[   31.532788] stk8ba50_probe: driver version:3.5.0
<4>[   31.537924] 2548 stk8baxx_probe
<4>[   31.541450] ede0d988  -283436992
<6>[   31.545503] STK8BAXX_Init:issue sw reset to 0x18, result=0
<6>[   31.570038] STK8BAXX_Init Revise I2C Address = 0x18
<3>[   31.578689] STK8BAXX_Init:return to suspend mode after init
<6>[   31.585358] input: stk8baxx as /devices/virtual/input/input4
<4>[   31.643634] gslX680new: no versions for exported symbols: kernel tainted.
<4>[   31.651225] Disabling lock debugging due to kernel taint
<6>[   31.658484] =====ctp_fetch_sysconfig_para=====. 
<3>[   31.663650] ctp_fetch_sysconfig_para: ctp_power_io script_get_item err. 
<4>[   31.671108] ctp_wakeup gpio number is 39
<4>[   31.675458] ctp_irq gpio number is 37
<4>[   31.679849] axp22_ldoio1: Failed to create debugfs directory
<4>[   31.750293] i2c-core: driver [gslX680] using legacy suspend method
<4>[   31.757154] i2c-core: driver [gslX680] using legacy resume method
<6>[   31.763950] ctp_detect: addr= 40
<6>[   31.767723] I2C connection sucess!
<6>[   31.771512] 
<6>[   31.771515]  												  
<6>[   31.771518] +++++++++++++++++++++++++++++++++ 												  
<6>[   31.771523] ++++++ GSLX680 new used +++++++++ 												  
<6>[   31.771527] +++++++++++++++++++++++++++++++++ 												  
<4>[   31.796214] GSLX680 Enter gsl_ts_probe
<4>[   31.801060] [GSLX680] Enter gsl_ts_init_ts
<6>[   31.806027] input: gslX680 as /devices/platform/twi.0/i2c-0/0-0040/input/input5
<4>[   31.815336] [GSLX680] End gsl_ts_probe
<4>[   31.819544] ****************************************************************
<6>[   31.828370] init: processing action 0x50598 (property:sys.sensors=1)
<6>[   31.835664] init: computing context for service '/system/bin/busybox'
<5>[   31.843122] init: starting 'sensors'
<6>[   31.847667] init: command 'start' r=0
<6>[   31.861737] init: waitpid returned pid 471, status = 00000000
<5>[   31.868136] init: process 'sensors', pid 471 exited
<4>[   32.260047] =============gsl_load_fw start==============
<3>[   32.720454] stk8baxx_get_file_content: filp_open error, no offset file!
<3>[   32.727860] stk8baxx_store_in_file: filp_open error!
<6>[   32.733498] STK8BAXX_LoadCali: cali_status=0xff
<3>[   32.799100] meminfo2=1000
<4>[   32.814570] =============gsl_load_fw end==============
<3>[   32.920467] #########check mem read 0xb0 = 5a 5a 5a 5a #########
<4>[   32.927352] ------------[ cut here ]------------
<4>[   32.930438] WARNING: at kernel/irq/manage.c:428 __enable_irq+0x88/0xd0()
<4>[   32.930438] Unbalanced enable for IRQ 5
<4>[   32.930438] Modules linked in: gslX680new(F) stk8baxx sunxi_schw(O) cdc_ether rtl8150 mcs7830 qf9700 asix usbnet sunxi_keyboard sw_device vfe_v4l2 s5k4ec sp0a19 sp2519 sp0838 siv121d bf3920 bf3703 bf3a03 hi704 gc2155 gc2145 gc2035 gc0309 gc0329 gc0312 gc0308 gc0328 vfe_subdev vfe_os cci cam_detect videobuf_dma_contig videobuf_core leds_sunxi mali(O) lcd disp nand(O)
<4>[   32.930438] [<c00186c4>] (unwind_backtrace+0x0/0x128) from [<c062ea0c>] (dump_stack+0x20/0x24)
<4>[   32.930438] [<c062ea0c>] (dump_stack+0x20/0x24) from [<c0036880>] (warn_slowpath_common+0x5c/0x74)
<4>[   32.930438] [<c0036880>] (warn_slowpath_common+0x5c/0x74) from [<c0036954>] (warn_slowpath_fmt+0x40/0x48)
<4>[   32.930438] [<c0036954>] (warn_slowpath_fmt+0x40/0x48) from [<c00a1bb8>] (__enable_irq+0x88/0xd0)
<4>[   32.930438] [<c00a1bb8>] (__enable_irq+0x88/0xd0) from [<c00a1c64>] (enable_irq+0x64/0x84)
<4>[   32.930438] [<c00a1c64>] (enable_irq+0x64/0x84) from [<c03b06c0>] (input_set_int_enable+0x4c/0x64)
<4>[   32.930438] [<c03b06c0>] (input_set_int_enable+0x4c/0x64) from [<bf3468e8>] (gslX680_init_events+0xb0/0xe8 [gslX680new])
<4>[   32.930438] [<bf3468e8>] (gslX680_init_events+0xb0/0xe8 [gslX680new]) from [<c00501b8>] (process_one_work+0x294/0x48c)
<4>[   32.930438] [<c00501b8>] (process_one_work+0x294/0x48c) from [<c0050724>] (worker_thread+0x1a8/0x2a4)
<4>[   32.930438] [<c0050724>] (worker_thread+0x1a8/0x2a4) from [<c00554a4>] (kthread+0x9c/0xa8)
<4>[   32.930438] [<c00554a4>] (kthread+0x9c/0xa8) from [<c0011a04>] (kernel_thread_exit+0x0/0x8)
<4>[   32.930438] ---[ end trace 10ca488f521b37e1 ]---
<6>[   39.892447] init: processing action 0x506a8 (property:sys.lights_leds=1)
<6>[   39.896562] healthd: battery l=58 v=3810 t=30.0 h=2 st=2 c=103 chg=u
<6>[   39.902642] request_suspend_state: wakeup (3->0) at 39902619021 (1970-04-25 03:31:33.110380351 UTC)
<6>[   39.917411] init: computing context for service '/system/bin/lights_leds.sh'
<5>[   39.927047] init: starting 'lights_leds'
<6>[   39.932242] init: command 'start' r=0
<6>[   39.936801] init: waitpid returned pid 489, status = 00000000
<5>[   39.943337] init: process 'lights_leds', pid 489 exited
<3>[   39.974930] stk8baxx_get_file_content: filp_open error, no offset file!
<3>[   39.982352] stk8baxx_store_in_file: filp_open error!
<6>[   39.987860] STK8BAXX_LoadCali: cali_status=0xff
<6>[   39.992924] STK8BAXX_SetEnable:1
<4>[   40.087658] lowmem_shrink: convert oom_adj to oom_score_adj:
<4>[   40.094056] oom_adj 0 => oom_score_adj 0
<4>[   40.098408] oom_adj 1 => oom_score_adj 58
<4>[   40.102876] oom_adj 2 => oom_score_adj 117
<4>[   40.107419] oom_adj 4 => oom_score_adj 235
<4>[   40.111992] oom_adj 9 => oom_score_adj 529
<4>[   40.116535] oom_adj 15 => oom_score_adj 1000
<6>[   40.124512] init: processing action 0x4ff38 (property:sys.sysctl.extra_free_kbytes=*)
<6>[   40.134131] init: command 'write' r=0
<6>[   41.795786] acc_open
<6>[   41.798235] acc_release
<4>[   42.064057] RTL871X: module init start
<4>[   42.068242] RTL871X: rtl8723cs v4.3.22.12_18037.20160602_BTCOEX20160218-0900
<4>[   42.076660] RTL871X: build time: Oct 18 2016 10:13:48
<4>[   42.082449] RTL871X: rtl8723cs BT-Coex version = BTCOEX20160218-0900
<4>[   42.089561] RTL871X: ----- platform_wifi_power_on sdc_id: 1, mod_sel: 9
<4>[   42.097217] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[   42.108603] [mmc]: sdc1 card_power_on start...
<4>[   42.114357] [mmc]: sdc1 power_supply is null
<4>[   42.119225] [mmc]: sdc1 card_power_on ok
<4>[   42.140126] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[   42.150716] [mmc]: mclk 0xf1c2008c 0x8002000e
<4>[   42.197177] gpio rtl8723cs_wl_regon set val 1, act val 1
<4>[   42.232513] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 52,  RTO !!
<4>[   42.241732] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 52,  RTO !!
<4>[   42.249956] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[   42.260341] [mmc]: mclk 0xf1c2008c 0x8002000e
<4>[   42.310587] [rtl8723cs]: sdio wifi power state: on
<4>[   42.316035] RTL871X: platform_wifi_power_on: power up, rescan card.
<4>[   42.322558] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[   42.322705] [mmc]: mclk 0xf1c2008c 0x8002000e
<4>[   42.338634] RTL871X: module init ret=0
<4>[   42.379884] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 8,  RTO !!
<6>[   42.388151] *******************Try sdio*******************
<4>[   42.394818] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[   42.405558] [mmc]: mclk 0xf1c2008c 0x8002000e
<4>[   42.480551] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
<4>[   42.492068] [mmc]: mclk 0xf1c2008c 0x8002000e
<4>[   42.550143] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
<4>[   42.560815] [mmc]: mclk 0xf1c2008c 0x8100000b
<4>[   42.620192] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
<4>[   42.631519] [mmc]: mclk 0xf1c2008c 0x8140030b
<6>[   42.691476] mmc2: new high speed SDIO card at address 0001
<4>[   42.699293] RTL871X: CHIP TYPE: RTL8703B
<4>[   42.704532] RTL871X: rtw_hal_config_rftype RF_Type is 3 TotalTxPath is 1 
<4>[   42.712262] RTL871X: Chip Version Info: CHIP_8703B_Normal_Chip_TSMC_B_CUT_1T1R_RomVer(0)
<4>[   42.726059] RTL871X: SetHwReg8703B: bMacPwrCtrlOn=1
<4>[   42.732343] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
<4>[   42.739636] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
<4>[   42.748400] RTL871X: PowerOnCheck: 0x1B8 test Pass.
<4>[   42.754677] RTL871X: ReadAdapterInfo8703BS, 0x4e=0xe2
<4>[   42.760479] RTL871X: EEPROM type is E-FUSE
<4>[   42.765451] RTL871X: hal_EfuseSwitchToBank: Efuse switch bank to 0
<4>[   42.777028] RTL871X: hal_ReadEFuse_WiFi: data end at address=0x16
<4>[   42.784177] RTL871X: Efuse Realmap:
<4>[   42.786295] wait for reg load finish time out zhangjl ==================================================================
<4>[   42.787347] wait for reg load finish time out zhangjl ==================================================================
<4>[   42.813227] 
<4>[   42.814905] 29 81 03 7C E1 00 28 00 B3 04 65 45 10 06 40 02 
<4>[   42.821323] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.827701] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.834500] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.840952] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.847302] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.853696] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.860076] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.866427] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.872849] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.879217] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.885667] FF FF FF FF FF FF FF FF FF FF 37 FF FF FF FF FF 
<4>[   42.892080] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.898457] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.904882] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.911311] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.917663] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.924041] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.930694] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.937060] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.943453] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.949804] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.956212] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.962620] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.968990] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.975442] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.982024] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.988397] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   42.994790] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   43.001186] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   43.007545] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   43.014194] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 
<4>[   43.042364] RTL871X: efuse file: /system/etc/wifi/wifi_efuse_8723cs.map
<4>[   43.049716] RTL871X: 0x000: 29 81 03 7C E1 00 28 00    B3 04 65 45 10 86 40 02
<4>[   43.057844] RTL871X: 0x010: 27 27 27 27 27 27 2C 2C    2C 2C 2C 02 FF FF FF FF
<4>[   43.065970] RTL871X: 0x020: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.074089] RTL871X: 0x030: FF FF FF FF FF FF FF FF    FF FF 2C 2C 2C 2C 2C 2C
<4>[   43.082458] RTL871X: 0x040: 2E 2E 2E 2E 2E 02 FF FF    FF FF FF FF FF FF FF FF
<4>[   43.090576] RTL871X: 0x050: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.098677] RTL871X: 0x060: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.106832] RTL871X: 0x070: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.114946] RTL871X: 0x080: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.123084] RTL871X: 0x090: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.131254] RTL871X: 0x0a0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.139380] RTL871X: 0x0b0: FF FF FF FF FF FF FF FF    20 20 1E 00 00 00 FF FF
<4>[   43.147526] RTL871X: 0x0c0: FF 39 20 11 00 00 00 FF    00 FF 12 FF FF FF FF FF
<4>[   43.155726] RTL871X: 0x0d0: 3E 10 01 02 23 00 80 FF    20 04 4C 02 03 B7 21 02
<4>[   43.163916] RTL871X: 0x0e0: 0C 00 22 04 00 08 00 32    FF 21 02 0C 00 22 2A 01
<4>[   43.172210] RTL871X: 0x0f0: 01 00 00 00 00 00 00 00    00 00 00 00 02 00 FF FF
<4>[   43.180603] RTL871X: 0x100: 00 00 00 00 00 00 00 00    00 00 00 00 00 00 00 00
<4>[   43.188838] RTL871X: 0x110: 00 EB 00 6E 01 00 00 00    00 FF FF FF FF FF FF FF
<4>[   43.197062] RTL871X: 0x120: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.205273] RTL871X: 0x130: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.213510] RTL871X: 0x140: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.221771] RTL871X: 0x150: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.229951] RTL871X: 0x160: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.238265] RTL871X: 0x170: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.246528] RTL871X: 0x180: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.254660] RTL871X: 0x190: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.262768] RTL871X: 0x1a0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.270885] RTL871X: 0x1b0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.278993] RTL871X: 0x1c0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.287104] RTL871X: 0x1d0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.295242] RTL871X: 0x1e0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.303376] RTL871X: 0x1f0: FF FF FF FF FF FF FF FF    FF FF FF FF FF FF FF FF
<4>[   43.311493] 
<4>[   43.313355] RTL871X: hal_EfuseSwitchToBank: Efuse switch bank to 0
<4>[   43.324190] RTL871X: hal_ReadEFuse_WiFi: data end at address=0x16
<4>[   43.331077] RTL871X: Efuse Realmap:
<4>[   43.335209] 
<4>[   43.337918] FF FF FF FF FF FF 
<4>[   43.341876] RTL871X: wifi_mac file: /data/wifimac.txt
<4>[   43.347570] RTL871X: a4:6a:1f:62:17:44
<4>[   43.352104] RTL871X: Hal_EfuseParseBTCoexistInfo_8703B: Enable BT-coex, ant_num=1
<4>[   43.360550] RTL871X: Hal_EfuseParseVoltage_8703B hwinfo[EEPROM_Voltage_ADDR_8703B] =b3 
<4>[   43.369541] RTL871X: Hal_EfuseParseVoltage_8703B pHalData->adjuseVoltageVal =b 
<4>[   43.378097] RTL871X: Hal_ReadRFGainOffset, kfree config:0
<4>[   43.385653] RTL871X: kfree flag:1
<4>[   43.389463] RTL871X: bb_gain:0
<4>[   43.393407] RTL871X: rtl8703b_FirmwareDownload fw: FW_NIC, size: 20944
<4>[   43.401133] RTL871X: rtl8703b_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x3b2, Month=11, Date=26, Hour=17, Minute=21
<4>[   43.413555] RTL871X: rtl8703b_FirmwareDownload(): Shift for fw header!
<4>[   43.421106] RTL871X: rtl8703b_FirmwareDownload by IO write!
<4>[   43.575090] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x07050305
<4>[   43.587852] RTL871X: _8051Reset8703: Finish
<4>[   43.601618] RTL871X: _FWFreeToGo: Polling FW ready OK! (119, 20ms), REG_MCUFWDL:0x070503c6
<4>[   43.610890] RTL871X: rtl8703b_FirmwareDownload: DLFW OK !
<4>[   43.616935] RTL871X: rtl8703b_FirmwareDownload success. write_fw:1, 190ms
<4>[   43.624575] RTL871X:  <=== rtl8703b_FirmwareDownload()
<4>[   43.630906] RTL871X: hal_read_mac_hidden_rpt OK! (1, 0ms), fwdl:1, id:0x19
<4>[   43.639568] RTL871X: SetHwReg8703B: bMacPwrCtrlOn=0
<4>[   43.646392] RTL871X: rtw_hal_read_chip_info in 920 ms
<4>[   43.653311] RTL871X: init_channel_set((null)) ChannelPlan ID:0x20, ch num:13
<4>[   43.662647] RTL871X: rtw_alloc_macid((null)) if1, hwaddr:ff:ff:ff:ff:ff:ff macid:1
<4>[   43.671422] RTL871X: rtw_register_early_suspend
<4>[   43.676703] RTL871X: Init_ODM_ComInfo_8703b(): fab_ver=0 cut_ver=1
<4>[   43.683798] RTL871X: rtw_macaddr_cfg mac addr:a4:6a:1f:62:17:44
<4>[   43.690863] RTL871X: bDriverStopped:True, bSurpriseRemoved:False, bup:0, hw_init_completed:0
<4>[   43.701551] RTL871X: init_channel_set((null)) ChannelPlan ID:0x20, ch num:13
<4>[   43.711714] RTL871X: rtw_alloc_macid((null)) if2, hwaddr:ff:ff:ff:ff:ff:ff macid:1
<4>[   43.720511] RTL871X: rtw_wiphy_alloc(phy0)
<4>[   43.725134] RTL871X: rtw_wdev_alloc(padapter=f37c4000)
<4>[   43.731891] RTL871X: rtw_wiphy_alloc(phy1)
<4>[   43.736790] RTL871X: rtw_wdev_alloc(padapter=f3a35000)
<4>[   43.742839] RTL871X: rtw_wiphy_register(phy0)
<4>[   43.750318] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=a4:6a:1f:62:17:44
<4>[   43.762317] RTL871X: rtw_wiphy_register(phy1)
<4>[   43.769464] RTL871X: rtw_ndev_init(p2p0) if2 mac_addr=a6:6a:1f:62:17:44
<6>[   43.788037] *******************sdio init ok*******************
<6>[   44.018349] init: computing context for service '/system/bin/wpa_supplicant'
<5>[   44.027636] init: starting 'p2p_supplicant'
<6>[   44.045987] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010'
<4>[   44.499921] RTL871X: +871x_drv - if2_open, bup=0
<4>[   44.505334] RTL871X: +871x_drv - drv_open, bup=0
<4>[   44.510690] RTL871X: FW does not exist before power on!!
<4>[   44.521023] RTL871X: SetHwReg8703B: bMacPwrCtrlOn=1
<4>[   44.527539] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
<4>[   44.534962] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
<4>[   44.544194] RTL871X: PowerOnCheck: 0x1B8 test Pass.
<4>[   44.550493] RTL871X: Power on ok!
<4>[   44.554843] RTL871X: rtl8703b_FirmwareDownload fw: FW_NIC, size: 20944
<4>[   44.562243] RTL871X: rtl8703b_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x3b2, Month=11, Date=26, Hour=17, Minute=21
<4>[   44.574399] RTL871X: rtl8703b_FirmwareDownload(): Shift for fw header!
<4>[   44.581836] RTL871X: rtl8703b_FirmwareDownload by IO write!
<7>[   44.672534] SELinux: initialized (dev mmcblk0p1, type vfat), uses genfs_contexts
<3>[   44.772462] init: no such service 'fuse_sdcard'
<4>[   44.775183] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050305
<4>[   44.775554] RTL871X: _8051Reset8703: Finish
<4>[   44.789397] RTL871X: _FWFreeToGo: Polling FW ready OK! (158, 0ms), REG_MCUFWDL:0x000503c6
<4>[   44.789410] RTL871X: rtl8703b_FirmwareDownload: DLFW OK !
<4>[   44.789418] RTL871X: rtl8703b_FirmwareDownload success. write_fw:1, 190ms
<4>[   44.789462] RTL871X:  <=== rtl8703b_FirmwareDownload()
<4>[   44.789471] RTL871X: HalDetectPwrDownMode(): PDN=0
<4>[   44.789478] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
<4>[   45.017888] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[   45.025279] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[   45.042164] RTL871X: pDM_Odm TxPowerTrackControl = 1
<4>[   45.047875] RTL871X: pDM_Odm TxPowerTrackControl = 1
<4>[   45.303580] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[   45.310369] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[   45.317506] RTL871X: #### hw_var_set_opmode() -5398 iface_type(0) mode = 2 ####
<4>[   45.325760] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:0
<4>[   45.336022] RTL871X: kfree gain_offset 0x55:0x8206e RTL871X:  after :0x206e
<4>[   45.344859] RTL871X: MAC Address = a4:6a:1f:62:17:44
<4>[   45.350816] RTL871X: start rtl8703bs_xmit_thread(wlan0)
<4>[   45.356882] RTL871X: rtw_cfg80211_init_wiphy:rf_type=3
<4>[   45.362656] RTL871X: [HT] HAL Support STBC = 0x01
<4>[   45.367930] RTL871X: +871x_drv - if2_open, bup=0
<4>[   45.373215] RTL871X: start rtl8703bs_xmit_thread(p2p0)
<4>[   45.379205] RTL871X: rtw_cfg80211_init_wiphy:rf_type=3
<4>[   45.384992] RTL871X: [HT] HAL Support STBC = 0x01
<4>[   45.390364] RTL871X: -871x_drv - if2_open, bup=1
<4>[   45.395589] RTL871X: -871x_drv - drv_open, bup=1
<4>[   45.400788] RTL871X: -871x_drv - if2_open, bup=1
<4>[   45.406096] RTL871X: cfg80211_rtw_set_power_mgmt(p2p0) enabled:1, timeout:-1
<6>[   45.414715] ADDRCONF(NETDEV_UP): p2p0: link is not ready
<4>[   45.480681] RTL871X: cfg80211_rtw_flush_pmksa(p2p0)
<4>[   45.552540] RTL871X: cfg80211_rtw_change_station(p2p0)
<4>[   45.559039] RTL871X: cfg80211_rtw_change_station(p2p0)
<4>[   45.566638] RTL871X: cfg80211_rtw_change_station(p2p0)
<4>[   45.585435] RTL871X: +871x_drv - drv_open, bup=1
<4>[   45.591644] RTL871X: -871x_drv - drv_open, bup=1
<4>[   45.598002] RTL871X: cfg80211_rtw_set_power_mgmt(wlan0) enabled:1, timeout:-1
<6>[   45.607040] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>[   45.670973] RTL871X: cfg80211_rtw_flush_pmksa(wlan0)
<4>[   45.731283] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[   45.738432] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[   45.744796] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[   45.779041] RTL871X: rtw_android_priv_cmd: Android private cmd "BTCOEXSCAN-STOP" on wlan0
<4>[   45.795664] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-STOP" on wlan0
<4>[   45.806211] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-ADD 3" on wlan0
<4>[   45.816717] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<4>[   45.827286] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-STOP" on wlan0
<4>[   45.837347] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-REMOVE 2" on wlan0
<4>[   45.848614] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<4>[   45.866141] RTL871X: rtw_android_priv_cmd: Android private cmd "SETBAND 0" on wlan0
<4>[   45.874769] RTL871X: rtw_set_band(wlan0) band:0
<4>[   45.889097] RTL871X: cfg80211_rtw_scan(wlan0)
<4>[   45.894499] RTL871X: rtw_cfg80211_set_probe_req_wpsp2pie(wlan0) listen channel - country:XX, class:81, ch:6
<4>[   45.906702] RTL871X: [HW_VAR_CHECK_TXBUF] no packet in tx packet buffer (0)
<4>[   45.916649] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=21 seq=0 len=1
<4>[   45.924493] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=9 seq=1 len=7
<4>[   45.933925] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[   45.940886] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[   46.051187] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 2
<4>[   46.058134] RTL871X: ===>phy_SwChnl8703B: Channel = 2
<4>[   46.161160] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 3
<4>[   46.168070] RTL871X: ===>phy_SwChnl8703B: Channel = 3
<4>[   46.270987] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 4
<4>[   46.277887] RTL871X: ===>phy_SwChnl8703B: Channel = 4
<4>[   46.381377] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 5
<4>[   46.388196] RTL871X: ===>phy_SwChnl8703B: Channel = 5
<4>[   46.490925] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 6
<4>[   46.497816] RTL871X: ===>phy_SwChnl8703B: Channel = 6
<4>[   46.573789] RTL871X: cfg80211_rtw_change_station(p2p0)
<4>[   46.601496] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 7
<4>[   46.608271] RTL871X: ===>phy_SwChnl8703B: Channel = 7
<4>[   46.710978] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 8
<4>[   46.717736] RTL871X: ===>phy_SwChnl8703B: Channel = 8
<4>[   46.751528] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[   46.820958] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 9
<4>[   46.827707] RTL871X: ===>phy_SwChnl8703B: Channel = 9
<4>[   46.930942] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 10
<4>[   46.937758] RTL871X: ===>phy_SwChnl8703B: Channel = 10
<4>[   47.040951] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 11
<4>[   47.048052] RTL871X: ===>phy_SwChnl8703B: Channel = 11
<4>[   47.151557] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 12
<4>[   47.158570] RTL871X: ===>phy_SwChnl8703B: Channel = 12
<4>[   47.261191] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 13
<4>[   47.268017] RTL871X: ===>phy_SwChnl8703B: Channel = 13
<4>[   47.370932] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[   47.377671] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[   47.385736] RTL871X: survey done event(1e) band:0 for wlan0
<4>[   47.392089] RTL871X: rtw_indicate_scan_done(wlan0)
<4>[   47.397545] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=21 seq=2 len=1
<4>[   47.400085] RTL871X: IsBtDisabled=0, IsBtControlLps=0
<4>[   47.411079] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=9 seq=3 len=7
<4>[   47.420229] RTL871X: HwRateToMRate(): Non supported Rate [ff]!!!
<4>[   47.428770] RTL871X: ==>rtw_ps_processor .fw_state(8)
<4>[   47.435526] RTL871X: ==>ips_enter cnts:1
<4>[   47.439883] RTL871X: nolinked power save enter
<4>[   47.444864] RTL871X: ===> rtw_ips_pwr_down...................
<4>[   47.451339] RTL871X: ====> rtw_ips_dev_unload...
<4>[   47.466963] RTL871X: SetHwReg8703B: bMacPwrCtrlOn=0
<4>[   47.472998] RTL871X: <=== rtw_ips_pwr_down..................... in 30ms
<3>[   49.320258] meminfo2=10003
<6>[   49.788664] init: processing action 0x523f0 (property:sys.boot_completed=1)
<6>[   49.796902] init: computing context for service '/system/bin/busybox'
<5>[   49.805046] init: starting 'preinstall'
<6>[   49.812120] init: command 'start' r=0
<6>[   49.819616] init: processing action 0x56df8 (property:sys.boot_completed=1)
<6>[   49.828235] init: computing context for service '/system/bin/rild'
<5>[   49.836062] init: starting 'ril-daemon'
<6>[   49.841269] init: command 'start' r=0
<6>[   49.843671] init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001', group '1000'
<6>[   49.844200] init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'
<6>[   49.865605] init: command 'start' r=0
<6>[   51.348433] init: waitpid returned pid 797, status = 0000ff00
<5>[   51.355001] init: process 'preinstall', pid 797 exited
<6>[   52.156178] init: waitpid returned pid 248, status = 00000000
<5>[   52.162690] init: process 'bootanim', pid 248 exited
<6>[   57.596859] CPU Budget:update CPU 0 cpufreq max to 1200000 min to 120000
<4>[   57.604511] [dsm] store_scene: 0
<5>[   60.661520] CPU2: shutdown
<6>[   60.664603] [hotplug]: cpu(1) try to kill cpu(2)
<6>[   60.669777] [hotplug]: cpu2 is killed! .
<4>[   60.904223] RTL871X: cfg80211_rtw_scan(wlan0)
<4>[   60.909141] RTL871X: _rtw_pwr_wakeup call ips_leave....
<4>[   60.915061] RTL871X: ==>ips_leave cnts:1
<4>[   60.919413] RTL871X: ===>  rtw_ips_pwr_up..............
<4>[   60.925272] RTL871X: ===> ips_netdrv_open.........
<4>[   60.930682] RTL871X: FW does not exist before power on!!
<4>[   60.940076] RTL871X: SetHwReg8703B: bMacPwrCtrlOn=1
<4>[   60.945940] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
<4>[   60.953169] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
<4>[   60.961771] RTL871X: PowerOnCheck: 0x1B8 test Pass.
<4>[   60.967491] RTL871X: Power on ok!
<4>[   60.971417] RTL871X: rtl8703b_FirmwareDownload fw: FW_NIC, size: 20944
<4>[   60.978682] RTL871X: rtl8703b_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x3b2, Month=11, Date=26, Hour=17, Minute=21
<4>[   60.990787] RTL871X: rtl8703b_FirmwareDownload(): Shift for fw header!
<4>[   60.998054] RTL871X: rtl8703b_FirmwareDownload by IO write!
<4>[   61.124901] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050705
<4>[   61.134887] RTL871X: _8051Reset8703: Finish
<4>[   61.148708] RTL871X: _FWFreeToGo: Polling FW ready OK! (125, 10ms), REG_MCUFWDL:0x000507c6
<4>[   61.157920] RTL871X: rtl8703b_FirmwareDownload: DLFW OK !
<4>[   61.163950] RTL871X: rtl8703b_FirmwareDownload success. write_fw:1, 170ms
<4>[   61.171548] RTL871X:  <=== rtl8703b_FirmwareDownload()
<4>[   61.177260] RTL871X: HalDetectPwrDownMode(): PDN=0
<4>[   61.182593] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
<4>[   61.412516] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[   61.419238] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[   61.427019] RTL871X: pDM_Odm TxPowerTrackControl = 1
<4>[   61.432608] RTL871X: pDM_Odm TxPowerTrackControl = 1
<4>[   60.670902] CPU2: Booted secondary processor
<4>[   61.699080] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[   61.706404] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[   61.715213] RTL871X: #### hw_var_set_opmode() -5398 iface_type(0) mode = 2 ####
<4>[   61.723630] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:0
<4>[   61.733885] RTL871X: kfree gain_offset 0x55:0x8206e RTL871X:  after :0x206e
<4>[   61.742826] RTL871X: <===  rtw_ips_pwr_up.............. in 830ms
<4>[   61.749535] RTL871X: nolinked power save leave
<4>[   61.754613] RTL871X: ==> ips_leave.....LED(0x00e28282)...
<4>[   61.763953] RTL871X: [HW_VAR_CHECK_TXBUF] no packet in tx packet buffer (0)
<4>[   61.764559] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=21 seq=0 len=1
<4>[   61.764995] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=9 seq=1 len=7
<4>[   61.788537] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=21 seq=2 len=1
<4>[   61.796246] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=9 seq=3 len=7
<4>[   61.805313] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[   61.812374] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[   61.911173] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 2
<4>[   61.918110] RTL871X: ===>phy_SwChnl8703B: Channel = 2
<4>[   62.021375] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 3
<4>[   62.028338] RTL871X: ===>phy_SwChnl8703B: Channel = 3
<4>[   62.131204] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 4
<4>[   62.138107] RTL871X: ===>phy_SwChnl8703B: Channel = 4
<4>[   62.241611] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 5
<4>[   62.248482] RTL871X: ===>phy_SwChnl8703B: Channel = 5
<4>[   62.351142] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 6
<4>[   62.358135] RTL871X: ===>phy_SwChnl8703B: Channel = 6
<4>[   62.460955] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 7
<4>[   62.467673] RTL871X: ===>phy_SwChnl8703B: Channel = 7
<4>[   62.570937] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 8
<4>[   62.577671] RTL871X: ===>phy_SwChnl8703B: Channel = 8
<4>[   62.680947] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 9
<4>[   62.687661] RTL871X: ===>phy_SwChnl8703B: Channel = 9
<5>[   62.694673] CPU1: shutdown
<6>[   62.697704] [hotplug]: cpu(3) try to kill cpu(1)
<6>[   62.703009] [hotplug]: cpu1 is killed! .
<4>[   62.791224] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 10
<4>[   62.798065] RTL871X: ===>phy_SwChnl8703B: Channel = 10
<4>[   62.901289] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 11
<4>[   62.908299] RTL871X: ===>phy_SwChnl8703B: Channel = 11
<4>[   63.011404] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 12
<4>[   63.018331] RTL871X: ===>phy_SwChnl8703B: Channel = 12
<4>[   63.120999] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 13
<4>[   63.127815] RTL871X: ===>phy_SwChnl8703B: Channel = 13
<4>[   63.230887] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[   63.237602] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[   63.245713] RTL871X: survey done event(1c) band:0 for wlan0
<4>[   63.252118] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=21 seq=4 len=1
<4>[   63.252318] RTL871X: rtw_indicate_scan_done(wlan0)
<4>[   63.260118] RTL871X: IsBtDisabled=0, IsBtControlLps=0
<4>[   63.270803] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=9 seq=5 len=7
<4>[   63.279576] RTL871X: HwRateToMRate(): Non supported Rate [ff]!!!
<4>[   63.289086] RTL871X: ==>rtw_ps_processor .fw_state(8)
<4>[   63.295474] RTL871X: ==>ips_enter cnts:2
<4>[   63.299843] RTL871X: nolinked power save enter
<4>[   63.304821] RTL871X: ===> rtw_ips_pwr_down...................
<4>[   63.311224] RTL871X: ====> rtw_ips_dev_unload...
<4>[   63.326154] RTL871X: SetHwReg8703B: bMacPwrCtrlOn=0
<4>[   63.332575] RTL871X: <=== rtw_ips_pwr_down..................... in 30ms
<5>[   65.231522] CPU3: shutdown
<6>[   65.234532] [hotplug]: cpu(2) try to kill cpu(3)
<6>[   65.239699] [hotplug]: cpu3 is killed! .
<4>[   62.704110] CPU1: Booted secondary processor
<5>[   69.248722] CPU2: shutdown
<6>[   69.252360] [hotplug]: cpu(0) try to kill cpu(2)
<6>[   69.257822] [hotplug]: cpu2 is killed! .
<5>[   70.742043] CPU1: shutdown
<6>[   70.745158] [hotplug]: cpu(0) try to kill cpu(1)
<6>[   70.750828] [hotplug]: cpu1 is killed! .
<6>[   75.224830] healthd: battery l=58 v=3818 t=30.0 h=2 st=2 c=13 chg=u
<4>[   75.943834] RTL871X: cfg80211_rtw_scan(wlan0)
<4>[   75.948927] RTL871X: _rtw_pwr_wakeup call ips_leave....
<4>[   75.960391] RTL871X: ==>ips_leave cnts:2
<4>[   75.964772] RTL871X: ===>  rtw_ips_pwr_up..............
<4>[   75.972315] RTL871X: ===> ips_netdrv_open.........
<4>[   75.977931] RTL871X: FW does not exist before power on!!
<4>[   75.988429] RTL871X: SetHwReg8703B: bMacPwrCtrlOn=1
<4>[   75.996946] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
<4>[   76.004322] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
<4>[   76.012996] RTL871X: PowerOnCheck: 0x1B8 test Pass.
<4>[   76.019099] RTL871X: Power on ok!
<4>[   76.023324] RTL871X: rtl8703b_FirmwareDownload fw: FW_NIC, size: 20944
<4>[   76.030637] RTL871X: rtl8703b_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x3b2, Month=11, Date=26, Hour=17, Minute=21
<4>[   76.042872] RTL871X: rtl8703b_FirmwareDownload(): Shift for fw header!
<4>[   76.050152] RTL871X: rtl8703b_FirmwareDownload by IO write!
<4>[   76.243652] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050705
<4>[   76.253799] RTL871X: _8051Reset8703: Finish
<4>[   76.267656] RTL871X: _FWFreeToGo: Polling FW ready OK! (106, 10ms), REG_MCUFWDL:0x000507c6
<4>[   76.276998] RTL871X: rtl8703b_FirmwareDownload: DLFW OK !
<4>[   76.283045] RTL871X: rtl8703b_FirmwareDownload success. write_fw:1, 230ms
<4>[   76.291884] RTL871X:  <=== rtl8703b_FirmwareDownload()
<4>[   76.297607] RTL871X: HalDetectPwrDownMode(): PDN=0
<4>[   76.303031] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
<4>[   76.535011] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[   76.541926] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[   76.549725] RTL871X: pDM_Odm TxPowerTrackControl = 1
<4>[   76.555406] RTL871X: pDM_Odm TxPowerTrackControl = 1
<4>[   76.853069] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[   76.863003] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[   76.871186] RTL871X: #### hw_var_set_opmode() -5398 iface_type(0) mode = 2 ####
<4>[   76.879650] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:0
<4>[   76.890115] RTL871X: kfree gain_offset 0x55:0x8206e RTL871X:  after :0x206e
<4>[   76.899661] RTL871X: <===  rtw_ips_pwr_up.............. in 930ms
<4>[   76.906509] RTL871X: nolinked power save leave
<4>[   76.912945] RTL871X: ==> ips_leave.....LED(0x00e28282)...
<4>[   76.923776] RTL871X: [HW_VAR_CHECK_TXBUF] no packet in tx packet buffer (0)
<4>[   76.931779] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=21 seq=0 len=1
<4>[   76.939415] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=9 seq=1 len=7
<4>[   76.949130] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=21 seq=2 len=1
<4>[   76.956821] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=9 seq=3 len=7
<4>[   76.969193] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[   76.976141] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[   77.081274] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 2
<4>[   77.088181] RTL871X: ===>phy_SwChnl8703B: Channel = 2
<4>[   77.191037] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 3
<4>[   77.197968] RTL871X: ===>phy_SwChnl8703B: Channel = 3
<4>[   77.301906] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 4
<4>[   77.309163] RTL871X: ===>phy_SwChnl8703B: Channel = 4
<4>[   77.411557] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 5
<4>[   77.418851] RTL871X: ===>phy_SwChnl8703B: Channel = 5
<4>[   77.523410] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 6
<4>[   77.531901] RTL871X: ===>phy_SwChnl8703B: Channel = 6
<4>[   77.642665] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 7
<4>[   77.653998] RTL871X: ===>phy_SwChnl8703B: Channel = 7
<4>[   77.762332] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 8
<4>[   77.774153] RTL871X: ===>phy_SwChnl8703B: Channel = 8
<4>[   77.891874] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 9
<4>[   77.903405] RTL871X: ===>phy_SwChnl8703B: Channel = 9
<4>[   78.011917] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 10
<4>[   78.023220] RTL871X: ===>phy_SwChnl8703B: Channel = 10
<6>[   78.103610] request_suspend_state: sleep (0->3) at 78103573539 (1970-04-25 03:32:11.311334244 UTC)
<4>[   78.114066] RTL871X: rtw_early_suspend
<5>[   78.121047] [VFE]vfe early suspend
<4>[   78.131495] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 11
<5>[   78.138462] [VFE]vfe power off in early suspend
<4>[   78.145908] ###########close all layers 0
<4>[   78.152474] RTL871X: ===>phy_SwChnl8703B: Channel = 11
<5>[   78.160487] [VFE]vfe_suspend_helper
<5>[   78.164409] [VFE]Set camera to standy off and power off !
<7>[   78.181182] [VFE_DEBUG]ccm_cfg pt = edcb04fc
<7>[   78.185974] [VFE_DEBUG]ccm_cfg->sd = ee990180
<7>[   78.203469] [VFE_DEBUG]module vflip = 0 hflip = 0
<7>[   78.216611] [VFE_DEBUG]module vflip_thumb = 0 hflip_thumb = 0
<6>[   78.227044] CPU Budget:update CPU 0 cpufreq max to 1200000 min to 120000
<7>[   78.239576] [VFE_DEBUG]module is_isp_used = 0 is_bayer_raw= 0
<4>[   78.246425] [dsm] store_scene: 0
<5>[   78.277991] [VFE]mclk on
<4>[   78.282296] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 12
<4>[   78.291384] ###########close all layers 0
<4>[   78.298844] RTL871X: ===>phy_SwChnl8703B: Channel = 12
<4>[   78.304821] [CSI][GC2035]enable oe!
<7>[   78.308792] [VFE_DEBUG]sensor standby off ok at device number 0 when vfe_suspend!
<7>[   78.353907] [VFE_DEBUG]os_gpio_write, hdl is NULL
<7>[   78.359191] [VFE_DEBUG]set regulator dvdd = 1800000,return 0
<7>[   78.374400] [VFE_DEBUG]set regulator avdd = 2800000,return 0
<7>[   78.387336] [VFE_DEBUG]set regulator iovdd = 2800000,return 0
<7>[   78.400199] [VFE_DEBUG]iovdd_on_off_cnt = 3! return
<5>[   78.419185] [VFE]mclk off
<4>[   78.423331] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 13
<4>[   78.433816] RTL871X: ===>phy_SwChnl8703B: Channel = 13
<7>[   78.440466] [VFE_DEBUG]set regulator iovdd = 2800000,return 0
<7>[   78.449863] [VFE_DEBUG]iovdd_on_off_cnt = 2! return
<7>[   78.459990] [VFE_DEBUG]power_off______________________________
<7>[   78.474341] [VFE_DEBUG]sensor power off ok at device number 0 when vfe_suspend!
<7>[   78.491811] [VFE_DEBUG]ccm_cfg pt = edcb07c8
<7>[   78.500500] [VFE_DEBUG]ccm_cfg->sd = ede1ee80
<7>[   78.512332] [VFE_DEBUG]module vflip = 0 hflip = 0
<3>[   78.518866] stk8baxx_get_file_content: filp_open error, no offset file!
<7>[   78.526476] [VFE_DEBUG]module vflip_thumb = 0 hflip_thumb = 0
<7>[   78.532951] [VFE_DEBUG]module is_isp_used = 0 is_bayer_raw= 0
<5>[   78.539343] [VFE]mclk on
<3>[   78.546589] stk8baxx_store_in_file: filp_open error!
<4>[   78.553351] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[   78.563250] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[   78.577036] RTL871X: survey done event(1c) band:0 for wlan0
<4>[   78.583473] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=21 seq=4 len=1
<4>[   78.591255] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=9 seq=5 len=7
<7>[   78.598697] [VFE_DEBUG]sensor standby off ok at device number 1 when vfe_suspend!
<6>[   78.607091] STK8BAXX_LoadCali: cali_status=0xff
<4>[   78.614740] RTL871X: rtw_indicate_scan_done(wlan0)
<7>[   78.624698] [VFE_DEBUG]os_gpio_write, hdl is NULL
<4>[   78.640114] RTL871X: IsBtDisabled=1, IsBtControlLps=0
<7>[   78.645980] [VFE_DEBUG]os_gpio_write, hdl is NULL
<4>[   78.652881] RTL871X: HwRateToMRate(): Non supported Rate [ff]!!!
<7>[   78.659710] [VFE_DEBUG]set regulator dvdd = 1800000,return 0
<4>[   78.671765] RTL871X: ==>rtw_ps_processor .fw_state(8)
<4>[   78.677576] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=21 seq=6 len=1
<4>[   78.685182] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=9 seq=7 len=7
<7>[   78.700196] [VFE_DEBUG]set regulator avdd = 2800000,return 0
<4>[   78.707708] RTL871X: ==>ips_enter cnts:3
<4>[   78.713108] RTL871X: nolinked power save enter
<7>[   78.718216] [VFE_DEBUG]set regulator iovdd = 2800000,return 0
<6>[   78.729904] STK8BAXX_SetEnable:0
<4>[   78.733845] RTL871X: ===> rtw_ips_pwr_down...................
<7>[   78.740498] [VFE_DEBUG]iovdd_on_off_cnt = 1! return
<4>[   78.750430] RTL871X: ====> rtw_ips_dev_unload...
<5>[   78.755734] [VFE]mclk off
<4>[   78.770088] [VFE_WARN]os_gpio_set_status, hdl is NULL
<4>[   70.751257] CPU1: Booted secondary processor
<7>[   78.787773] [VFE_DEBUG]set regulator iovdd = 2800000,return 0
<7>[   78.787842] [VFE_DEBUG]iovdd_on_off_cnt = 0! return
<7>[   78.787951] [VFE_DEBUG]power_off______________________________
<7>[   78.787960] [VFE_DEBUG]sensor power off ok at device number 1 when vfe_suspend!
<4>[   78.787969] [VFE_WARN]vfe vpu clock is null
<5>[   78.787974] [VFE]vfe_suspend done!
<4>[   78.788928] RTL871X: SetHwReg8703B: bMacPwrCtrlOn=0
<4>[   78.789437] RTL871X: <=== rtw_ips_pwr_down..................... in 50ms
<6>[   78.811714] CPU Budget:update CPU 0 cpufreq max to 1200000 min to 120000
<6>[   78.820154] Mali early suspend begin
<6>[   78.820476] Mali early suspend end
<6>[   78.820485] backlight_early_suspend
<6>[   78.820633] [LCD]close, step 0 delay 0 finish
<4>[   78.859966] [dsm] store_scene: 0
<4>[   78.872512] RTL871X: rtw_android_priv_cmd: Android private cmd "SETSUSPENDMODE 1" on wlan0
<4>[   78.886998] RTL871X: Unknown PRIVATE command SETSUSPENDMODE 1 - ignored
<6>[   78.894515] [LCD]close, step 1 delay 0 finish
<6>[   78.970154] [LCD]close, step 2 delay 20 finish
<4>[   79.000277] axp pconf set pin [GPIO2] data to [0]
<6>[   79.005527] [LCD]close, step 3 delay 50 finish
<6>[   79.080111] backlight_early_suspend finish
<6>[   80.712390] healthd: battery l=58 v=3874 t=30.0 h=2 st=2 c=325 chg=u
<5>[   80.767556] CPU1: shutdown
<6>[   80.771325] [hotplug]: cpu(0) try to kill cpu(1)
<6>[   80.776659] [hotplug]: cpu1 is killed! .
<4>[   90.934787] RTL871X: cfg80211_rtw_scan(wlan0)
<4>[   90.939844] RTL871X: _rtw_pwr_wakeup call ips_leave....
<4>[   90.956605] RTL871X: ==>ips_leave cnts:3
<4>[   90.961333] RTL871X: ===>  rtw_ips_pwr_up..............
<4>[   90.967368] RTL871X: ===> ips_netdrv_open.........
<4>[   90.976204] RTL871X: FW does not exist before power on!!
<4>[   90.986279] RTL871X: SetHwReg8703B: bMacPwrCtrlOn=1
<4>[   90.992438] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
<4>[   90.999652] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
<4>[   91.008358] RTL871X: PowerOnCheck: 0x1B8 test Pass.
<4>[   91.014325] RTL871X: Power on ok!
<4>[   91.018333] RTL871X: rtl8703b_FirmwareDownload fw: FW_NIC, size: 20944
<4>[   91.027878] RTL871X: rtl8703b_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x3b2, Month=11, Date=26, Hour=17, Minute=21
<4>[   91.039994] RTL871X: rtl8703b_FirmwareDownload(): Shift for fw header!
<4>[   91.047503] RTL871X: rtl8703b_FirmwareDownload by IO write!
<4>[   91.232134] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050705
<4>[   91.242151] RTL871X: _8051Reset8703: Finish
<4>[   91.256012] RTL871X: _FWFreeToGo: Polling FW ready OK! (101, 10ms), REG_MCUFWDL:0x000507c6
<4>[   91.265212] RTL871X: rtl8703b_FirmwareDownload: DLFW OK !
<4>[   91.273437] RTL871X: rtl8703b_FirmwareDownload success. write_fw:1, 230ms
<4>[   91.281012] RTL871X:  <=== rtl8703b_FirmwareDownload()
<4>[   91.286713] RTL871X: HalDetectPwrDownMode(): PDN=0
<4>[   91.292054] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
<4>[   91.520926] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[   91.527614] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[   91.535169] RTL871X: pDM_Odm TxPowerTrackControl = 1
<4>[   91.540715] RTL871X: pDM_Odm TxPowerTrackControl = 1
<4>[   91.824692] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[   91.831572] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[   91.839704] RTL871X: #### hw_var_set_opmode() -5398 iface_type(0) mode = 2 ####
<4>[   91.848106] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:0
<4>[   91.860641] RTL871X: kfree gain_offset 0x55:0x8206e RTL871X:  after :0x206e
<4>[   91.869489] RTL871X: <===  rtw_ips_pwr_up.............. in 900ms
<4>[   91.876184] RTL871X: nolinked power save leave
<4>[   91.881276] RTL871X: ==> ips_leave.....LED(0x00e28282)...
<4>[   91.892091] RTL871X: [HW_VAR_CHECK_TXBUF] no packet in tx packet buffer (0)
<4>[   91.900099] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=21 seq=0 len=1
<4>[   91.907755] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=9 seq=1 len=7
<4>[   91.916899] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=21 seq=2 len=1
<4>[   91.924584] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=9 seq=3 len=7
<4>[   91.934878] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[   91.941709] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[   92.049013] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 2
<4>[   92.055830] RTL871X: ===>phy_SwChnl8703B: Channel = 2
<4>[   92.165830] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 3
<4>[   92.173447] RTL871X: ===>phy_SwChnl8703B: Channel = 3
<4>[   92.283673] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 4
<4>[   92.291296] RTL871X: ===>phy_SwChnl8703B: Channel = 4
<4>[   92.403631] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 5
<4>[   92.411332] RTL871X: ===>phy_SwChnl8703B: Channel = 5
<4>[   92.523603] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 6
<4>[   92.532739] RTL871X: ===>phy_SwChnl8703B: Channel = 6
<4>[   92.643755] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 7
<4>[   92.651374] RTL871X: ===>phy_SwChnl8703B: Channel = 7
<4>[   92.764055] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 8
<4>[   92.772288] RTL871X: ===>phy_SwChnl8703B: Channel = 8
<4>[   92.883794] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 9
<4>[   92.891419] RTL871X: ===>phy_SwChnl8703B: Channel = 9
<4>[   93.003742] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 10
<4>[   93.011528] RTL871X: ===>phy_SwChnl8703B: Channel = 10
<4>[   93.123872] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 11
<4>[   93.131561] RTL871X: ===>phy_SwChnl8703B: Channel = 11
<4>[   93.243661] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 12
<4>[   93.251377] RTL871X: ===>phy_SwChnl8703B: Channel = 12
<4>[   93.363928] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 13
<4>[   93.372734] RTL871X: ===>phy_SwChnl8703B: Channel = 13
<4>[   93.483746] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[   93.491381] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[   93.509696] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=21 seq=4 len=1
<4>[   93.518259] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=9 seq=5 len=7
<4>[   93.529095] RTL871X: survey done event(21) band:0 for wlan0
<4>[   93.543527] RTL871X: rtw_indicate_scan_done(wlan0)
<4>[   93.570115] RTL871X: IsBtDisabled=1, IsBtControlLps=0
<4>[   93.578150] RTL871X: HwRateToMRate(): Non supported Rate [ff]!!!
<4>[   93.589834] RTL871X: ==>rtw_ps_processor .fw_state(8)
<4>[   93.601235] RTL871X: ==>ips_enter cnts:4
<4>[   93.605603] RTL871X: nolinked power save enter
<4>[   93.612802] RTL871X: ===> rtw_ips_pwr_down...................
<4>[   93.619186] RTL871X: ====> rtw_ips_dev_unload...
<4>[   93.635752] RTL871X: SetHwReg8703B: bMacPwrCtrlOn=0
<4>[   93.641960] RTL871X: <=== rtw_ips_pwr_down..................... in 30ms
<4>[   80.770132] CPU1: Booted secondary processor
<5>[   97.278714] CPU1: shutdown
<6>[   97.282324] [hotplug]: cpu(0) try to kill cpu(1)
<6>[   97.287654] [hotplug]: cpu1 is killed! .
<4>[  105.963421] RTL871X: cfg80211_rtw_scan(wlan0)
<4>[  105.968485] RTL871X: _rtw_pwr_wakeup call ips_leave....
<4>[  105.984838] RTL871X: ==>ips_leave cnts:4
<4>[  105.989349] RTL871X: ===>  rtw_ips_pwr_up..............
<4>[  105.998540] RTL871X: ===> ips_netdrv_open.........
<4>[  106.004162] RTL871X: FW does not exist before power on!!
<4>[  106.014295] RTL871X: SetHwReg8703B: bMacPwrCtrlOn=1
<4>[  106.020424] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
<4>[  106.027639] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
<4>[  106.036360] RTL871X: PowerOnCheck: 0x1B8 test Pass.
<4>[  106.042381] RTL871X: Power on ok!
<4>[  106.046386] RTL871X: rtl8703b_FirmwareDownload fw: FW_NIC, size: 20944
<4>[  106.053757] RTL871X: rtl8703b_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x3b2, Month=11, Date=26, Hour=17, Minute=21
<4>[  106.065954] RTL871X: rtl8703b_FirmwareDownload(): Shift for fw header!
<4>[  106.073370] RTL871X: rtl8703b_FirmwareDownload by IO write!
<4>[  106.264376] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050705
<4>[  106.274504] RTL871X: _8051Reset8703: Finish
<4>[  106.288373] RTL871X: _FWFreeToGo: Polling FW ready OK! (102, 10ms), REG_MCUFWDL:0x000507c6
<4>[  106.299742] RTL871X: rtl8703b_FirmwareDownload: DLFW OK !
<4>[  106.305748] RTL871X: rtl8703b_FirmwareDownload success. write_fw:1, 230ms
<4>[  106.313332] RTL871X:  <=== rtl8703b_FirmwareDownload()
<4>[  106.319032] RTL871X: HalDetectPwrDownMode(): PDN=0
<4>[  106.324360] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
<4>[  106.553859] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[  106.560563] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[  106.568084] RTL871X: pDM_Odm TxPowerTrackControl = 1
<4>[  106.573684] RTL871X: pDM_Odm TxPowerTrackControl = 1
<4>[  106.864600] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[  106.871718] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[  106.880003] RTL871X: #### hw_var_set_opmode() -5398 iface_type(0) mode = 2 ####
<4>[  106.888479] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:0
<4>[  106.900923] RTL871X: kfree gain_offset 0x55:0x8206e RTL871X:  after :0x206e
<4>[  106.909773] RTL871X: <===  rtw_ips_pwr_up.............. in 920ms
<4>[  106.916468] RTL871X: nolinked power save leave
<4>[  106.921559] RTL871X: ==> ips_leave.....LED(0x00e28282)...
<4>[  106.932365] RTL871X: [HW_VAR_CHECK_TXBUF] no packet in tx packet buffer (0)
<4>[  106.940373] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=21 seq=0 len=1
<4>[  106.948019] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=9 seq=1 len=7
<4>[  106.957205] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=21 seq=2 len=1
<4>[  106.964890] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=9 seq=3 len=7
<4>[  106.975178] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[  106.982002] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[  107.081066] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 2
<4>[  107.087817] RTL871X: ===>phy_SwChnl8703B: Channel = 2
<4>[  107.191071] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 3
<4>[  107.197820] RTL871X: ===>phy_SwChnl8703B: Channel = 3
<4>[  107.302078] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 4
<4>[  107.309207] RTL871X: ===>phy_SwChnl8703B: Channel = 4
<4>[  107.412041] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 5
<4>[  107.419159] RTL871X: ===>phy_SwChnl8703B: Channel = 5
<4>[  107.533519] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 6
<4>[  107.541103] RTL871X: ===>phy_SwChnl8703B: Channel = 6
<4>[  107.651258] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 7
<4>[  107.658187] RTL871X: ===>phy_SwChnl8703B: Channel = 7
<4>[  107.761258] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 8
<4>[  107.768101] RTL871X: ===>phy_SwChnl8703B: Channel = 8
<4>[  107.874798] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 9
<4>[  107.882422] RTL871X: ===>phy_SwChnl8703B: Channel = 9
<4>[  107.993728] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 10
<4>[  108.001480] RTL871X: ===>phy_SwChnl8703B: Channel = 10
<4>[  108.113648] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 11
<4>[  108.121408] RTL871X: ===>phy_SwChnl8703B: Channel = 11
<4>[  108.233713] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 12
<4>[  108.241441] RTL871X: ===>phy_SwChnl8703B: Channel = 12
<4>[  108.353769] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 13
<4>[  108.361442] RTL871X: ===>phy_SwChnl8703B: Channel = 13
<4>[  108.473984] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[  108.482708] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[  108.500923] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=21 seq=4 len=1
<4>[  108.509245] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=9 seq=5 len=7
<4>[  108.521530] RTL871X: survey done event(24) band:0 for wlan0
<4>[  108.529985] RTL871X: rtw_indicate_scan_done(wlan0)
<4>[  108.550159] RTL871X: IsBtDisabled=1, IsBtControlLps=0
<4>[  108.558219] RTL871X: HwRateToMRate(): Non supported Rate [ff]!!!
<4>[  108.570854] RTL871X: ==>rtw_ps_processor .fw_state(8)
<4>[  108.579779] RTL871X: ==>ips_enter cnts:5
<4>[  108.584228] RTL871X: nolinked power save enter
<4>[  108.589202] RTL871X: ===> rtw_ips_pwr_down...................
<4>[  108.595777] RTL871X: ====> rtw_ips_dev_unload...
<4>[  108.612910] RTL871X: SetHwReg8703B: bMacPwrCtrlOn=0
<4>[  108.619200] RTL871X: <=== rtw_ips_pwr_down..................... in 30ms

fel mode


lsusb

Bus 001 Device 056: ID 1f3a:efe8 Onda (unverified) V972 tablet in flashing mode


sunxi-fel version

AWUSBFEX soc=00001667(A33) 00000001 ver=0001 44 08 scratchpad=00007e00 00000000 00000000

Dump Firmware mit FELix


sunxi-fel version

AWUSBFEX soc=00001667(A33) 00000001 ver=0001 44 08 scratchpad=00007e00 00000000 00000000

als Anleitung diente https://linux-sunxi.org/Intenso_TAB744#Dump_firmware_from_NAND

sunxi-fel write 0x2000 fes1.fex

sunxi-fel exe 0x2000

sunxi-fel read 0x43000000 0x10000 tab_script.bin

sunxi-fel read 0x49000000 0xb8000 tab_u-boot.bin

sunxi-fel write 0x4a000000 u-boot.fex

sunxi-fel fill 0x4a0000e0 1 0x10

sunxi-fel exe 0x4a000000

cd ~/workspace/

git clone https://github.com/lolet/FELix.git

FELix deps: hex-string hexdump colorize libusb bindata crc32 rc6 inifile ⇒ gem install …

cd FELix/

ruby felix --nand on

FELix 1.0 RC5 by Lolet
Warning: I don't give any warranty on this software. You use it at own risk!
────────────────────────────────────
* Connecting to device at port 1, FEL device 8@35 1f3a:efe8	[OK]
* Setting flash state to on                              	[OK]
* Cleaning up                                            	[OK]

ruby felix --mbr-dump

FELix 1.0 RC5 by Lolet
Warning: I don't give any warranty on this software. You use it at own risk!
────────────────────────────────────
* Connecting to device at port 1, FEL device 8@35 1f3a:efe8	[OK]
* Reading MBR                                            	[OK]
crc                       0xd47303ff
version                   0x00000200
magic                     softw411
copy                      4
mbr_index                 0
part_count                13
stamp                     0
Partitions:
bootloader                (nanda) @ 0x00008000 [   32 MB] [0x00000000]
env                       (nandb) @ 0x00018000 [   16 MB] [0x00000000]
boot                      (nandc) @ 0x00020000 [   16 MB] [0x00000000]
system                    (nandd) @ 0x00028000 [  768 MB] [0x00000000]
data                      (nande) @ 0x001a8000 [ 1024 MB] [0x00000000]
misc                      (nandf) @ 0x003a8000 [   16 MB] [0x00000000]
recovery                  (nandg) @ 0x003b0000 [   32 MB] [0x00000000]
cache                     (nandh) @ 0x003c0000 [  128 MB] [0x00000000]
metadata                  (nandi) @ 0x00400000 [   16 MB] [0x00000000]
private                   (nandj) @ 0x00408000 [   16 MB] [0x00000000]
klog                      (nandk) @ 0x00410000 [   16 MB] [0x00000000]
alog                      (nandl) @ 0x00418000 [   64 MB] [0x00000000]
UDISK                     (nandm) @ 0x00438000 [    0 MB] [0x00000000]
lockflag                  0
* Cleaning up                                            	[OK]

ruby felix -c fes --read tab_mbr.bin -a 0x0 -l $((0x8000*0x200))

FELix 1.0 RC5 by Lolet
Warning: I don't give any warranty on this software. You use it at own risk!
────────────────────────────────────
* Connecting to device at port 1, FEL device 8@35 1f3a:efe8	[OK]
* fes: Reading data (16777216/16777216 bytes)            	[OK]
* Cleaning up                                            	[OK]

dd if=tab_mbr.bin of=tab_sunxi_mbr.fex count=$((0x80))

128+0 records in
128+0 records out
65536 bytes (66 kB, 64 KiB) copied, 0,000531384 s, 123 MB/s

for part in bootloader env boot system data misc recovery cache metadata private
do ruby felix -c fes --read tab_$part.bin -t none -i $part ; sleep 2
done

FELix 1.0 RC5 by Lolet
Warning: I don't give any warranty on this software. You use it at own risk!
────────────────────────────────────
* Connecting to device at port 1, FEL device 8@35 1f3a:efe8	[OK]
* Reading MBR                                            	[OK]
* fes: Reading data (33554432/33554432 bytes)            	[OK]
* Cleaning up                                            	[OK]
FELix 1.0 RC5 by Lolet
Warning: I don't give any warranty on this software. You use it at own risk!
────────────────────────────────────
* Connecting to device at port 1, FEL device 8@35 1f3a:efe8	[OK]
* Reading MBR                                            	[OK]
* fes: Reading data (16777216/16777216 bytes)            	[OK]
* Cleaning up                                            	[OK]
FELix 1.0 RC5 by Lolet
Warning: I don't give any warranty on this software. You use it at own risk!
────────────────────────────────────
* Connecting to device at port 1, FEL device 8@35 1f3a:efe8	[OK]
* Reading MBR                                            	[OK]
* fes: Reading data (16777216/16777216 bytes)            	[OK]
* Cleaning up                                            	[OK]
FELix 1.0 RC5 by Lolet
Warning: I don't give any warranty on this software. You use it at own risk!
────────────────────────────────────
* Connecting to device at port 1, FEL device 8@35 1f3a:efe8	[OK]
* Reading MBR                                            	[OK]
* fes: Reading data (805306368/805306368 bytes)          	[OK]
* Cleaning up                                            	[OK]
FELix 1.0 RC5 by Lolet
Warning: I don't give any warranty on this software. You use it at own risk!
────────────────────────────────────
* Connecting to device at port 1, FEL device 8@35 1f3a:efe8	[OK]
* Reading MBR                                            	[OK]
* fes: Reading data (1073741824/1073741824 bytes)        	[OK]
* Cleaning up                                            	[OK]
FELix 1.0 RC5 by Lolet
Warning: I don't give any warranty on this software. You use it at own risk!
────────────────────────────────────
* Connecting to device at port 1, FEL device 8@35 1f3a:efe8	[OK]
* Reading MBR                                            	[OK]
* fes: Reading data (16777216/16777216 bytes)            	[OK]
* Cleaning up                                            	[OK]
FELix 1.0 RC5 by Lolet
Warning: I don't give any warranty on this software. You use it at own risk!
────────────────────────────────────
* Connecting to device at port 1, FEL device 8@35 1f3a:efe8	[OK]
* Reading MBR                                            	[OK]
* fes: Reading data (33554432/33554432 bytes)            	[OK]
* Cleaning up                                            	[OK]
FELix 1.0 RC5 by Lolet
Warning: I don't give any warranty on this software. You use it at own risk!
────────────────────────────────────
* Connecting to device at port 1, FEL device 8@35 1f3a:efe8	[OK]
* Reading MBR                                            	[OK]
* fes: Reading data (134217728/134217728 bytes)          	[OK]
* Cleaning up                                            	[OK]
FELix 1.0 RC5 by Lolet
Warning: I don't give any warranty on this software. You use it at own risk!
────────────────────────────────────
* Connecting to device at port 1, FEL device 8@35 1f3a:efe8	[OK]
* Reading MBR                                            	[OK]
* fes: Reading data (16777216/16777216 bytes)            	[OK]
* Cleaning up                                            	[OK]
FELix 1.0 RC5 by Lolet
Warning: I don't give any warranty on this software. You use it at own risk!
────────────────────────────────────
* Connecting to device at port 1, FEL device 8@35 1f3a:efe8	[OK]
* Reading MBR                                            	[OK]
* fes: Reading data (16777216/16777216 bytes)            	[OK]
* Cleaning up                                            	[OK]
-rw-r--r--  1 michael michael  16M  9. Apr 01:19 tab_boot.bin
-rw-r--r--  1 michael michael  32M  9. Apr 01:18 tab_bootloader.bin
-rw-r--r--  1 michael michael 128M  9. Apr 01:25 tab_cache.bin
-rw-r--r--  1 michael michael 1,0G  9. Apr 01:24 tab_data.bin
-rw-r--r--  1 michael michael  16M  9. Apr 01:19 tab_env.bin
-rw-r--r--  1 michael michael  16M  9. Apr 01:18 tab_mbr.bin
-rw-r--r--  1 michael michael  16M  9. Apr 01:25 tab_metadata.bin
-rw-r--r--  1 michael michael  16M  9. Apr 01:24 tab_misc.bin
-rw-r--r--  1 michael michael  16M  9. Apr 01:25 tab_private.bin
-rw-r--r--  1 michael michael  32M  9. Apr 01:24 tab_recovery.bin
-rw-r--r--  1 michael michael  64K  9. Apr 01:18 tab_sunxi_mbr.fex
-rw-r--r--  1 michael michael 768M  9. Apr 01:21 tab_system.bin

file tab_*

tab_boot.bin:       Android bootimg, kernel (0x40008000), ramdisk (0x41000000), page size: 2048
tab_bootloader.bin: , code offset 0x0+3, OEM-ID "        ", sectors/cluster 4, root entries 512, Media descriptor 0xf8, sectors/FAT 256, sectors/track 0, sectors 262144 (volumes > 32 MB) , dos < 4.0 BootSector (0x0), FAT (16 bit)
tab_cache.bin:      Linux rev 1.0 ext4 filesystem data, UUID=57f8f4bc-abf4-655f-bf67-946fc0f9f25b (extents) (large files)
tab_data.bin:       Linux rev 1.0 ext4 filesystem data, UUID=57f8f4bc-abf4-655f-bf67-946fc0f9f25b (extents) (large files)
tab_env.bin:        data
tab_mbr.bin:        data
tab_metadata.bin:   data
tab_misc.bin:       data
tab_private.bin:    DOS/MBR boot sector, code offset 0x58+2, OEM-ID "android ", sectors/cluster 8, sectors 32768 (volumes <=32 MB) , sectors/track 16, heads 4, FAT (32 bit), sectors/FAT 32, serial number 0x1a1707b2, label: "PRIVATE    "
tab_recovery.bin:   Android bootimg, kernel (0x40008000), ramdisk (0x41000000), page size: 2048
tab_sunxi_mbr.fex:  data
tab_system.bin:     Linux rev 1.0 ext4 filesystem data, UUID=57f8f4bc-abf4-655f-bf67-946fc0f9f25b (extents) (large files)




UART

HELLO! BOOT0 is starting!
boot0 version : 3.1.0
reg_addr 0x01f00100 =0x00000000
reg_addr 0x01f00104 =0x00000000
reg_addr 0x01f00108 =0x00000000
reg_addr 0x01f0010c =0x00000000
reg_addr 0x01f00110 =0x00000000
reg_addr 0x01f00114 =0x00000000
DRAM DRIVE INFO: V1.5
DRAM CLK =432 MHZ
DRAM simple test OK.
dram size =1024
card boot number = 2
card no is 2
sdcard 2 line count 0
[mmc]: mmc driver ver 2014-07-07 16:54
[mmc]: ***Try SD card 2***
[mmc]: mmc 2 cmd 8 timeout, err 0x00000100
[mmc]: mmc 2 cmd 8 err 0x00000100
[mmc]: mmc 2 send if cond failed
[mmc]: mmc 2 cmd 55 timeout, err 0x00000100
[mmc]: mmc 2 cmd 55 err 0x00000100
[mmc]: mmc 2 send app cmd failed
[mmc]: ***Try MMC card 2***
[mmc]: MMC ver 4.3
[mmc]: SD/MMC Card: 4bit, capacity: 15680MB
[mmc]: vendor: Man 0x00150100 Snr 0x1705fa37
[mmc]: product: MAG8D
[mmc]: revision: 4.4
[mmc]: ***SD/MMC 2 init OK!!!***
sdcard 2 init ok
The size of uboot is 0x000c4000.
sum=0xa7d54832
src_sum=0xa7d54832
set_mmc_para,sdly 50M 0
set_mmc_para,sdly 25M 0
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
[      0.349]

U-Boot 2011.09-rc1-00000-g5a71e03-dirty (Nov 11 2016 - 10:49:33) Allwinner Technology 

[      0.359]version: 2.1.0
[      0.438]pmbus:   ready
[      0.441]PMU: AXP221
[      0.443]PMU: AXP22x found
[      0.446]PMU: dcdc3 1200
[      0.449]PMU: pll1 1008 Mhz,PLL6=600 Mhz
AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz 
set power on vol to default
dcdc1_vol = 3000
dcdc2_vol = 1100
dcdc3_vol = 1200
dcdc4_vol = 0
dcdc5_vol = 1500
aldo2_vol = 2500
aldo3_vol = 3000
find power_sply to end
vbus pc exist, limit to pc
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[      0.575]DRAM:  1 GiB
relocation Offset is: 35b0b000
smcl's set manager is NULL
workmode = 0
MMC:     2
[      0.776][mmc]: mmc driver ver 2014-07-15 17:16:00
[      0.781][mmc]: get sdc_2xmode ok, val = 1
[      0.785][mmc]: get sdc_f_max fail,use default sdc_f_max 50000000
[      0.791][mmc]: get card_line ok, card_line = 4
[      0.796][mmc]: get sdc_ex_dly_used fail,use default dly
[      0.801][mmc]: SUNXI SD/MMC: 2
[      1.106][mmc]: mmc 2 2xmode config clk
[      1.118][mmc]: ************Try SD card 2************
[      1.123][mmc]: mmc 2 cmd 8 timeout, err 100
[      1.128][mmc]: smc 2 err, cmd 8,  RTO
[      1.133][mmc]: mmc 2 mmc cmd 8 err 0x00000100
[      1.137][mmc]: mmc send if cond failed
[      1.141][mmc]: mmc 2 cmd 55 timeout, err 100
[      1.145][mmc]: smc 2 err, cmd 55,  RTO
[      1.151][mmc]: mmc 2 mmc cmd 55 err 0x00000100
[      1.155][mmc]: send app cmd failed
[      1.158][mmc]: ************Try MMC card 2************
[      1.185][mmc]: mmc 2 2xmode config clk
[      1.195][mmc]: mmc 2 2xmode config clk
[      1.205][mmc]: mmc 2 2xmode config clk
[      1.214][mmc]: MID 000015 PSN 05fa379e
[      1.217][mmc]: PNM MAG8DD -- 0x4d-41-47-38-44-44
[      1.222][mmc]: PRV 1.7
[      1.225][mmc]: MDT m-6 y-2010
[      1.228][mmc]: MMC ver 4.3
[      1.231][mmc]: ---------------mmc->clock 50000000-----------
[      1.236][mmc]: ---------------mmc->bus_width 4--------------
[      1.242][mmc]: SD/MMC Card: 4bit, capacity: 15680MB
[      1.247][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
[      1.252][mmc]: ************SD/MMC 2 init OK!!!************
[      1.258]sunxi flash init ok
sunxi secure storage is not supported
[      1.266]usb burn from boot
delay time 0
[      1.337]usb prepare ok
usb sof ok
[      1.546]usb probe ok
[      1.548]usb setup ok
set address 0x4
[      4.550]timer occur
[      4.585]do_burn_from_boot usb : have no handshake
In:    serial
Out:   serial
Err:   serial
--------fastboot partitions--------
-total partitions:13-
-name-        -start-       -size-      
bootloader  : 1000000       2000000     
env         : 3000000       1000000     
boot        : 4000000       1000000     
system      : 5000000       30000000    
data        : 35000000      40000000    
misc        : 75000000      1000000     
recovery    : 76000000      2000000     
cache       : 78000000      8000000     
metadata    : 80000000      1000000     
private     : 81000000      1000000     
klog        : 82000000      1000000     
alog        : 83000000      4000000     
UDISK       : 87000000      0           
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_mmc
key 0
recovery key high 5, low 3
cant find fstbt value
misc partition found
misc_message->command = 0 
to be run cmd=run setargs_mmc boot_normal
mount part name bootloader
cant open script.bin, maybe it is not exist
WORK_MODE_BOOT
board_status_probe
[      4.702]pre sys mode
sunxi_bmp_logo_display
[      4.983][mmc]: blkcnt should not be 0
screen_id =0, screen_width =800, screen_height =1280
[      5.018]Hit any key to stop autoboot:  0 
read boot or recovery all
[      5.962]sunxi flash read :offset 4000000, 13981743 bytes OK
no signature
[      5.974]ready to boot
para err in disp_ioctl, cmd = 0xa,screen id = 1
[      5.981][mmc]: mmc exit start
[      5.985][mmc]: mmc 2 2xmode config clk
[      5.995][mmc]: mmc 2 2xmode config clk
[      6.007][mmc]: mmc 2 cmd 8 timeout, err 100
[      6.012][mmc]: smc 2 err, cmd 8,  RTO
[      6.017][mmc]: mmc 2 mmc cmd 8 err 0x00000100
[      6.021][mmc]: mmc send if cond failed
[      6.025][mmc]: mmc 2 cmd 55 timeout, err 100
[      6.029][mmc]: smc 2 err, cmd 55,  RTO
[      6.035][mmc]: mmc 2 mmc cmd 55 err 0x00000100
[      6.039][mmc]: send app cmd failed
[      6.052][mmc]: mmc 2 exit ok
[      6.055]
Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.4.39 (liuzi@gpt-software-server1) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #826 SMP PREEMPT Fri Nov 11 10:41:04 CST 2016
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: sun8i
[    0.000000] cma: CMA: reserved 176 MiB at 75000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] On node 0 totalpages: 262144
[    0.000000] free_area_init_node: node 0, pgdat c09a7d00, node_mem_map c12a4000
[    0.000000]   Normal zone: 1710 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 192850 pages, LIFO batch:31
[    0.000000]   HighMem zone: 594 pages used for memmap
[    0.000000]   HighMem zone: 66990 pages, LIFO batch:15
[    0.000000] script_init enter!
[    0.000000] script_init exit!
[    0.000000] PERCPU: Embedded 8 pages/cpu @c1bbd000 s10688 r8192 d13888 u32768
[    0.000000] pcpu-alloc: s10688 r8192 d13888 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259840
[    0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p7 init=/init ion_cma_512m=120m ion_cma_1g=176m ion_carveout_512m=96m ion_carveout_1g=150m coherent_pool=4m loglevel=8 partitions=bootloader@mmcblk0p2:env@mmcblk0p5:boot@mmcblk0p6:system@mmcblk0p7:data@mmcblk0p8:misc@mmcblk0p9:recovery@mmcblk0p10:cache@mmcblk0p11:metadata@mmcblk0p12:private@mmcblk0p13:klog@mmcblk0p14:alog@mmcblk0p15:UDISK@mmcblk0p1 boot_type=2 config_size=41512
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Memory: 1024MB = 1024MB total
[    0.000000] Memory: 843876k/843876k available, 204700k reserved, 90112K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc08ea49c   (9098 kB)
[    0.000000]       .init : 0xc08eb000 - 0xc093d9c0   ( 331 kB)
[    0.000000]       .data : 0xc093e000 - 0xc09b8cc8   ( 492 kB)
[    0.000000]        .bss : 0xc09ba098 - 0xc0b32788   (1506 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:416
[    0.000000] try to syncboot of clk ats
[    0.000000] try to syncboot of clk sdmmc2
[    0.000000] try to syncboot of clk uart0
[    0.000000] try to syncboot of clk pll_ddr1
[    0.000000] try to syncboot of clk debe0
[    0.000000] try to syncboot of clk dma
[    0.000000] try to syncboot of clk sat
[    0.000000] try to syncboot of clk pio
[    0.000000] try to syncboot of clk mbus
[    0.000000] try to syncboot of clk drc0
[    0.000000] try to syncboot of clk mipidphy
[    0.000000] try to syncboot of clk lcd0ch0
[    0.000000] try to syncboot of clk axi
[    0.000000] try to syncboot of clk mipidsi
[    0.000000] Architected local timer running at 24.00MHz.
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] Console: colour dummy device 80x30
[    0.000267] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
[    0.000294] pid_max: default: 32768 minimum: 301
[    0.000524] Security Framework initialized
[    0.000585] SELinux:  Initializing.
[    0.000658] SELinux:  Starting in permissive mode
[    0.000674] AppArmor: AppArmor disabled by boot time parameter
[    0.000779] Mount-cache hash table entries: 512
[    0.001948] Initializing cgroup subsys debug
[    0.001968] Initializing cgroup subsys cpuacct
[    0.001979] Initializing cgroup subsys freezer
[    0.002026] CPU: Testing write buffer coherency: ok
[    0.002076] ftrace: allocating 23549 entries in 70 pages
[    0.030385] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.030407] [sunxi_smp_prepare_cpus] enter
[    0.030462] Setting up static identity map for 0x4063a130 - 0x4063a188
[    0.010000] CPU1: Booted secondary processor
[    0.010000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.010000] CPU2: Booted secondary processor
[    0.010000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.010000] CPU3: Booted secondary processor
[    0.010000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.210199] Brought up 4 CPUs
[    0.210199] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
[    0.210458] devtmpfs: initialized
[    0.220716] pinctrl core: initialized pinctrl subsystem
[    0.220716] dummy: 
[    0.228037] NET: Registered protocol family 16
[    0.245461] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.245552] script_sysfs_init success
[    0.245590] sunxi_dump_init success
[    0.245906] sunxi pinctrl probe enter
[    0.246645] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
[    0.247845] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
[    0.248074] axp_pinctrl_probe enter...
[    0.248266] gpiochip_add: registered GPIOs 1024 to 1029 on device: axp-pinctrl
[    0.248289] mainkey total count : 79
[    0.248299] mainkey name : product, pin count : 0
[    0.248310] mainkey name : platform, pin count : 0
[    0.248321] mainkey name : target, pin count : 0
[    0.248332] mainkey name : key_detect_en, pin count : 0
[    0.248344] mainkey name : power_sply, pin count : 0
[    0.248355] mainkey name : card_boot, pin count : 0
[    0.248367] mainkey name : card0_boot_para, pin count : 6
[    0.248382] mainkey name : card2_boot_para, pin count : 6
[    0.248395] mainkey name : twi_para, pin count : 2
[    0.248407] mainkey name : uart_para, pin count : 2
[    0.248418] mainkey name : force_uart_para, pin count : 2
[    0.248429] mainkey name : jtag_para, pin count : 4
[    0.248440] mainkey name : clock, pin count : 0
[    0.248450] mainkey name : pm_para, pin count : 0
[    0.248460] mainkey name : dram_para, pin count : 0
[    0.248470] mainkey name : pm_para, pin count : 0
[    0.248480] mainkey name : wakeup_src_para, pin count : 2
[    0.248491] mainkey name : twi0, pin count : 2
[    0.248501] mainkey name : twi1, pin count : 2
[    0.248512] mainkey name : twi2, pin count : 2
[    0.248522] mainkey name : uart0, pin count : 2
[    0.248532] mainkey name : uart1, pin count : 4
[    0.248543] mainkey name : uart2, pin count : 4
[    0.248554] mainkey name : uart3, pin count : 4
[    0.248565] mainkey name : uart4, pin count : 4
[    0.248575] mainkey name : spi0, pin count : 4
[    0.248586] mainkey name : spi1, pin count : 4
[    0.248597] mainkey name : spi_devices, pin count : 0
[    0.248607] mainkey name : spi_board0, pin count : 0
[    0.248617] mainkey name : ctp_para, pin count : 2
[    0.248628] mainkey name : ctp_list_para, pin count : 0
[    0.248639] mainkey name : tkey_para, pin count : 0
[    0.248649] mainkey name : motor_para, pin count : 1
[    0.248662] map mainkey [motor_para] to pinctrl, map number [2]
[    0.248676] mainkey name : ths_para, pin count : 0
[    0.248686] mainkey name : cooler_table, pin count : 0
[    0.248697] mainkey name : nand0_para, pin count : 19
[    0.248710] mainkey name : disp_init, pin count : 0
[    0.248722] mainkey name : lcd0_para, pin count : 3
[    0.248735] map mainkey [lcd0_para] to pinctrl, map number [2]
[    0.248749] mainkey name : pwm0_para, pin count : 1
[    0.248761] mainkey name : pwm1_para, pin count : 1
[    0.248773] mainkey name : csi0, pin count : 17
[    0.248786] mainkey name : camera_list_para, pin count : 0
[    0.248798] mainkey name : mmc0_para, pin count : 6
[    0.248810] mainkey name : mmc1_para, pin count : 6
[    0.248822] mainkey name : mmc2_para, pin count : 11
[    0.248834] mainkey name : usbc0, pin count : 2
[    0.248844] map mainkey [usbc0] to pinctrl, map number [2]
[    0.248856] mainkey name : usbc1, pin count : 0
[    0.248867] mainkey name : usb_feature, pin count : 0
[    0.248877] mainkey name : msc_feature, pin count : 0
[    0.248888] mainkey name : serial_feature, pin count : 0
[    0.248899] mainkey name : gsensor_para, pin count : 1
[    0.248910] mainkey name : gsensor_list_para, pin count : 0
[    0.248921] mainkey name : gps_para, pin count : 0
[    0.248931] mainkey name : wifi_para, pin count : 8
[    0.248943] mainkey name : bt_para, pin count : 0
[    0.248954] mainkey name : 3g_para, pin count : 4
[    0.248965] mainkey name : gy_para, pin count : 0
[    0.248975] mainkey name : gy_list_para, pin count : 0
[    0.248986] mainkey name : ls_para, pin count : 1
[    0.248997] mainkey name : ls_list_para, pin count : 0
[    0.249007] mainkey name : compass_para, pin count : 0
[    0.249018] mainkey name : i2s0, pin count : 4
[    0.249029] mainkey name : i2s1, pin count : 4
[    0.249040] mainkey name : audio0, pin count : 1
[    0.249051] mainkey name : pmu1_para, pin count : 0
[    0.249061] mainkey name : pmu2_para, pin count : 0
[    0.249072] mainkey name : recovery_key, pin count : 0
[    0.249083] mainkey name : dvfs_table, pin count : 0
[    0.249093] mainkey name : Vdevice, pin count : 2
[    0.249104] mainkey name : s_uart0, pin count : 2
[    0.249115] mainkey name : s_rsb0, pin count : 2
[    0.249126] mainkey name : s_jtag0, pin count : 4
[    0.249138] mainkey name : s_powchk, pin count : 0
[    0.249148] mainkey name : mali_para, pin count : 0
[    0.249159] mainkey name : dram_dvfs_table, pin count : 0
[    0.249170] mainkey name : charging_type, pin count : 0
[    0.249181] mainkey name : dram_scene_table, pin count : 0
[    0.249192] mainkey name : leds_para, pin count : 2
[    0.249204] map mainkey [leds_para] to pinctrl, map number [4]
[    0.249217] mainkey name : custom, pin count : 0
[    0.249225] axp pinctrl driver probe ok
[    0.250923] [sunxi-module]: [sunxi-module.0] probe success
[    0.250975] script config pll3 to 297 Mhz
[    0.250991] script config pll4 to 300 Mhz
[    0.251030] script config pll6 to 600 Mhz
[    0.251044] script config pll8 to 408 Mhz
[    0.251066] script config pll9 to 480 Mhz
[    0.251080] script config pll10 to 297 Mhz
[    0.251089] sunxi_default_clk_init
[    0.251097] try to set pll6ahb1 to 200000000
[    0.251150] try to set ahb clk source to pll6ahb1
[    0.251161] set ahb clk source to pll6ahb1
[    0.251172] try to set ahb1 to 200000000
[    0.251184] try to set apb1 to 100000000
[    0.260314] bio: create slab <bio-0> at 0
[    0.260521] [ARISC] :sunxi-arisc driver v1.60
[    0.296387] [ARISC] :arisc version: [v0.0.76]
[    0.296402] [sunxi-module]: arisc register success
[    0.515874] [ARISC] :sunxi-arisc driver v1.60 startup succeeded
[    0.520572] SCSI subsystem initialized
[    0.520824] usbcore: registered new interface driver usbfs
[    0.520906] usbcore: registered new interface driver hub
[    0.520953] usbcore: registered new device driver usb
[    0.520953] twi_chan_cfg()350 - [twi0] has no twi_regulator.
[    0.520953] twi_chan_cfg()350 - [twi1] has no twi_regulator.
[    0.520953] twi_chan_cfg()350 - [twi2] has no twi_regulator.
[    0.521221] Linux video capture interface: v2.00
[    0.520047] axp22_board axp22_board: AXP (CHIP ID: 0x06) detected
[    0.522122] axp22_dcdc1: 1600 <--> 3400 mV at 3000 mV 
[    0.522122] axp22_dcdc2: 600 <--> 1540 mV at 1100 mV 
[    0.522122] axp22_dcdc3: 600 <--> 1860 mV at 1200 mV 
[    0.522122] axp22_dcdc4: 600 <--> 1540 mV at 1100 mV 
[    0.522122] axp22_dcdc5: 1000 <--> 2550 mV at 1500 mV 
[    0.522122] axp22_rtc: 3000 mV 
[    0.522122] axp22_aldo1: 700 <--> 3300 mV at 3000 mV 
[    0.522122] axp22_aldo2: 700 <--> 3300 mV at 2500 mV 
[    0.522122] axp22_aldo3: 700 <--> 3300 mV at 3000 mV 
[    0.522122] axp22_dldo1: 700 <--> 3300 mV at 700 mV 
[    0.522122] axp22_dldo2: 700 <--> 3300 mV at 700 mV 
[    0.530253] axp22_dldo3: 700 <--> 3300 mV at 700 mV 
[    0.530253] axp22_dldo4: 700 <--> 3300 mV at 700 mV 
[    0.530253] axp22_eldo1: 700 <--> 3300 mV at 700 mV 
[    0.530253] axp22_eldo1: supplied by axp22_dcdc1
[    0.530295] axp22_eldo2: 700 <--> 3300 mV at 700 mV 
[    0.530295] axp22_eldo2: supplied by axp22_dcdc1
[    0.530295] axp22_eldo3: 700 <--> 3300 mV at 700 mV 
[    0.530295] axp22_eldo3: supplied by axp22_dcdc1
[    0.530295] axp22_dc5ldo: 700 <--> 1400 mV at 1100 mV 
[    0.530295] axp22_ldoio0: 700 <--> 3300 mV at 3800 mV 
[    0.530295] axp22_ldoio1: 700 <--> 3300 mV at 3800 mV 
[    0.530295] axp22_dc1sw: at 700 mV 
[    0.530295] axp22_dc1sw: supplied by axp22_dcdc1
[    0.530435] input: axp22-supplyer as /devices/platform/axp22_board/axp22-supplyer.20/input/input0
[    0.530690] now_rest_vol = 100
[    0.530690] Advanced Linux Sound Architecture Driver Version 1.0.25.
[    0.530926] Bluetooth: Core ver 2.16
[    0.531003] NET: Registered protocol family 31
[    0.531015] Bluetooth: HCI device and connection manager initialized
[    0.531030] Bluetooth: HCI socket layer initialized
[    0.531041] Bluetooth: L2CAP socket layer initialized
[    0.531076] Bluetooth: SCO socket layer initialized
[    0.531387] cfg80211: Calling CRDA to update world regulatory domain
[    0.531426] Switching to clocksource arch_sys_counter
[    0.554736] FS-Cache: Loaded
[    0.555130] CacheFiles: Loaded
[    0.566640] [sunxi_hci_sunxi]: sunxi-ehci1(restrict_gpio) is invalid
[    0.566658] [sunxi_hci_sunxi]: sunxi-ehci1(drv vbus) is invalid
[    0.566674] [sunxi_hci_sunxi]: get usb_regulator is nocare
[    0.566714] [sunxi_hci_sunxi]: sunxi-ohci1(restrict_gpio) is invalid
[    0.566726] [sunxi_hci_sunxi]: sunxi-ohci1(drv vbus) is invalid
[    0.566739] [sunxi_hci_sunxi]: get usb_regulator is nocare
[    0.566897] [sunxi_hci_sunxi]: usb1 sunxi-ohci1 is not enable
[    0.566909] [usb_manager]: CONFIG_USB_SUNXI_USB0_OTG
[    0.566935] no usbc(0) det_vbus gpio and try to axp det_pin
[    0.566948] get usbc0(usb_restrict pin) failed
[    0.567373] [sw_udc]: udc_init: version 20080411
[    0.567923] [ddrfreq] dram_clk value is 432
[    0.567934] [ddrfreq] sunxi_ddrfreq_max=432000
[    0.567946] [ddrfreq] dram_type value is 3
[    0.567956] [ddrfreq] dram_zq value is 0x3bbb
[    0.567966] [ddrfreq] dram_odt_en value is 1
[    0.567977] [ddrfreq] dram_para1 value is 0x10f20400
[    0.567988] [ddrfreq] dram_para2 value is 0x1000
[    0.567998] [ddrfreq] dram_mr0 value is 0x1c70
[    0.568008] [ddrfreq] dram_mr1 value is 0x4
[    0.568018] [ddrfreq] dram_mr2 value is 0x18
[    0.568028] [ddrfreq] dram_mr3 value is 0x0
[    0.568039] [ddrfreq] dram_tpr0 value is 0x45a10c
[    0.568049] [ddrfreq] dram_tpr1 value is 0x1c22109
[    0.568060] [ddrfreq] dram_tpr2 value is 0x4c034
[    0.568071] [ddrfreq] dram_tpr3 value is 0x0
[    0.568081] [ddrfreq] dram_tpr4 value is 0x0
[    0.568090] [ddrfreq] dram_tpr5 value is 0x0
[    0.568101] [ddrfreq] dram_tpr6 value is 0x0
[    0.568111] [ddrfreq] dram_tpr7 value is 0x0
[    0.568121] [ddrfreq] dram_tpr8 value is 0x0
[    0.568131] [ddrfreq] dram_tpr9 value is 0x0
[    0.568141] [ddrfreq] dram_tpr10 value is 0x0
[    0.568151] [ddrfreq] dram_tpr11 value is 0x0
[    0.568161] [ddrfreq] dram_tpr12 value is 168
[    0.568171] [ddrfreq] sunxi_ddrfreq_min=168000
[    0.568181] [ddrfreq] dram_tpr13 value is 0x10901
[    0.568355] [dsm] use sysconfig
[    0.568364] [dsm] -----------Dram scene-freq Table------------
[    0.568375] [dsm] scene =    0       frequency = 432000KHz
[    0.568385] [dsm] scene =    1       frequency = 360000KHz
[    0.568395] [dsm] scene =    2       frequency = 240000KHz
[    0.568405] [dsm] scene =    3       frequency = 168000KHz
[    0.568414] [dsm] --------------------------------------------
[    0.568562] [ddrfreq] LV_count value is 3
[    0.568586] [ddrfreq] ---------------Dram V-F Table---------------
[    0.568598] [ddrfreq] voltage = 1100mv       frequency = 552000KHz
[    0.568609] [ddrfreq] voltage = 1100mv       frequency = 360000KHz
[    0.568619] [ddrfreq] voltage = 1100mv       frequency =    0KHz
[    0.568629] [ddrfreq] --------------------------------------------
[    0.568825] [ddrfreq] last_vdd=1100
[    0.568913] [ddrfreq] __sram_start: 0xc09b9000, __sram_end: 0xc09ba074, __sram_text_start: 0xf0000000, __sram_data_end: 0xf0001074
[    0.568928] [ddrfreq] sunxi dramfreq probe ok!
[    0.569290] NET: Registered protocol family 2
[    0.569620] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.570487] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.572391] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[    0.573317] TCP: Hash tables configured (established 131072 bind 65536)
[    0.573331] TCP: reno registered
[    0.573346] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.573387] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.573759] NET: Registered protocol family 1
[    0.574241] RPC: Registered named UNIX socket transport module.
[    0.574256] RPC: Registered udp transport module.
[    0.574266] RPC: Registered tcp transport module.
[    0.574275] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.574553] Unpacking initramfs...
[    0.770357] Freeing initrd memory: 2700K
[    0.770846] [pm]aw_pm_init!
[    0.770861] standby_mode = 1. 
[    0.770870] wakeup src cnt is : 2. 
[    0.770883] [exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
[    0.770895] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x80
[    0.770908] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
[    0.770920] [exstandby]leave extended_standby_enable_wakeup_src : event 0x2000
[    0.770932] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x280
[    0.770944] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
[    0.770969] [wifi]: select wifi: rtl8723cs !!
[    0.771252] [rtl8723cs]: module power name axp22_dldo1
[    0.771267] [rtl8723cs]: module power ext1 name axp22_dldo2
[    0.771280] [rtl8723cs]: module power ext2 name 
[    0.771431] [rtl8723cs]: get ap6xxx wifi_power_switch failed
[    0.771442] [rtl8723cs]: rtl8723cs module power set by axp.
[    0.771630] [rtl8723cs]: get power regulator  failed.
[    0.771642] [rtl8723cs]: first time
[    0.771819] [rtl8723cs]: regulator on.
[    0.773259] [wifi_pm]: wifi gpio init is OK !!
[    0.773313] sunxi_reg_init enter
[    0.773656] sunxi_oops: heming add OOPS_INFO_ADDR = -20
[    0.774366] audit: initializing netlink socket (disabled)
[    0.774437] type=2000 audit(0.770:1): initialized
[    0.775267] highmem bounce pool size: 64 pages
[    0.777460] NTFS driver 2.1.30 [Flags: R/W].
[    0.777671] fuse init (API version 7.18)
[    0.778199] msgmni has been set to 1477
[    0.778246] SELinux:  Registering netfilter hooks
[    0.780666] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.780688] io scheduler noop registered
[    0.780698] io scheduler deadline registered
[    0.780799] io scheduler cfq registered (default)
[    0.781286] pwm module init!
[    0.781922] sw_uart_get_devinfo()1416 - uart0 has no uart_regulator.
[    0.781941] sw_uart_get_devinfo()1416 - uart1 has no uart_regulator.
[    0.782386] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[    0.782413] sw_console_setup()1176 - console setup baud 115200 parity n bits 8, flow n
[    0.975367] console [ttyS0] enabled
[    1.071905] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
[    1.267964] loop: module loaded
[    1.363630] sunxi_spi_chan_cfg()1368 - [spi-0] has no spi_regulator.
[    1.650089] sunxi_spi_chan_cfg()1368 - [spi-1] has no spi_regulator.
[    2.785666] tun: Universal TUN/TAP device driver, 1.6
[    2.791291] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.798419] PPP generic driver version 2.4.2
[    2.803378] PPP BSD Compression module registered
[    2.808612] PPP Deflate Compression module registered
[    2.815218] PPP MPPE Compression module registered
[    2.820577] NET: Registered protocol family 24
[    2.825548] PPTP driver version 0.8.5
[    2.829970] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.837361] [sunxi_hci_sunxi]: [sunxi-ehci1]: probe, pdev->name: sunxi-ehci, pdev->id: 1, sunxi_ehci: 0xc0a24eec
[    2.848715] [sunxi_hci_sunxi]: [sunxi-ehci1]: open clock, is_open: 0
[    2.875805] [sunxi_hci_sunxi]: [sunxi-ehci1]: Set USB Power ON
[    2.882297] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.891243] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
[    2.901449] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
[    2.920052] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
[    2.927405] hub 1-0:1.0: USB hub found
[    2.931627] hub 1-0:1.0: 1 port detected
[    2.936394] [sunxi_hci_sunxi]: [sunxi-ehci1]: sunxi_usb_disable_ehci
[    2.943483] [sunxi_hci_sunxi]: [sunxi-ehci1]: remove, pdev->name: sunxi-ehci, pdev->id: 1, sunxi_ehci: 0xc0a24eec
[    2.954899] sunxi-ehci sunxi-ehci.1: remove, state 1
[    2.960445] usb usb1: USB disconnect, device number 1
[    2.967100] sunxi-ehci sunxi-ehci.1: USB bus 1 deregistered
[    2.973329] [sunxi_hci_sunxi]: [sunxi-ehci1]: Set USB Power OFF
[    2.979901] [sunxi_hci_sunxi]: [sunxi-ehci1]: close clock, is_open: 1
[    2.997124] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.004193] usbcore: registered new interface driver cdc_acm
[    3.010623] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    3.019531] Initializing USB Mass Storage driver...
[    3.025027] usbcore: registered new interface driver usb-storage
[    3.031728] USB Mass Storage support registered.
[    3.036887] usbcore: registered new interface driver ums-alauda
[    3.043531] usbcore: registered new interface driver ums-cypress
[    3.050244] usbcore: registered new interface driver ums-datafab
[    3.056958] usbcore: registered new interface driver ums_eneub6250
[    3.063863] usbcore: registered new interface driver ums-freecom
[    3.070596] usbcore: registered new interface driver ums-isd200
[    3.077200] usbcore: registered new interface driver ums-jumpshot
[    3.084031] usbcore: registered new interface driver ums-karma
[    3.090556] usbcore: registered new interface driver ums-onetouch
[    3.097381] usbcore: registered new interface driver ums-realtek
[    3.104098] usbcore: registered new interface driver ums-sddr09
[    3.110736] usbcore: registered new interface driver ums-sddr55
[    3.117337] usbcore: registered new interface driver ums-usbat
[    3.123952] usbcore: registered new interface driver usbserial
[    3.130444] usbserial: USB Serial Driver core
[    3.135332] usbcore: registered new interface driver option
[    3.141569] USB Serial support registered for GSM modem (1-port)
[    3.148494] [sw_udc]: [sunxi_usb_udc]: binding gadget driver 'android_usb'
[    3.156168] [sw_udc]: alloc request: ep(0xc0987090, ep0, 64), req(0xee9817c0)
[    3.164128] sunxi_udc_set_selfpowered_2300: usb device is not active
[    3.171195] [sw_udc]: sunxi_udc_pullup, is_on = 0
[    3.176427] sunxi_udc_set_pullup_2317: usb device is not active
[    3.183121] file system registered
[    3.188713] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    3.196394] android_usb gadget: Number of LUNs=2
[    3.201534]  lun0: LUN: removable file: (no medium)
[    3.206961]  lun1: LUN: removable file: (no medium)
[    3.212757] android_bind, serial_unique = 1
[    3.217418] sunxi_udc_set_selfpowered_2300: usb device is not active
[    3.224498] android_usb gadget: android_usb ready
[    3.229746] [sw_hcd0]: usb host driver initialize........
[    3.235864] [sw_hcd0]: open_usb_clock
[    3.240286] [sunxi_hcd0]: host_init_state = 0
[    3.245370] [sw_hcd0]: platform is usb host
[    3.250109] [sw_hcd0]: sunxi_hcd_init_controller: sunxi_hcd_host0: USB Host mode controller at f1c19000 using PIO, IRQ 103
[    3.262408] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
[    3.269290] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 1
[    3.279237] hub 1-0:1.0: USB hub found
[    3.283450] hub 1-0:1.0: 1 port detected
[    3.288217] [sw_hcd0]: sunxi_usb_host0_disable start
[    3.293761] [sw_hcd0]: sunxi_hcd_wait_for_disconnect cnt=0
[    3.299864] [sunxi_hcd_host0]: Set USB Power OFF
[    3.305113] -------sunxi_hcd0_soft_disconnect---------
[    3.310829] wrn: hcd is not enable, need not stop hcd
[    3.316448] [sunxi_hcd_host0]: Set USB Power OFF
[    3.321727] [sw_hcd0]: close_usb_clock
[    3.325914] [sw_hcd0]: sunxi_usb_host0_disable end
[    3.331675] mousedev: PS/2 mouse device common for all mice
[    3.338823] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
[    3.346357] sunxi cedar version 0.1 
[    3.350395] [cedar]: install start!!!
[    3.354723] [cedar]: install end!!!
[    3.361759] axp22_dcdc1: Failed to create debugfs directory
[    3.369643] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[    3.379089] Bluetooth: HCI UART driver ver 2.2
[    3.384134] Bluetooth: HCI H4 protocol initialized
[    3.389451] Bluetooth: HCI BCSP protocol initialized
[    3.395080] usbcore: registered new interface driver btusb
[    3.401185] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[    3.407512] Bluetooth: BlueSleep Mode Driver Ver 1.1
[    3.413772] autohotplug_init init ok
[    3.417780] sunxi_cpufreq_initcall: clocks pll=1008000000,cpu=1008000000,axi=336000000
[    3.426596] cur: pll=1008000000, cpudiv=1, axidiv=3
[    3.432062] axp22_dcdc3: Failed to create debugfs directory
[    3.438260] sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 1200MHz, min freq: 120MHz
[    3.448952] -------------------CPU V-F Table--------------------
[    3.455632]  frequency = 1536000KHz  voltage = 1500mv
[    3.461263]  frequency = 1344000KHz  voltage = 1460mv
[    3.466867]  frequency = 1200000KHz  voltage = 1320mv
[    3.472498]  frequency = 1008000KHz  voltage = 1200mv
[    3.478101]  frequency = 816000KHz   voltage = 1100mv
[    3.483692]  frequency = 648000KHz   voltage = 1040mv
[    3.489200]  frequency =    0KHz     voltage = 1040mv
[    3.494549]  frequency =    0KHz     voltage = 1040mv
[    3.499862] -----------------------------------------------------
[    3.509070] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.85 2014-08-01 15:11) Compiled in Oct 22 2016 at 09:18:17
[    3.520483] [mmc]: sunxi_mci_init
[    3.524173] [mmc]: get mmc0's power supply 'axp22_dcdc1' ok
[    3.530365] [mmc]: get mmc0's 2xmode fail
[    3.534808] [mmc]: get mmc0's ddrmode fail
[    3.539347] [mmc]: get mmc0's sdc_ex_dly_used failed, use default dly
[    3.546513] [mmc]: get mmc1's sdc_power failed
[    3.551451] [mmc]: get mmc1's 2xmode fail
[    3.555894] [mmc]: get mmc1's ddrmode fail
[    3.560445] [mmc]: get mmc1's sdc_ex_dly_used failed, use default dly
[    3.567602] [mmc]: get mmc2's power supply 'axp22_dcdc1' ok
[    3.573790] [mmc]: get mmc2's 2xmode ok, val = 1
[    3.578908] [mmc]: get mmc2's ddrmode fail
[    3.583459] [mmc]: get mmc2's sdc_ex_dly_used failed, use default dly
[    3.590615] [mmc]: MMC host used card: 0x7, boot card: 0x4, io_card 2
[    3.599629] [mmc]: mmc not poweroff notifiy
[    3.604311] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    3.615159] [mmc]: sdc2 Probe: base:0xf1c11000 irq:94 sg_cpu:f001e000(75400000) ret 0.
[    3.615176] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[    3.616711] [mmc]: sdc2 card_power_on start...
[    3.616747] axp22_dcdc1: Failed to create debugfs directory
����




script dump



defines.txt

DATE: 04/16/17 TIME: 17:14:26

    name:      3g_para
    sub_key:   name           type      value
               bb_pwr_on      gpio      (gpio: 0x163 / PL3, mul: 1, pull -1, drv -1, data 0)
               bb_wake        gpio      (gpio: 0x164 / PL4, mul: 1, pull -1, drv -1, data 0)
               bb_rf_dis      gpio      (gpio: 0x16b / PL11, mul: 1, pull -1, drv -1, data 0)
               bb_rst         gpio      (gpio: 0x165 / PL5, mul: 1, pull -1, drv -1, data 0)
               bb_vbat        invalid type!
               bb_on          invalid type!
               3g_used        int       0
               3g_usbc_num    int       1
               3g_uart_num    int       2
               bb_name        string    "em66"
               bb_dldo        string    "axp22_aldo1"
               bb_dldo_min_uV int       2800000
               bb_dldo_max_uV int       2800000
 
    name:      audio0
    sub_key:   name           type      value
               audio_pa_ctrl  gpio      (gpio: 0xe9 / PH9, mul: 1, pull -1, drv -1, data 0)
               audio_hp_ldo   string    "none"
               headphone_vol  int       59
               earpiece_vol   int       62
               cap_vol        int       5
               pa_single_vol  int       58
               pa_double_used int       0
               pa_double_vol  int       58
               headphone_direct_usedint       1
               headset_mic_volint       3
               main_mic_vol   int       1
               audio_used     int       1
               aif2_used      int       0
               aif3_used      int       0
               headphone_mute_usedint       0
               DAC_VOL_CTRL_SPKint       41120
               DAC_VOL_CTRL_HEADPHONEint       41120
               agc_used       int       0
               drc_used       int       0
 
    name:      bt_para
    sub_key:   name           type      value
               bt_used        int       1
               bt_uart_id     int       1
 
    name:      camera_list_para
    sub_key:   name           type      value
               camera_list_para_usedint       1
               ov7670         int       0
               gc0307         int       0
               gc0308         int       1
               gc0312         int       1
               gc0329         int       1
               gc0309         int       1
               gc0328         int       1
               gc2145         int       1
               gc2035         int       1
               gc2155         int       1
               siv121d        int       1
               siv121du       int       0
               bf3a03         int       0
               bf3603         int       0
               bf3703         int       0
               bf3920         int       0
               sp0838         int       0
               sp0a19         int       0
               sp2519         int       0
               s5k4ec         int       1
               hi253          int       0
               hi704          int       1
               mt9d112        int       0
               mt9m112        int       0
               mt9m113        int       0
               ov7670         int       0
               ov2655         int       0
               ov5640         int       0
               ov5647         int       0
               ov2643         int       0
 
    name:      card_boot
    sub_key:   name           type      value
               logical_start  int       40960
               sprite_gpio0   invalid type!
               next_work      int       3
 
    name:      charging_type
    sub_key:   name           type      value
               charging_type  int       1
 
    name:      clock
    sub_key:   name           type      value
               pll3           int       297
               pll4           int       300
               pll6           int       600
               pll8           int       408
               pll9           int       480
               pll10          int       297
               pll_cpupat     int       0
               pll_gpupat     int       -1002379674
               pll_videopat   int       0
               pll_vepat      int       0
               pll_hsicpat    int       0
               pll_depat      int       0
               pll_mipipat    int       0
               pll_mipitun    int       -1979703288
               pll_mipibias   int       -133168128
 
    name:      compass_para
    sub_key:   name           type      value
               compass_used   int       0
               compass_twi_id int       1
               compass_twi_addrint       13
               compass_int    invalid type!
 
    name:      cooler_table
    sub_key:   name           type      value
               cooler_count   int       4
               cooler0        string    "1344000 4 4294967295 0"
               cooler1        string    "1200000 4 4294967295 0"
               cooler2        string    "1008000 4 4294967295 0"
               cooler3        string    "648000 4 4294967295 0"
 
    name:      csi0
    sub_key:   name           type      value
               vip_csi_pck    gpio      (gpio: 0x80 / PE0, mul: 2, pull -1, drv -1, data -1)
               vip_csi_mck    gpio      (gpio: 0x81 / PE1, mul: 2, pull -1, drv -1, data -1)
               vip_csi_hsync  gpio      (gpio: 0x82 / PE2, mul: 2, pull -1, drv -1, data -1)
               vip_csi_vsync  gpio      (gpio: 0x83 / PE3, mul: 2, pull -1, drv -1, data -1)
               vip_csi_d0     gpio      (gpio: 0x84 / PE4, mul: 2, pull -1, drv -1, data -1)
               vip_csi_d1     gpio      (gpio: 0x85 / PE5, mul: 2, pull -1, drv -1, data -1)
               vip_csi_d2     gpio      (gpio: 0x86 / PE6, mul: 2, pull -1, drv -1, data -1)
               vip_csi_d3     gpio      (gpio: 0x87 / PE7, mul: 2, pull -1, drv -1, data -1)
               vip_csi_d4     gpio      (gpio: 0x88 / PE8, mul: 2, pull -1, drv -1, data -1)
               vip_csi_d5     gpio      (gpio: 0x89 / PE9, mul: 2, pull -1, drv -1, data -1)
               vip_csi_d6     gpio      (gpio: 0x8a / PE10, mul: 2, pull -1, drv -1, data -1)
               vip_csi_d7     gpio      (gpio: 0x8b / PE11, mul: 2, pull -1, drv -1, data -1)
               vip_dev0_reset gpio      (gpio: 0x8e / PE14, mul: 1, pull -1, drv -1, data 0)
               vip_dev0_pwdn  gpio      (gpio: 0x8f / PE15, mul: 1, pull -1, drv -1, data 1)
               vip_dev0_flash_engpio      (gpio: 0x20 / PB0, mul: 1, pull -1, drv -1, data 0)
               vip_dev1_reset gpio      (gpio: 0x8e / PE14, mul: 1, pull -1, drv -1, data 0)
               vip_dev1_pwdn  gpio      (gpio: 0x91 / PE17, mul: 1, pull -1, drv -1, data 1)
               vip_dev0_pos   string    "rear"
               vip_dev0_lane  int       1
               vip_dev0_twi_idint       2
               vip_dev0_twi_addrint       120
               vip_dev0_isp_usedint       0
               vip_dev0_fmt   int       0
               vip_dev0_stby_modeint       0
               vip_dev0_vflip int       0
               vip_dev0_hflip int       0
               vip_dev0_iovdd string    "axp22_dldo3"
               vip_dev0_iovdd_volint       2800000
               vip_dev0_avdd  string    "axp22_ldoio0"
               vip_dev0_avdd_volint       2800000
               vip_dev0_dvdd  string    "axp22_eldo2"
               vip_dev0_dvdd_volint       1800000
               vip_dev0_afvdd string    ""
               vip_dev0_afvdd_volint       2800000
               vip_dev0_power_eninvalid type!
               vip_used       int       1
               vip_mode       int       0
               vip_dev_qty    int       2
               vip_dev0_flash_modeinvalid type!
               vip_dev0_af_pwdninvalid type!
               vip_dev1_mname string    "gc0328"
               vip_dev1_pos   string    "front"
               vip_dev1_lane  int       1
               vip_dev1_twi_idint       2
               vip_dev1_twi_addrint       66
               vip_dev1_isp_usedint       0
               vip_dev1_fmt   int       0
               vip_dev1_stby_modeint       0
               vip_dev1_vflip int       0
               vip_dev1_hflip int       0
               vip_dev1_iovdd string    "axp22_dldo3"
               vip_dev1_iovdd_volint       2800000
               vip_dev1_avdd  string    "axp22_ldoio0"
               vip_dev1_avdd_volint       2800000
               vip_dev1_dvdd  string    "axp22_eldo2"
               vip_dev1_dvdd_volint       1800000
               vip_dev1_afvdd string    ""
               vip_dev1_afvdd_volint       2800000
               vip_dev1_power_eninvalid type!
               vip_define_sensor_listint       0
               vip_dev0_mname string    "gc2035"
               vip_dev1_flash_eninvalid type!
               vip_dev1_flash_modeinvalid type!
               vip_dev1_af_pwdninvalid type!
 
    name:      ctp_para
    sub_key:   name           type      value
               ctp_int_port   gpio      (gpio: 0x25 / PB5, mul: 4, pull -1, drv -1, data -1)
               ctp_wakeup     gpio      (gpio: 0x27 / PB7, mul: 1, pull -1, drv -1, data 1)
               ctp_twi_id     int       0
               ctp_twi_addr   int       64
               ctp_screen_max_xint       1280
               ctp_screen_max_yint       800
               ctp_revert_x_flagint       0
               ctp_revert_y_flagint       1
               ctp_exchange_x_y_flagint       1
               ctp_used       int       1
               ctp_name       string    "gslX680_3670_800X1280"
               ctp_power_ldo  string    "axp22_ldoio1"
               ctp_power_ldo_volint       3000
               ctp_power_io   invalid type!
 
    name:      ctp_list_para
    sub_key:   name           type      value
               ctp_det_used   int       1
               ft5x_ts        int       0
               gt82x          int       0
               gslX680        int       0
               gslX680new     int       1
               tcm3670        int       1
               gt9xx_ts       int       0
               gt9xxf_ts      int       0
               tu_ts          int       0
               gt818_ts       int       0
               zet622x        int       0
               aw5306_ts      int       0
               icn83xx_ts     int       0
 
    name:      custom
    sub_key:   name           type      value
               ram            int       1
               system_size    int       0
               data_size      int       0
               sdcard_size    int       0
               nand_size      int       1
               use_size       int       2
 
    name:      disp_init
    sub_key:   name           type      value
               disp_init_enableint       1
               disp_mode      int       0
               screen0_output_typeint       1
               screen0_output_modeint       4
               screen1_output_typeint       1
               screen1_output_modeint       4
               fb0_format     int       10
               fb0_pixel_sequenceint       0
               fb0_scaler_mode_enableint       0
               fb0_width      int       0
               fb0_height     int       0
               fb1_format     int       10
               fb1_pixel_sequenceint       0
               fb1_scaler_mode_enableint       0
               fb1_width      int       0
               fb1_height     int       0
               lcd0_backlight int       102
               lcd1_backlight int       102
               lcd0_bright    int       50
               lcd0_contrast  int       50
               lcd0_saturationint       57
               lcd0_hue       int       50
               lcd1_bright    int       50
               lcd1_contrast  int       50
               lcd1_saturationint       57
               lcd1_hue       int       50
 
    name:      dram_dvfs_table
    sub_key:   name           type      value
               LV_count       int       3
               LV1_freq       int       552000000
               LV1_volt       int       1100
               LV2_freq       int       360000000
               LV2_volt       int       1100
               LV3_freq       int       0
               LV3_volt       int       1100
 
    name:      dram_para
    sub_key:   name           type      value
               dram_clk       int       432
               dram_type      int       3
               dram_zq        int       15291
               dram_odt_en    int       1
               dram_para1     int       284296192
               dram_para2     int       4096
               dram_mr0       int       7280
               dram_mr1       int       4
               dram_mr2       int       24
               dram_mr3       int       0
               dram_tpr0      int       4563212
               dram_tpr1      int       29499657
               dram_tpr2      int       311348
               dram_tpr3      int       0
               dram_tpr4      int       0
               dram_tpr5      int       0
               dram_tpr6      int       0
               dram_tpr7      int       0
               dram_tpr8      int       0
               dram_tpr9      int       0
               dram_tpr10     int       0
               dram_tpr11     int       0
               dram_tpr12     int       168
               dram_tpr13     int       67841
 
    name:      dram_scene_table
    sub_key:   name           type      value
               LV_count       int       3
               LV1_scene      int       1
               LV1_freq       int       360000000
               LV2_scene      int       2
               LV2_freq       int       240000000
               LV3_scene      int       3
               LV3_freq       int       168000000
 
    name:      dvfs_table
    sub_key:   name           type      value
               extremity_freq int       1344000000
               max_freq       int       1200000000
               min_freq       int       120000000
               LV_count       int       8
               LV1_freq       int       1536000000
               LV1_volt       int       1500
               LV2_freq       int       1344000000
               LV2_volt       int       1460
               LV3_freq       int       1200000000
               LV3_volt       int       1320
               LV4_freq       int       1008000000
               LV4_volt       int       1200
               LV5_freq       int       816000000
               LV5_volt       int       1100
               LV6_freq       int       648000000
               LV6_volt       int       1040
               LV7_freq       int       0
               LV7_volt       int       1040
               LV8_freq       int       0
               LV8_volt       int       1040
 
    name:      force_uart_para
    sub_key:   name           type      value
               force_uart_tx  gpio      (gpio: 0xa2 / PF2, mul: 3, pull 1, drv -1, data -1)
               force_uart_rx  gpio      (gpio: 0xa4 / PF4, mul: 3, pull 1, drv -1, data -1)
               force_uart_portint       0
 
    name:      gsensor_para
    sub_key:   name           type      value
               gsensor_int1   gpio      (gpio: 0x26 / PB6, mul: 4, pull 1, drv -1, data -1)
               gsensor_twi_id int       1
               gsensor_twi_addrint       61
               gsensor_used   int       1
               gsensor_int2   invalid type!
 
    name:      gy_para
    sub_key:   name           type      value
               gy_used        int       0
               gy_twi_id      int       1
               gy_twi_addr    int       106
               gy_int1        invalid type!
               gy_int2        invalid type!
 
    name:      i2s0
    sub_key:   name           type      value
               i2s0_bclk      gpio      (gpio: 0x24 / PB4, mul: 2, pull 1, drv -1, data -1)
               i2s0_lrclk     gpio      (gpio: 0x25 / PB5, mul: 2, pull 1, drv -1, data -1)
               i2s0_dout0     gpio      (gpio: 0x26 / PB6, mul: 2, pull 1, drv -1, data -1)
               i2s0_din       gpio      (gpio: 0x27 / PB7, mul: 2, pull 1, drv -1, data -1)
               audio_format   int       1
               signal_inversionint       1
               over_sample_rateint       512
               sample_resolutionint       16
               word_select_sizeint       32
               pcm_sync_periodint       256
               msb_lsb_first  int       0
               sign_extend    int       0
               slot_index     int       0
               slot_width     int       16
               frame_width    int       1
               tx_data_mode   int       1
               rx_data_mode   int       1
               i2s0_mclk      invalid type!
               i2s0_used      int       0
               i2s0_channel   int       2
               i2s0_master    int       4
               i2s0_dout1     invalid type!
               i2s0_dout2     invalid type!
               i2s0_dout3     invalid type!
               i2s0_select    int       1
 
    name:      i2s1
    sub_key:   name           type      value
               i2s1_bclk      gpio      (gpio: 0xcb / PG11, mul: 2, pull 1, drv -1, data -1)
               i2s1_lrclk     gpio      (gpio: 0xca / PG10, mul: 2, pull 1, drv -1, data -1)
               i2s1_dout      gpio      (gpio: 0xcc / PG12, mul: 2, pull 1, drv -1, data -1)
               i2s1_din       gpio      (gpio: 0xcd / PG13, mul: 2, pull 1, drv -1, data -1)
               audio_format   int       1
               signal_inversionint       1
               over_sample_rateint       512
               sample_resolutionint       16
               word_select_sizeint       32
               pcm_sync_periodint       64
               msb_lsb_first  int       0
               sign_extend    int       0
               slot_index     int       0
               slot_width     int       16
               frame_width    int       1
               tx_data_mode   int       0
               rx_data_mode   int       0
               i2s1_mclk      invalid type!
               i2s1_used      int       0
               i2s1_channel   int       2
               i2s1_master    int       4
               i2s1_select    int       1
 
    name:      jtag_para
    sub_key:   name           type      value
               jtag_ms        gpio      (gpio: 0xa0 / PF0, mul: 3, pull -1, drv -1, data -1)
               jtag_ck        gpio      (gpio: 0xa5 / PF5, mul: 3, pull -1, drv -1, data -1)
               jtag_do        gpio      (gpio: 0xa3 / PF3, mul: 3, pull -1, drv -1, data -1)
               jtag_di        gpio      (gpio: 0xa1 / PF1, mul: 3, pull -1, drv -1, data -1)
               jtag_enable    int       0
 
    name:      key_detect_en
    sub_key:   name           type      value
               keyen_flag     int       1
 
    name:      lcd0_para
    sub_key:   name           type      value
               lcd_bl_en      gpio      (gpio: 0xe6 / PH6, mul: 1, pull 0, drv -1, data 1)
               lcd_power      gpio      (gpio: 0x402 / GPIO2, mul: 1, pull 0, drv -1, data 1)
               lcd_gpio_0     gpio      (gpio: 0xcd / PG13, mul: 1, pull 0, drv -1, data 1)
               lcd_x          int       800
               lcd_y          int       1280
               lcd_width      int       120
               lcd_height     int       160
               lcd_dclk_freq  int       67
               lcd_pwm_used   int       1
               lcd_pwm_ch     int       0
               lcd_pwm_freq   int       50000
               lcd_pwm_pol    int       1
               lcd_hbp        int       36
               lcd_ht         int       854
               lcd_hspw       int       18
               lcd_vbp        int       12
               lcd_vt         int       1330
               lcd_vspw       int       4
               lcd_dsi_if     int       0
               lcd_dsi_lane   int       4
               lcd_dsi_format int       0
               lcd_dsi_te     int       0
               lcd_lvds_if    int       0
               lcd_lvds_colordepthint       0
               lcd_lvds_mode  int       0
               lcd_frm        int       1
               lcd_hv_clk_phaseint       0
               lcd_hv_sync_polarityint       0
               lcd_gamma_en   int       0
               lcd_bright_curve_enint       0
               lcd_cmap_en    int       0
               deu_mode       int       0
               lcdgamma4iep   int       22
               smart_color    int       90
               lcd_used       int       1
               lcd_driver_namestring    "d9401"
               lcd_power_1    string    "axp22_eldo1"
               lcd_if         int       4
 
    name:      leds_para
    sub_key:   name           type      value
               red_led        gpio      (gpio: 0x403 / GPIO3, mul: 1, pull -1, drv -1, data 0)
               green_led      gpio      (gpio: 0x401 / GPIO1, mul: 1, pull -1, drv -1, data 0)
               red_led_active_lowint       1
               leds_used      int       0
               green_led_active_lowint       0
               blue_led       invalid type!
               blue_led_active_lowint       0
 
    name:      ls_para
    sub_key:   name           type      value
               ls_int         gpio      (gpio: 0x27 / PB7, mul: 4, pull 1, drv -1, data -1)
               ls_twi_id      int       1
               ls_twi_addr    int       35
               ls_used        int       0
 
    name:      ls_list_para
    sub_key:   name           type      value
               ls_det_used    int       1
               ltr_501als     int       1
               jsa1212        int       1
 
    name:      mali_para
    sub_key:   name           type      value
               mali_used      int       1
               mali_clkdiv    int       1
               mali_extreme_freqint       408
               mali_extreme_volint       1100
 
    name:      mmc0_para
    sub_key:   name           type      value
               sdc_d1         gpio      (gpio: 0xa0 / PF0, mul: 2, pull 1, drv 2, data -1)
               sdc_d0         gpio      (gpio: 0xa1 / PF1, mul: 2, pull 1, drv 2, data -1)
               sdc_clk        gpio      (gpio: 0xa2 / PF2, mul: 2, pull 1, drv 2, data -1)
               sdc_cmd        gpio      (gpio: 0xa3 / PF3, mul: 2, pull 1, drv 2, data -1)
               sdc_d3         gpio      (gpio: 0xa4 / PF4, mul: 2, pull 0, drv 2, data -1)
               sdc_d2         gpio      (gpio: 0xa5 / PF5, mul: 2, pull 1, drv 2, data -1)
               sdc_used       int       1
               sdc_detmode    int       5
               sdc_buswidth   int       4
               sdc_power_supplystring    "axp22_dcdc1"
               sdc_use_wp     int       0
               sdc_wp         invalid type!
               sdc_isio       int       0
               sdc_regulator  string    "none"
 
    name:      mmc1_para
    sub_key:   name           type      value
               sdc_clk        gpio      (gpio: 0xc0 / PG0, mul: 2, pull 1, drv 1, data -1)
               sdc_cmd        gpio      (gpio: 0xc1 / PG1, mul: 2, pull 1, drv 1, data -1)
               sdc_d0         gpio      (gpio: 0xc2 / PG2, mul: 2, pull 1, drv 1, data -1)
               sdc_d1         gpio      (gpio: 0xc3 / PG3, mul: 2, pull 1, drv 1, data -1)
               sdc_d2         gpio      (gpio: 0xc4 / PG4, mul: 2, pull 1, drv 1, data -1)
               sdc_d3         gpio      (gpio: 0xc5 / PG5, mul: 2, pull 1, drv 1, data -1)
               sdc_used       int       1
               sdc_detmode    int       4
               sdc_buswidth   int       4
               sdc_det        invalid type!
               sdc_use_wp     int       0
               sdc_wp         invalid type!
               sdc_isio       int       1
               sdc_regulator  string    "none"
 
    name:      mmc2_para
    sub_key:   name           type      value
               sdc_clk        gpio      (gpio: 0x45 / PC5, mul: 3, pull 1, drv 2, data -1)
               sdc_cmd        gpio      (gpio: 0x46 / PC6, mul: 3, pull 1, drv 2, data -1)
               sdc_d0         gpio      (gpio: 0x48 / PC8, mul: 3, pull 1, drv 2, data -1)
               sdc_d1         gpio      (gpio: 0x49 / PC9, mul: 3, pull 1, drv 2, data -1)
               sdc_d2         gpio      (gpio: 0x4a / PC10, mul: 3, pull 1, drv 2, data -1)
               sdc_d3         gpio      (gpio: 0x4b / PC11, mul: 3, pull 1, drv 2, data -1)
               sdc_d4         gpio      (gpio: 0x4c / PC12, mul: 3, pull 1, drv 2, data -1)
               sdc_d5         gpio      (gpio: 0x4d / PC13, mul: 3, pull 1, drv 2, data -1)
               sdc_d6         gpio      (gpio: 0x4e / PC14, mul: 3, pull 1, drv 2, data -1)
               sdc_d7         gpio      (gpio: 0x4f / PC15, mul: 3, pull 1, drv 2, data -1)
               emmc_rst       gpio      (gpio: 0x50 / PC16, mul: 3, pull 1, drv 2, data -1)
               sdc_2xmode     int       1
               sdc_used       int       1
               sdc_detmode    int       3
               sdc_buswidth   int       8
               sdc_power_supplystring    "axp22_dcdc1"
               sdc_det        invalid type!
               sdc_use_wp     int       0
               sdc_wp         invalid type!
               sdc_isio       int       0
               sdc_regulator  string    "none"
 
    name:      motor_para
    sub_key:   name           type      value
               motor_shake    gpio      (gpio: 0x403 / GPIO3, mul: 1, pull -1, drv -1, data 1)
               motor_used     int       0
               motor_ldo      string    ""
               motor_ldo_voltageint       3300
 
    name:      msc_feature
    sub_key:   name           type      value
               vendor_name    string    "USB 2.0"
               product_name   string    "USB Flash Driver"
               release        int       100
               luns           int       2
 
    name:      pm_para
    sub_key:   name           type      value
               standby_mode   int       1
 
    name:      pmu1_para
    sub_key:   name           type      value
               pmu_used       int       1
               pmu_twi_addr   int       52
               pmu_twi_id     int       1
               pmu_irq_id     int       0
               pmu_battery_rdcint       100
               pmu_battery_capint       0
               pmu_batdeten   int       1
               pmu_chg_ic_tempint       0
               pmu_runtime_chgcurint       300
               pmu_earlysuspend_chgcurint       700
               pmu_suspend_chgcurint       900
               pmu_shutdown_chgcurint       900
               pmu_init_chgvolint       4200
               pmu_init_chgend_rateint       15
               pmu_init_chg_enabledint       1
               pmu_init_adc_freqint       800
               pmu_init_adcts_freqint       800
               pmu_init_chg_pretimeint       70
               pmu_init_chg_csttimeint       720
               pmu_batt_cap_correctint       1
               pmu_bat_regu_enint       0
               pmu_bat_para1  int       0
               pmu_bat_para2  int       0
               pmu_bat_para3  int       0
               pmu_bat_para4  int       0
               pmu_bat_para5  int       0
               pmu_bat_para6  int       0
               pmu_bat_para7  int       0
               pmu_bat_para8  int       0
               pmu_bat_para9  int       1
               pmu_bat_para10 int       2
               pmu_bat_para11 int       3
               pmu_bat_para12 int       5
               pmu_bat_para13 int       10
               pmu_bat_para14 int       16
               pmu_bat_para15 int       31
               pmu_bat_para16 int       43
               pmu_bat_para17 int       49
               pmu_bat_para18 int       53
               pmu_bat_para19 int       57
               pmu_bat_para20 int       60
               pmu_bat_para21 int       63
               pmu_bat_para22 int       66
               pmu_bat_para23 int       71
               pmu_bat_para24 int       77
               pmu_bat_para25 int       80
               pmu_bat_para26 int       84
               pmu_bat_para27 int       88
               pmu_bat_para28 int       92
               pmu_bat_para29 int       94
               pmu_bat_para30 int       96
               pmu_bat_para31 int       98
               pmu_bat_para32 int       100
               pmu_usbvol_limitint       0
               pmu_usbcur_limitint       1
               pmu_usbvol     int       4000
               pmu_usbcur     int       0
               pmu_usbvol_pc  int       4400
               pmu_usbcur_pc  int       500
               pmu_pwroff_vol int       3300
               pmu_pwron_vol  int       2600
               pmu_pekoff_timeint       6000
               pmu_pekoff_funcint       1
               pmu_pekoff_en  int       1
               pmu_peklong_timeint       1500
               pmu_pekon_time int       1000
               pmu_pwrok_time int       64
               pmu_battery_warning_level1int       15
               pmu_battery_warning_level2int       0
               pmu_restvol_adjust_timeint       60
               pmu_ocv_cou_adjust_timeint       60
               pmu_chgled_funcint       0
               pmu_chgled_typeint       0
               pmu_vbusen_funcint       1
               pmu_reset      int       0
               pmu_IRQ_wakeup int       1
               pmu_hot_shutdowmint       1
               pmu_inshort    int       0
               power_start    int       0
               pmu_temp_enableint       1
               pmu_charge_ltf int       2261
               pmu_charge_htf int       388
               pmu_discharge_ltfint       3200
               pmu_discharge_htfint       237
               pmu_temp_para1 int       7466
               pmu_temp_para2 int       4480
               pmu_temp_para3 int       3518
               pmu_temp_para4 int       2786
               pmu_temp_para5 int       2223
               pmu_temp 
    name:      pmu2_para
    sub_key:   name           type      value
               pmu_used       int       0
               pmu_twi_addr   int       52
               pmu_twi_id     int       1
               pmu_irq_id     int       0
 
    name:      power_sply
    sub_key:   name           type      value
               dcdc1_vol      int       3000
               dcdc2_vol      int       1100
               dcdc3_vol      int       1200
               dcdc4_vol      int       0
               dcdc5_vol      int       1500
               aldo2_vol      int       2500
               aldo3_vol      int       3000
 
    name:      product
    sub_key:   name           type      value
               version        string    "100"
               machine        string    "evb"
 
    name:      pwm0_para
    sub_key:   name           type      value
               pwm_positive   gpio      (gpio: 0xe0 / PH0, mul: 2, pull 0, drv -1, data -1)
               pwm_used       int       1
 
    name:      pwm1_para
    sub_key:   name           type      value
               pwm_positive   gpio      (gpio: 0xe1 / PH1, mul: 2, pull 0, drv -1, data -1)
               pwm_used       int       1
 
    name:      recovery_key
    sub_key:   name           type      value
               key_min        int       3
               key_max        int       5
 
    name:      s_uart0
    sub_key:   name           type      value
               s_uart_tx      gpio      (gpio: 0x162 / PL2, mul: 2, pull -1, drv -1, data -1)
               s_uart_rx      gpio      (gpio: 0x163 / PL3, mul: 2, pull -1, drv -1, data -1)
               s_uart_used    int       0
 
    name:      s_rsb0
    sub_key:   name           type      value
               s_rsb_sck      gpio      (gpio: 0x160 / PL0, mul: 2, pull 1, drv 2, data -1)
               s_rsb_sda      gpio      (gpio: 0x161 / PL1, mul: 2, pull 1, drv 2, data -1)
               s_rsb_used     int       1
 
    name:      s_jtag0
    sub_key:   name           type      value
               s_jtag_tms     gpio      (gpio: 0x164 / PL4, mul: 2, pull 1, drv 2, data -1)
               s_jtag_tck     gpio      (gpio: 0x165 / PL5, mul: 2, pull 1, drv 2, data -1)
               s_jtag_tdo     gpio      (gpio: 0x166 / PL6, mul: 2, pull 1, drv 2, data -1)
               s_jtag_tdi     gpio      (gpio: 0x167 / PL7, mul: 2, pull 1, drv 2, data -1)
               s_jtag_used    int       0
 
    name:      s_powchk
    sub_key:   name           type      value
               s_powchk_used  int       -2147483648
               s_power_reg    int       32865
               s_system_power int       50
 
    name:      spi0
    sub_key:   name           type      value
               spi_mosi       gpio      (gpio: 0x40 / PC0, mul: 3, pull -1, drv -1, data -1)
               spi_miso       gpio      (gpio: 0x41 / PC1, mul: 3, pull -1, drv -1, data -1)
               spi_sclk       gpio      (gpio: 0x42 / PC2, mul: 3, pull -1, drv -1, data -1)
               spi_cs0        gpio      (gpio: 0x43 / PC3, mul: 3, pull 1, drv -1, data -1)
               spi_used       int       0
               spi_cs_bitmap  int       1
 
    name:      spi1
    sub_key:   name           type      value
               spi_cs0        gpio      (gpio: 0x0 / PA0, mul: 2, pull 1, drv -1, data -1)
               spi_sclk       gpio      (gpio: 0x1 / PA1, mul: 2, pull -1, drv -1, data -1)
               spi_mosi       gpio      (gpio: 0x2 / PA2, mul: 2, pull -1, drv -1, data -1)
               spi_miso       gpio      (gpio: 0x3 / PA3, mul: 2, pull -1, drv -1, data -1)
               spi_used       int       0
               spi_cs_bitmap  int       1
 
    name:      spi_board0
    sub_key:   name           type      value
               modalias       string    "at25df641"
               max_speed_hz   int       50000000
               bus_num        int       0
               chip_select    int       0
               mode           int       0
 
    name:      spi_devices
    sub_key:   name           type      value
               spi_dev_num    int       0
 
    name:      target
    sub_key:   name           type      value
               boot_clock     int       1008
               storage_type   int       2
               burn_key       int       1
 
    name:      ths_para
    sub_key:   name           type      value
               ths_used       int       1
               ths_trip1_countint       3
               ths_trip1_0    int       75
               ths_trip1_1    int       90
               ths_trip1_2    int       110
               ths_trip1_0_minint       0
               ths_trip1_0_maxint       1
               ths_trip1_1_minint       1
               ths_trip1_1_maxint       3
               ths_trip1_2_minint       0
               ths_trip1_2_maxint       0
 
    name:      tkey_para
    sub_key:   name           type      value
               tkey_used      int       0
               tkey_twi_id    invalid type!
               tkey_twi_addr  invalid type!
               tkey_int       invalid type!
 
    name:      twi_para
    sub_key:   name           type      value
               twi_scl        gpio      (gpio: 0xe2 / PH2, mul: 2, pull -1, drv -1, data -1)
               twi_sda        gpio      (gpio: 0xe3 / PH3, mul: 2, pull -1, drv -1, data -1)
               twi_port       int       0
 
    name:      twi0
    sub_key:   name           type      value
               twi_scl        gpio      (gpio: 0xe2 / PH2, mul: 2, pull -1, drv -1, data -1)
               twi_sda        gpio      (gpio: 0xe3 / PH3, mul: 2, pull -1, drv -1, data -1)
               twi_used       int       1
 
    name:      twi1
    sub_key:   name           type      value
               twi_scl        gpio      (gpio: 0xe4 / PH4, mul: 2, pull -1, drv -1, data -1)
               twi_sda        gpio      (gpio: 0xe5 / PH5, mul: 2, pull -1, drv -1, data -1)
               twi_used       int       1
 
    name:      twi2
    sub_key:   name           type      value
               twi_scl        gpio      (gpio: 0x8c / PE12, mul: 3, pull -1, drv -1, data -1)
               twi_sda        gpio      (gpio: 0x8d / PE13, mul: 3, pull -1, drv -1, data -1)
               twi_used       int       1
 
    name:      uart_para
    sub_key:   name           type      value
               uart_debug_tx  gpio      (gpio: 0xa2 / PF2, mul: 3, pull 1, drv -1, data -1)
               uart_debug_rx  gpio      (gpio: 0xa4 / PF4, mul: 3, pull 1, drv -1, data -1)
               uart_debug_portint       0
 
    name:      uart0
    sub_key:   name           type      value
               uart_tx        gpio      (gpio: 0xa2 / PF2, mul: 3, pull 1, drv -1, data -1)
               uart_rx        gpio      (gpio: 0xa4 / PF4, mul: 3, pull 1, drv -1, data -1)
               uart_type      int       2
               uart_used      int       1
               uart_port      int       0
 
    name:      uart1
    sub_key:   name           type      value
               uart_tx        gpio      (gpio: 0xc6 / PG6, mul: 2, pull 1, drv -1, data -1)
               uart_rx        gpio      (gpio: 0xc7 / PG7, mul: 2, pull 1, drv -1, data -1)
               uart_rts       gpio      (gpio: 0xc8 / PG8, mul: 2, pull 1, drv -1, data -1)
               uart_cts       gpio      (gpio: 0xc9 / PG9, mul: 2, pull 1, drv -1, data -1)
               uart_used      int       1
               uart_type      int       4
 
    name:      uart2
    sub_key:   name           type      value
               uart_tx        gpio      (gpio: 0x20 / PB0, mul: 2, pull 1, drv -1, data -1)
               uart_rx        gpio      (gpio: 0x21 / PB1, mul: 2, pull 1, drv -1, data -1)
               uart_rts       gpio      (gpio: 0x22 / PB2, mul: 2, pull 1, drv -1, data -1)
               uart_cts       gpio      (gpio: 0x23 / PB3, mul: 2, pull 1, drv -1, data -1)
               uart_used      int       0
               uart_type      int       4
 
    name:      uart3
    sub_key:   name           type      value
               uart_tx        gpio      (gpio: 0xe6 / PH6, mul: 3, pull 1, drv -1, data -1)
               uart_rx        gpio      (gpio: 0xe7 / PH7, mul: 3, pull 1, drv -1, data -1)
               uart_rts       gpio      (gpio: 0xe8 / PH8, mul: 3, pull 1, drv -1, data -1)
               uart_cts       gpio      (gpio: 0xe9 / PH9, mul: 3, pull 1, drv -1, data -1)
               uart_used      int       0
               uart_type      int       4
 
    name:      uart4
    sub_key:   name           type      value
               uart_tx        gpio      (gpio: 0x4 / PA4, mul: 2, pull 1, drv -1, data -1)
               uart_rx        gpio      (gpio: 0x5 / PA5, mul: 2, pull 1, drv -1, data -1)
               uart_rts       gpio      (gpio: 0x6 / PA6, mul: 2, pull 1, drv -1, data -1)
               uart_cts       gpio      (gpio: 0x7 / PA7, mul: 2, pull 1, drv -1, data -1)
               uart_port      int       4
               uart_type      int       2
               uart_used      int       0
 
    name:      usbc0
    sub_key:   name           type      value
               usb_id_gpio    gpio      (gpio: 0xe8 / PH8, mul: 0, pull 1, drv -1, data -1)
               usb_drv_vbus_gpiogpio      (gpio: 0x404 / GPIO4, mul: 1, pull 0, drv -1, data 0)
               usb_detect_typeint       1
               usb_used       int       1
               usb_det_vbus_gpiostring    "axp_ctrl"
               usb_port_type  int       2
               usb_restrict_gpioinvalid type!
               usb_host_init_stateint       0
               usb_restric_flagint       0
               usb_restric_voltageint       3550000
               usb_restric_capacityint       5
               usb_regulator_iostring    "nocare"
               usb_regulator_volint       0
               usb_regulator_id_vbusstring    "axp22_dcdc1"
               usb_regulator_id_vbus_volint       3300000
 
    name:      usbc1
    sub_key:   name           type      value
               usb_used       int       1
               usb_drv_vbus_gpioinvalid type!
               usb_restrict_gpioinvalid type!
               usb_host_init_stateint       0
               usb_restric_flagint       0
               usb_regulator_iostring    "nocare"
               usb_regulator_volint       0
               usb_not_suspendint       0
 
    name:      usb_feature
    sub_key:   name           type      value
               vendor_id      int       7994
               mass_storage_idint       4096
               adb_id         int       4097
               manufacturer_namestring    "USB Developer"
               product_name   string    "Android"
               serial_number  string    "20080411"
 
    name:      Vdevice
    sub_key:   name           type      value
               Vdevice_0      gpio      (gpio: 0x1 / PA1, mul: 5, pull 1, drv 2, data -1)
               Vdevice_1      gpio      (gpio: 0x2 / PA2, mul: 5, pull 1, drv 2, data -1)
               Vdevice_used   int       1
 
    name:      wakeup_src_para
    sub_key:   name           type      value
               wakeup_src_wl  gpio      (gpio: 0x167 / PL7, mul: 4, pull -1, drv -1, data 0)
               wakeup_src_bt  gpio      (gpio: 0x169 / PL9, mul: 4, pull -1, drv -1, data 0)
               pll_ratio      int       273
               dram_selfresh_enint       1
               dram_freq      int       36
               cpu_en         int       0
               cpu_freq       int       48
 
    name:      wifi_para
    sub_key:   name           type      value
               rtl8723bs_wl_regongpio      (gpio: 0x166 / PL6, mul: 1, pull -1, drv -1, data 0)
               rtl8723bs_wl_host_wakegpio      (gpio: 0x167 / PL7, mul: 4, pull -1, drv -1, data 0)
               rtl8723bs_bt_regongpio      (gpio: 0x168 / PL8, mul: 1, pull -1, drv -1, data 0)
               rtl8723bs_bt_wakegpio      (gpio: 0x16a / PL10, mul: 1, pull -1, drv -1, data 0)
               rtl8723bs_bt_host_wakegpio      (gpio: 0x169 / PL9, mul: 4, pull -1, drv -1, data 0)
               rtl8723cs_chip_engpio      (gpio: 0x16a / PL10, mul: 1, pull -1, drv -1, data 0)
               rtl8723cs_wl_regongpio      (gpio: 0x16b / PL11, mul: 1, pull -1, drv -1, data 0)
               rtl8723cs_bt_regongpio      (gpio: 0x168 / PL8, mul: 1, pull -1, drv -1, data 0)
               wifi_power_switchinvalid type!
               wifi_used      int       1
               wifi_sdc_id    int       1
               wifi_usbc_id   int       1
               wifi_usbc_type int       1
               wifi_mod_sel   int       9
               rtl8723bs_lpo_use_apclkint       0
               wifi_power     string    "axp22_dldo1"
               wifi_power_ext1string    "axp22_dldo2"
               wifi_power_ext2string    ""
               rtl8723cs_lpo_use_apclkint       0