Inhaltsverzeichnis
iRULU X11 V1.2
- 1x Allwinner A33 Quad Core
- 2x Micron PE028 6HP77 D9SGR 125 (can not read) (RAM)
- 1x SK hynix H26M52002CKR (e-NAND)
- 1x AXP223
- 1x Silead GSL3676
- 1x Realtek 8723CS
PCB
PHT_V108_V1.2_0901 160901
adb shell
cpuinfo
root@iRULU-X11:/ # cat /proc/cpuinfo Processor : ARMv7 Processor rev 5 (v7l) processor : 0 BogoMIPS : 2285.71 Features : swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x0 CPU part : 0xc07 CPU revision : 5 Hardware : sun8i Revision : 0000 Serial : 03549ab7690500000000
cpufreq
root@iRULU-X11:/ # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_min_freq 480000 root@iRULU-X11:/ # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq 1344000 root@iRULU-X11:/ # cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver cpufreq-sunxi
uname
root@iRULU-X11:/ # busybox uname -a Linux localhost 3.4.39 #1 SMP PREEMPT Sat Oct 22 19:30:25 CST 2016 armv7l GNU/Linux
partitions
root@iRULU-X11:/ # cat /proc/partitions
major minor #blocks name
253 0 131072 zram0
179 0 15523840 mmcblk0
179 1 12374016 mmcblk0p1
179 2 32768 mmcblk0p2
179 3 1 mmcblk0p3
179 5 16384 mmcblk0p5
179 6 16384 mmcblk0p6
179 7 2097152 mmcblk0p7
179 8 16384 mmcblk0p8
179 9 32768 mmcblk0p9
179 10 786432 mmcblk0p10
179 11 16384 mmcblk0p11
179 12 16384 mmcblk0p12
179 13 81920 mmcblk0p13
179 32 2048 mmcblk0boot1
179 16 2048 mmcblk0boot0
root@iRULU-X11:/ # ll /dev/block/by-name/
lrwxrwxrwx root root 2017-04-20 16:01 UDISK -> /dev/block/mmcblk0p1
lrwxrwxrwx root root 2017-04-20 16:01 alog -> /dev/block/mmcblk0p13
lrwxrwxrwx root root 2017-04-20 16:01 boot -> /dev/block/mmcblk0p6
lrwxrwxrwx root root 2017-04-20 16:01 bootloader -> /dev/block/mmcblk0p2
lrwxrwxrwx root root 2017-04-20 16:01 cache -> /dev/block/mmcblk0p10
lrwxrwxrwx root root 2017-04-20 16:01 env -> /dev/block/mmcblk0p5
lrwxrwxrwx root root 2017-04-20 16:01 metadata -> /dev/block/mmcblk0p11
lrwxrwxrwx root root 2017-04-20 16:01 misc -> /dev/block/mmcblk0p8
lrwxrwxrwx root root 2017-04-20 16:01 private -> /dev/block/mmcblk0p12
lrwxrwxrwx root root 2017-04-20 16:01 recovery -> /dev/block/mmcblk0p9
lrwxrwxrwx root root 2017-04-20 16:01 system -> /dev/block/mmcblk0p7
root@iRULU-X11:/ # busybox fdisk -l -u /dev/block/mmcblk0
Disk /dev/block/mmcblk0: 15.8 GB, 15896412160 bytes
1 heads, 16 sectors/track, 1940480 cylinders, total 31047680 sectors
Units = sectors of 1 * 512 = 512 bytes
Device Boot Start End Blocks Id System
/dev/block/mmcblk0p1 * 6299648 31145983 12423168 b Win95 FAT32
Partition 1 does not end on cylinder boundary
/dev/block/mmcblk0p2 73728 139263 32768 6 FAT16
Partition 2 does not end on cylinder boundary
/dev/block/mmcblk0p3 1 6160384 3080192 5 Extended
Partition 3 does not end on cylinder boundary
/dev/block/mmcblk0p5 139264 172031 16384 83 Linux
/dev/block/mmcblk0p6 172032 204799 16384 83 Linux
/dev/block/mmcblk0p7 204800 4399103 2097152 83 Linux
/dev/block/mmcblk0p8 4399104 4431871 16384 83 Linux
/dev/block/mmcblk0p9 4431872 4497407 32768 83 Linux
/dev/block/mmcblk0p10 4497408 6070271 786432 83 Linux
/dev/block/mmcblk0p11 6070272 6103039 16384 83 Linux
/dev/block/mmcblk0p12 6103040 6135807 16384 83 Linux
/dev/block/mmcblk0p13 6135808 6299647 81920 83 Linux
Partition table entries are not in disk order
lsmod
root@iRULU-X11:/ # lsmod 8723cs 1382816 0 - Live 0x00000000 rtl_bluesleep 3828 0 - Live 0x00000000 cdc_ether 5099 0 - Live 0x00000000 rtl8150 9023 0 - Live 0x00000000 mcs7830 6292 0 - Live 0x00000000 qf9700 7805 0 - Live 0x00000000 asix 17150 0 - Live 0x00000000 usbnet 17700 4 cdc_ether,mcs7830,qf9700,asix, Live 0x00000000 vfe_v4l2 680270 0 - Live 0x00000000 gc2155 13100 0 - Live 0x00000000 gc2035 13600 0 - Live 0x00000000 gc0312 9752 0 - Live 0x00000000 gc2145 13201 0 - Live 0x00000000 gc0328 10679 0 - Live 0x00000000 vfe_subdev 4695 6 vfe_v4l2,gc2155,gc2035,gc0312,gc2145,gc0328, Live 0x00000000 vfe_os 4113 2 vfe_v4l2,vfe_subdev, Live 0x00000000 cci 21858 7 gc2155,gc2035,gc0312,gc2145,gc0328, Live 0x00000000 videobuf_dma_contig 5567 1 vfe_v4l2, Live 0x00000000 videobuf_core 16528 2 vfe_v4l2,videobuf_dma_contig, Live 0x00000000 mir3da 30078 0 - Live 0x00000000 gslX680new 499989 0 - Live 0x00000000 (F) sw_device 14680 0 - Live 0x00000000 sunxi_keyboard 3293 0 - Live 0x00000000 sunxi_schw 13015 0 - Live 0x00000000 (O) mali 209944 30 - Live 0x00000000 (O) lcd 31164 0 - Live 0x00000000 disp 987711 7 lcd, Live 0x00000000 nand 282774 0 - Live 0x00000000 (O)
build.prop
ro.build.id=LMY47V ro.build.display.id=LMY47V.20150918 ro.build.version.incremental=20161023 ro.build.version.sdk=22 ro.build.version.codename=REL ro.build.version.all_codenames=REL ro.build.version.release=5.1.1 ro.build.date=2016年 10月 23日 星期日 10:58:53 CST ro.build.date.utc=1477191533 ro.build.type=user ro.build.user=eng06 ro.build.host=phtaa-To-be-filled-by-O-E-M ro.build.tags=test-keys ro.build.flavor=iRULU_X11-user ro.product.model=iRULU X11 ro.product.brand=iRULU ro.product.name=iRULU_X11 ro.product.device=iRULU-X11 ro.product.board=exdroid ro.product.cpu.abi=armeabi-v7a ro.product.cpu.abi2=armeabi ro.product.cpu.abilist=armeabi-v7a,armeabi ro.product.cpu.abilist32=armeabi-v7a,armeabi ro.product.cpu.abilist64= ro.product.manufacturer=iRulu ...
dmesg
<6>[ 0.000000] Booting Linux on physical CPU 0
<6>[ 0.000000] Initializing cgroup subsys cpuset
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 3.4.39 (eng06@phtaa-To-be-filled-by-O-E-M) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #1 SMP PREEMPT Sat Oct 22 19:30:25 CST 2016
<4>[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
<4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: sun8i
<6>[ 0.000000] Initialized persistent memory from 43080800-430907ff
<6>[ 0.000000] cma: CMA: reserved 256 MiB at 70000000
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
<7>[ 0.000000] On node 0 totalpages: 262144
<7>[ 0.000000] free_area_init_node: node 0, pgdat c09ae880, node_mem_map c139e000
<7>[ 0.000000] Normal zone: 1710 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 192850 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 594 pages used for memmap
<7>[ 0.000000] HighMem zone: 66990 pages, LIFO batch:15
<4>[ 0.000000] script_init enter!
<4>[ 0.000000] script_init exit!
<6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1cb7000 s10752 r8192 d13824 u32768
<7>[ 0.000000] pcpu-alloc: s10752 r8192 d13824 u32768 alloc=8*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840
<5>[ 0.000000] Kernel command line: boot_type=2 disp_para=100 fb_base=0x0 config_size=41448 androidboot.serialno=03549ab7690500000000 androidboot.hardware=sun8i console=ttyS0,115200 root=/dev/mmcblk0p7 init=/init ion_cma_list=120m,256m loglevel=4 partitions=bootloader@mmcblk0p2:env@mmcblk0p5:boot@mmcblk0p6:system@mmcblk0p7:misc@mmcblk0p8:recovery@mmcblk0p9:cache@mmcblk0p10:metadata@mmcblk0p11:private@mmcblk0p12:alog@mmcblk0p13:UDISK@mmcblk0p1
<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Memory: 1024MB = 1024MB total
<5>[ 0.000000] Memory: 760824k/760824k available, 287752k reserved, 8192K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .text : 0xc0008000 - 0xc08efa3c (9119 kB)
<5>[ 0.000000] .init : 0xc08f0000 - 0xc0942a00 ( 331 kB)
<5>[ 0.000000] .data : 0xc0944000 - 0xc09c2278 ( 505 kB)
<5>[ 0.000000] .bss : 0xc09c229c - 0xc0b49988 (1566 kB)
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] NR_IRQS:416
<6>[ 0.000000] Architected local timer running at 24.00MHz.
<6>[ 0.000000] Switching to timer-based delay loop
<6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<6>[ 0.000000] Console: colour dummy device 80x30
<6>[ 0.000285] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
<6>[ 0.000313] pid_max: default: 32768 minimum: 301
<6>[ 0.000539] Security Framework initialized
<6>[ 0.000609] SELinux: Initializing.
<7>[ 0.000682] SELinux: Starting in permissive mode
<6>[ 0.000698] AppArmor: AppArmor disabled by boot time parameter
<6>[ 0.000808] Mount-cache hash table entries: 512
<6>[ 0.002062] Initializing cgroup subsys debug
<6>[ 0.002084] Initializing cgroup subsys cpuacct
<6>[ 0.002096] Initializing cgroup subsys freezer
<6>[ 0.002143] CPU: Testing write buffer coherency: ok
<6>[ 0.002200] ftrace: allocating 23631 entries in 70 pages
<6>[ 0.030433] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[ 0.030459] [sunxi_smp_prepare_cpus] enter
<6>[ 0.030521] Setting up static identity map for 0x4063c988 - 0x4063c9e0
<4>[ 0.010000] CPU1: Booted secondary processor
<6>[ 0.010000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<4>[ 0.010000] CPU2: Booted secondary processor
<6>[ 0.010000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
<4>[ 0.010000] CPU3: Booted secondary processor
<6>[ 0.010000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
<6>[ 0.210197] Brought up 4 CPUs
<6>[ 0.210197] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
<6>[ 0.210497] devtmpfs: initialized
<6>[ 0.220879] pinctrl core: initialized pinctrl subsystem
<6>[ 0.233862] NET: Registered protocol family 16
<6>[ 0.253743] DMA: preallocated 2048 KiB pool for atomic coherent allocations
<6>[ 0.253842] script_sysfs_init success
<7>[ 0.253880] sunxi_dump_init success
<6>[ 0.255084] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
<6>[ 0.256576] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
<6>[ 0.257038] gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl
<6>[ 0.258220] persistent_ram: found existing buffer, size 5172, start 5172
<6>[ 0.281382] console [ram-1] enabled
<4>[ 0.282276] [sunxi-module]: [sunxi-module.0] probe success
<6>[ 0.282332] script config pll3 to 297 Mhz
<6>[ 0.282350] script config pll4 to 300 Mhz
<6>[ 0.282393] script config pll6 to 600 Mhz
<6>[ 0.282407] script config pll8 to 384 Mhz
<6>[ 0.282430] script config pll9 to 480 Mhz
<6>[ 0.282444] script config pll10 to 234 Mhz
<4>[ 0.282720] sunxi_default_clk_init
<4>[ 0.282728] try to set pll6ahb1 to 200000000
<4>[ 0.282782] try to set ahb clk source to pll6ahb1
<4>[ 0.282792] set ahb clk source to pll6ahb1
<4>[ 0.282805] try to set ahb1 to 200000000
<4>[ 0.282816] try to set apb1 to 100000000
<4>[ 0.283525] ===fe3o4==== sunxi_root_procfs_attach ret:0
<6>[ 0.290505] bio: create slab <bio-0> at 0
<5>[ 0.290561] [ARISC] :sunxi-arisc driver v1.60
<5>[ 0.302860] [ARISC] :arisc version: [v0.1.11]
<4>[ 0.302894] [sunxi-module]: arisc register success
<5>[ 0.309442] [ARISC] :sunxi-arisc driver v1.60 startup succeeded
<5>[ 0.311132] SCSI subsystem initialized
<6>[ 0.311132] usbcore: registered new interface driver usbfs
<6>[ 0.311132] usbcore: registered new interface driver hub
<6>[ 0.311132] usbcore: registered new device driver usb
<4>[ 0.311132] twi_chan_cfg()335 - [twi0] has no twi_regulator.
<4>[ 0.311132] twi_chan_cfg()335 - [twi1] has no twi_regulator.
<4>[ 0.311132] twi_chan_cfg()335 - [twi2] has no twi_regulator.
<6>[ 0.311341] Linux video capture interface: v2.00
<4>[ 0.321215] current_limit = 500000
<6>[ 0.330283] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[ 0.330950] Bluetooth: Core ver 2.16
<6>[ 0.331029] NET: Registered protocol family 31
<6>[ 0.331042] Bluetooth: HCI device and connection manager initialized
<6>[ 0.331059] Bluetooth: HCI socket layer initialized
<6>[ 0.331072] Bluetooth: L2CAP socket layer initialized
<6>[ 0.331105] Bluetooth: SCO socket layer initialized
<6>[ 0.331397] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 0.331488] Switching to clocksource arch_sys_counter
<5>[ 0.354722] FS-Cache: Loaded
<6>[ 0.355166] CacheFiles: Loaded
<6>[ 0.368376] NET: Registered protocol family 2
<6>[ 0.368728] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.369599] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[ 0.371575] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>[ 0.372504] TCP: Hash tables configured (established 131072 bind 65536)
<6>[ 0.372517] TCP: reno registered
<6>[ 0.372532] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.372574] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.372974] NET: Registered protocol family 1
<6>[ 0.373519] RPC: Registered named UNIX socket transport module.
<6>[ 0.373532] RPC: Registered udp transport module.
<6>[ 0.373542] RPC: Registered tcp transport module.
<6>[ 0.373552] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 0.373866] Unpacking initramfs...
<6>[ 0.643620] Freeing initrd memory: 3700K
<4>[ 0.644123] [pm]aw_pm_init!
<6>[ 0.644139] standby_mode = 1.
<6>[ 0.644148] wakeup src cnt is : 2.
<4>[ 0.644161] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
<4>[ 0.644174] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x80
<4>[ 0.644187] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
<4>[ 0.644200] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
<4>[ 0.644212] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x280
<4>[ 0.644224] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x0
<6>[ 0.644292] sunxi_reg_init enter
<6>[ 0.645547] audit: initializing netlink socket (disabled)
<5>[ 0.645623] type=2000 audit(0.640:1): initialized
<4>[ 0.650457] highmem bounce pool size: 64 pages
<6>[ 0.652872] NTFS driver 2.1.30 [Flags: R/W].
<6>[ 0.653103] fuse init (API version 7.18)
<6>[ 0.653700] msgmni has been set to 1477
<7>[ 0.653759] SELinux: Registering netfilter hooks
<6>[ 0.656225] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>[ 0.656248] io scheduler noop registered
<6>[ 0.656260] io scheduler deadline registered
<6>[ 0.656370] io scheduler cfq registered (default)
<6>[ 0.656897] pwm module init!
<4>[ 0.657564] sw_uart_get_devinfo()1503 - uart1 has no uart_regulator.
<4>[ 0.657582] sw_uart_get_devinfo()1503 - uart2 has no uart_regulator.
<6>[ 0.658152] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
<6>[ 0.658557] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
<6>[ 0.664095] loop: module loaded
<4>[ 0.664345] [rf_pm]: select module num is 10
<4>[ 0.664357] [rf_pm]: module power1 name axp22_dldo1
<4>[ 0.664368] [rf_pm]: module power1 vol 3300000
<4>[ 0.664379] [rf_pm]: module power2 name
<4>[ 0.664388] [rf_pm]: failed to fetch module_power2_vol
<4>[ 0.664399] [rf_pm]: module power3 name
<4>[ 0.664408] [rf_pm]: failed to fetch module_power3_vol
<4>[ 0.664465] [rf_pm]: set gpio GPIO0 mulsel failed.
<4>[ 0.664476] [rf_pm]: mod has no chip_en gpio
<4>[ 0.664485] [rf_pm]: lpo_use_apclk:
<4>[ 0.664577] [rf_pm]: get power regulator failed.
<4>[ 0.664589] [rf_pm]: set axp22_dldo1 to 3300000 v
<4>[ 0.664749] [rf_pm]: enable axp22_dldo1.
<4>[ 0.665313] [rf_pm]: mod info power switch 1024
<6>[ 0.665465] scene_lock_init name=rf_pm
<4>[ 0.665738] [wifi_pm]: wifi gpio init is OK !!
<4>[ 0.665820] [rfkill]: mod has no ls_int gpio
<4>[ 0.665832] [rfkill]: mod has no pcm_ch gpio
<4>[ 0.666124] [rfkill]: rfkill set power 0
<4>[ 0.680303] sunxi_spi_chan_cfg()1355 - [spi-0] has no spi_regulator.
<6>[ 0.680352] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.680362] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 0.680625] PPP generic driver version 2.4.2
<6>[ 0.680841] PPP BSD Compression module registered
<6>[ 0.680854] PPP Deflate Compression module registered
<6>[ 0.681901] PPP MPPE Compression module registered
<6>[ 0.681924] NET: Registered protocol family 24
<6>[ 0.681985] PPTP driver version 0.8.5
<6>[ 0.682314] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.702485] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.702534] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
<6>[ 0.703896] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
<6>[ 0.720057] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
<6>[ 0.720899] hub 1-0:1.0: USB hub found
<6>[ 0.720931] hub 1-0:1.0: 1 port detected
<6>[ 0.721386] sunxi-ehci sunxi-ehci.1: remove, state 1
<6>[ 0.721412] usb usb1: USB disconnect, device number 1
<6>[ 0.722987] sunxi-ehci sunxi-ehci.1: USB bus 1 deregistered
<6>[ 0.733094] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 0.733308] usbcore: registered new interface driver cdc_acm
<6>[ 0.733320] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[ 0.733332] Initializing USB Mass Storage driver...
<6>[ 0.733399] usbcore: registered new interface driver usb-storage
<6>[ 0.733410] USB Mass Storage support registered.
<6>[ 0.733452] usbcore: registered new interface driver ums-alauda
<6>[ 0.733495] usbcore: registered new interface driver ums-cypress
<6>[ 0.733538] usbcore: registered new interface driver ums-datafab
<6>[ 0.733580] usbcore: registered new interface driver ums_eneub6250
<6>[ 0.733624] usbcore: registered new interface driver ums-freecom
<6>[ 0.733669] usbcore: registered new interface driver ums-isd200
<6>[ 0.733712] usbcore: registered new interface driver ums-jumpshot
<6>[ 0.733755] usbcore: registered new interface driver ums-karma
<6>[ 0.733799] usbcore: registered new interface driver ums-onetouch
<6>[ 0.733858] usbcore: registered new interface driver ums-realtek
<6>[ 0.733904] usbcore: registered new interface driver ums-sddr09
<6>[ 0.733947] usbcore: registered new interface driver ums-sddr55
<6>[ 0.733991] usbcore: registered new interface driver ums-usbat
<6>[ 0.734129] usbcore: registered new interface driver usbserial
<6>[ 0.734143] usbserial: USB Serial Driver core
<6>[ 0.734196] usbcore: registered new interface driver option
<6>[ 0.734241] USB Serial support registered for GSM modem (1-port)
<6>[ 0.734612] file system registered
<6>[ 0.736542] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 0.736557] android_usb gadget: Number of LUNs=2
<6>[ 0.736571] lun0: LUN: removable file: (no medium)
<6>[ 0.736582] lun1: LUN: removable file: (no medium)
<4>[ 0.736964] get usb_serial_number success from boot command line
<6>[ 0.736991] android_usb gadget: android_usb ready
<3>[ 0.737460] WRN:L486(drivers/usb/sunxi_usb/hcd/hcd0/sunxi_hcd0.c):get no_suspend status failed
<6>[ 0.737881] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
<6>[ 0.737900] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 1
<6>[ 0.738615] hub 1-0:1.0: USB hub found
<6>[ 0.738641] hub 1-0:1.0: 1 port detected
<6>[ 0.739647] mousedev: PS/2 mouse device common for all mice
<6>[ 0.740697] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
<4>[ 0.740864] sunxi cedar version 0.1
<4>[ 0.740926] [cedar]: install start!!!
<4>[ 0.741176] [cedar]: install end!!!
<4>[ 0.744373] axp22_dcdc1: Failed to create debugfs directory
<6>[ 0.746119] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
<6>[ 0.746199] Bluetooth: HCI UART driver ver 2.2
<6>[ 0.746213] Bluetooth: HCI H4 protocol initialized
<6>[ 0.746224] Bluetooth: HCI Realtek H5 protocol initialized
<4>[ 0.746690] axp22_dcdc3: Failed to create debugfs directory
<4>[ 0.749160] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.85 2014-08-01 15:11) Compiled in Oct 22 2016 at 19:28:14
<4>[ 0.749176] [mmc]: sunxi_mci_init
<4>[ 0.749206] [mmc]: get mmc0's power supply 'axp22_dcdc1' ok
<4>[ 0.749215] [mmc]: get mmc0's 2xmode fail
<4>[ 0.749223] [mmc]: get mmc0's ddrmode fail
<4>[ 0.749232] [mmc]: get mmc0's sdc_ex_dly_used failed, use default dly
<4>[ 0.749252] [mmc]: get mmc1's sdc_power failed
<4>[ 0.749260] [mmc]: get mmc1's 2xmode fail
<4>[ 0.749268] [mmc]: get mmc1's ddrmode fail
<4>[ 0.749276] [mmc]: get mmc1's sdc_ex_dly_used failed, use default dly
<4>[ 0.749301] [mmc]: get mmc2's power supply 'axp22_dcdc1' ok
<4>[ 0.749311] [mmc]: get mmc2's 2xmode ok, val = 1
<4>[ 0.749321] [mmc]: get mmc2's ddrmode fail
<4>[ 0.749329] [mmc]: mmc2's not use sdc_ex_dly, use default dly
<4>[ 0.749340] [mmc]: MMC host used card: 0x7, boot card: 0x4, io_card 2
<4>[ 0.751023] [mmc]: mmc not poweroff notifiy
<4>[ 0.751042] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 0.752142] [mmc]: sdc2 Probe: base:0xf1c11000 irq:94 sg_cpu:f002e000(70200000) ret 0.
<4>[ 0.752164] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 0.752819] [mmc]: mmc not poweroff notifiy
<4>[ 0.752832] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 0.753708] [mmc]: sdc2 card_power_on start...
<4>[ 0.753746] axp22_dcdc1: Failed to create debugfs directory
<4>[ 0.753835] [mmc]: sdc2 card_power_on end ...ok
<4>[ 0.753844] [mmc]: sdc2 card_power_on ok
<4>[ 0.753934] [mmc]: sdc0 Probe: base:0xf1c0f000 irq:92 sg_cpu:f0030000(70201000) ret 0.
<4>[ 0.753945] [mmc]: sdc0: no card detected, try to shutdown io voltage.
<4>[ 0.756234] [mmc]: mmc not poweroff notifiy
<4>[ 0.756247] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 0.757342] [mmc]: sdc1 Probe: base:0xf1c10000 irq:93 sg_cpu:f0032000(70202000) ret 0.
<4>[ 0.757353] [mmc]: sdc1: no card detected, try to shutdown io voltage.
<6>[ 0.759999] usbcore: registered new interface driver usbhid
<6>[ 0.760050] usbhid: USB HID core driver
<6>[ 0.760064] zram: num_devices not specified. Using default: 1
<6>[ 0.760072] zram: Creating 1 devices ...
<6>[ 0.761379] ashmem: initialized
<6>[ 0.761521] logger: created 256K log 'log_main'
<6>[ 0.761653] logger: created 256K log 'log_events'
<6>[ 0.761778] logger: created 256K log 'log_radio'
<6>[ 0.761908] logger: created 256K log 'log_system'
<6>[ 0.762188] Linux telephony interface: v1.00
<3>[ 0.762343] sunxi_oops: heming add OOPS_INFO_ADDR = -20
<3>[ 0.763968] [audiocodec] : aif2 not used!
<3>[ 0.764069] [audiocodec] : aif3 not used!
<6>[ 0.769131] asoc: sndcodec <-> sunxi-codec mapping ok
<4>[ 0.770074] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 0.770184] [mmc]: mclk 0xf1c20090 0xc001000e
<3>[ 0.771140] [I2S0]sunxi-i2s0 cannot find any using configuration for controllers, return directly!
<3>[ 0.771562] [I2S]sndi2s0 cannot find any using configuration for controllers, return directly!
<4>[ 0.771744] [I2S0] driver not init,just return.
<3>[ 0.771759] [I2S1]sunxi-i2s1 cannot find any using configuration for controllers, return directly!
<3>[ 0.772124] [I2S]sndi2s1 cannot find any using configuration for controllers, return directly!
<4>[ 0.772305] I2S1 driver not init,just return.
<6>[ 0.772551] u32 classifier
<6>[ 0.772559] Actions configured
<6>[ 0.772570] Netfilter messages via NETLINK v0.30.
<6>[ 0.772680] nf_conntrack version 0.5.0 (16041 buckets, 64164 max)
<6>[ 0.773231] ctnetlink v0.93: registering with nfnetlink.
<6>[ 0.773310] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 0.773320] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 0.773834] xt_time: kernel timezone is -0000
<6>[ 0.774020] IPv4 over IPv4 tunneling driver
<6>[ 0.774553] gre: GRE over IPv4 demultiplexor driver
<6>[ 0.774566] ip_gre: GRE over IPv4 tunneling driver
<6>[ 0.775285] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.775504] arp_tables: (C) 2002 David S. Miller
<6>[ 0.775591] TCP: cubic registered
<6>[ 0.775601] Initializing XFRM netlink socket
<6>[ 0.775962] NET: Registered protocol family 10
<6>[ 0.777260] Mobile IPv6
<6>[ 0.777304] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.777511] IPv6 over IPv4 tunneling driver
<6>[ 0.778686] NET: Registered protocol family 17
<6>[ 0.778729] NET: Registered protocol family 15
<6>[ 0.778979] Bluetooth: RFCOMM TTY layer initialized
<6>[ 0.779005] Bluetooth: RFCOMM socket layer initialized
<6>[ 0.779014] Bluetooth: RFCOMM ver 1.11
<6>[ 0.779025] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 0.779034] Bluetooth: BNEP filters: protocol multicast
<6>[ 0.779046] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 0.779165] L2TP core driver, V2.0
<6>[ 0.779190] PPPoL2TP kernel driver, V2.0
<6>[ 0.779199] L2TP IP encapsulation support (L2TPv3)
<6>[ 0.779301] L2TP netlink interface
<6>[ 0.779341] L2TP ethernet pseudowire support (L2TPv3)
<6>[ 0.779764] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
<6>[ 0.779791] ThumbEE CPU extension supported.
<5>[ 0.779819] Registering SWP/SWPB emulation handler
<3>[ 0.781596] otg_wakelock_init: No USB transceiver found
<6>[ 0.781752] sunxi-rtc sunxi-rtc: setting system clock to 2017-04-19 23:20:30 UTC (1492644030)
<3>[ 0.781798] ths_fetch_sysconfig_para: type err device_used = 1.
<3>[ 0.781980] ths_fetch_sysconfig_para: type err ths_trip1_3 = 110.
<3>[ 0.782079] ths_fetch_sysconfig_para: type err ths_trip1_4 = 110.
<3>[ 0.782254] ths_fetch_sysconfig_para: type err ths_trip1_5 = 110.
<3>[ 0.782353] ths_fetch_sysconfig_para: type err ths_trip1_6 = 110.
<3>[ 0.782530] ths_fetch_sysconfig_para: type err ths_trip1_7 = 110.
<3>[ 0.782636] ths_fetch_sysconfig_para: type err ths_trip1_3_min = 0.
<3>[ 0.782813] ths_fetch_sysconfig_para: type err ths_trip1_3_max = 0.
<3>[ 0.782912] ths_fetch_sysconfig_para: type err ths_trip1_4_min = 0.
<3>[ 0.783088] ths_fetch_sysconfig_para: type err ths_trip1_4_max = 0.
<3>[ 0.783264] ths_fetch_sysconfig_para: type err ths_trip1_5_min = 0.
<3>[ 0.783362] ths_fetch_sysconfig_para: type err ths_trip1_5_max = 0.
<3>[ 0.783539] ths_fetch_sysconfig_para: type err ths_trip1_6_min = 0.
<3>[ 0.783637] ths_fetch_sysconfig_para: type err ths_trip1_6_max = 0.
<3>[ 0.783812] ths_fetch_sysconfig_para: type err ths_trip2_count = 0.
<3>[ 0.783912] ths_fetch_sysconfig_para: type err ths_trip2_0 = 0.
<6>[ 0.784812] sunxi_cpu_budget_vftable_init: support only one vf_table
<6>[ 0.785386] CPU Budget:Register notifier
<6>[ 0.785400] CPU Budget:register Success
<6>[ 0.785411] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
<4>[ 0.789646] =========GPS========= :failed to fetch gps configuration!
<6>[ 0.789670] ALSA device list:
<6>[ 0.789679] #0: audiocodec
<4>[ 0.789798] Warning: unable to open an initial console.
<6>[ 0.790270] Freeing init memory: 328K
<7>[ 0.799231] SELinux: 2048 avtab hash slots, 4517 rules.
<7>[ 0.801970] SELinux: 2048 avtab hash slots, 4517 rules.
<7>[ 0.802021] SELinux: 1 users, 2 roles, 379 types, 0 bools, 1 sens, 1024 cats
<7>[ 0.802037] SELinux: 86 classes, 4517 rules
<7>[ 0.804355] SELinux: Completing initialization.
<7>[ 0.804375] SELinux: Setting up existing superblocks.
<7>[ 0.804427] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<7>[ 0.804461] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>[ 0.804561] SELinux: initialized (dev bdev, type bdev), not configured for labeling
<7>[ 0.804590] SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>[ 0.804632] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 0.804673] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
<7>[ 0.805273] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>[ 0.810505] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>[ 0.810541] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>[ 0.810568] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
<7>[ 0.810591] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>[ 0.810642] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>[ 0.810758] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 0.810812] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<4>[ 0.840861] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 52, RTO !!
<4>[ 0.841715] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 52, RTO !!
<4>[ 0.841750] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 0.841856] [mmc]: mclk 0xf1c20090 0xc001000e
<4>[ 0.899313] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 0.899386] [mmc]: mclk 0xf1c20090 0xc001000e
<4>[ 0.951839] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 8, RTO !!
<6>[ 0.951871] *******************Try sdio*******************
<4>[ 0.952690] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 5, RTO !!
<4>[ 0.953528] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 5, RTO !!
<4>[ 0.954363] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 5, RTO !!
<4>[ 0.955198] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 5, RTO !!
<6>[ 0.955227] *******************Try sd *******************
<4>[ 0.956048] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 55, RTO !!
<4>[ 0.956885] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 55, RTO !!
<4>[ 0.957723] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 55, RTO !!
<4>[ 0.958561] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 2 err, cmd 55, RTO !!
<6>[ 0.958589] *******************Try mmc*******************
<4>[ 0.958604] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 0.958670] [mmc]: mclk 0xf1c20090 0xc001000e
<4>[ 1.014069] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 1.014138] [mmc]: mclk 0xf1c20090 0xc001000e
<5>[ 1.039236] type=1403 audit(1492644030.740:2): policy loaded auid=4294967295 ses=4294967295
<5>[ 1.044965] type=1404 audit(1492644030.750:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
<4>[ 1.069251] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 1.069345] [mmc]: mclk 0xf1c20090 0xc001000e
<4>[ 1.124424] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 1.124493] [mmc]: mclk 0xf1c20090 0xc001000e
<4>[ 1.181976] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 1.182044] [mmc]: mclk 0xf1c20090 0xc001000e
<4>[ 1.251227] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 1.251295] [mmc]: mclk 0xf1c20090 0xc001000e
<6>[ 1.297268] dump_store: get input mainkey "lcd0_para"
<6>[ 1.297294] dump_show: dump main key for lcd0_para
<3>[ 1.300696] init: init.common.rc: 93: ignored duplicate definition of service 'dhcpcd_bt-pan'
<3>[ 1.300967] init: init.common.rc: 113: ignored duplicate definition of service 'iprenew_bt-pan'
<4>[ 1.319209] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 1.319431] [mmc]: mclk 0xf1c20090 0xc100000b
<4>[ 1.370941] [mmc]: sdc2 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
<4>[ 1.371057] [mmc]: mclk 0xf1c20090 0xc100000b
<4>[ 1.426120] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
<4>[ 1.426241] [mmc]: mclk 0xf1c20090 0xc1000005
<3>[ 1.475755] init: /dev/hw_random not found
<4>[ 1.480218] [mmc]: sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
<4>[ 1.480326] [mmc]: mclk 0xf1c20090 0xc1000005
<6>[ 1.535728] mmc0: new high speed MMC card at address 0001
<6>[ 1.536512] mmcblk0: mmc0:0001 HYNIX 14.8 GiB
<6>[ 1.536767] mmcblk0boot0: mmc0:0001 HYNIX partition 1 2.00 MiB
<6>[ 1.536967] mmcblk0boot1: mmc0:0001 HYNIX partition 2 2.00 MiB
<6>[ 1.539734] mmcblk0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p12 p13 >
<4>[ 1.539803] mmcblk0: p1 size 24846336 extends beyond EOD, truncated
<6>[ 1.544822] mmcblk0boot1: unknown partition table
<6>[ 1.547164] mmcblk0boot0: unknown partition table
<6>[ 1.547460] *******************mmc init ok *******************
<7>[ 1.570281] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>[ 1.571030] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 1.574045] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 1.574366] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[ 1.610222] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>[ 1.613823] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<3>[ 1.614266] init: /dev/hw_random not found
<4>[ 1.632231] [NAND][NAND]nand init start, nand0_used_flag is 0
<4>[ 1.632254] [NAND]nand_cache_level err! 0[NAND]nand_capacity_level err! 0
<4>[ 1.632267] regisger ISP =====================
<4>[ 1.632320] [NAND]nand driver is disabled
<6>[ 1.673036] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
<7>[ 1.673100] SELinux: initialized (dev mmcblk0p7, type ext4), uses xattr
<6>[ 1.673316] fs_mgr: __mount(source=/dev/block/by-name/system,target=/system,type=ext4)=0
<4>[ 1.755034] [mmc]: mmc 0 detect change, present 1
<4>[ 2.250062] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 2.251598] [mmc]: sdc0 card_power_on start...
<4>[ 2.251666] axp22_dcdc1: Failed to create debugfs directory
<4>[ 2.251752] [mmc]: sdc0 card_power_on end ...ok
<4>[ 2.251761] [mmc]: sdc0 card_power_on ok
<4>[ 2.270044] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 2.270150] [mmc]: mclk 0xf1c20088 0x8002000e
<4>[ 2.342369] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 52, RTO !!
<4>[ 2.343206] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 52, RTO !!
<4>[ 2.343238] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 2.343320] [mmc]: mclk 0xf1c20088 0x8002000e
<4>[ 2.400769] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 2.400848] [mmc]: mclk 0xf1c20088 0x8002000e
<6>[ 2.420698] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[ 2.420749] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
<6>[ 2.420932] fs_mgr: check_fs(): mount(/dev/block/by-name/cache,/cache,ext4)=0
<4>[ 2.457729] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 8, RTO !!
<6>[ 2.457762] *******************Try sdio*******************
<4>[ 2.458582] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 5, RTO !!
<4>[ 2.459417] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 5, RTO !!
<4>[ 2.460249] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 5, RTO !!
<4>[ 2.461081] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 5, RTO !!
<6>[ 2.461108] *******************Try sd *******************
<4>[ 2.461929] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 55, RTO !!
<4>[ 2.462771] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 55, RTO !!
<4>[ 2.463612] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 55, RTO !!
<4>[ 2.464446] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 55, RTO !!
<6>[ 2.464473] *******************Try mmc*******************
<4>[ 2.464490] [mmc]: sdc0 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 2.464591] [mmc]: mclk 0xf1c20088 0x8002000e
<4>[ 2.520463] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 1, RTO !!
<4>[ 2.520499] [mmc]: mmc not poweroff notifiy
<4>[ 2.520522] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 2.523421] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 2.524953] [mmc]: sdc0 card power suppy is already on
<4>[ 2.540042] [mmc]: sdc0 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 2.540128] [mmc]: mclk 0xf1c20088 0x80030009
<4>[ 2.612635] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 52, RTO !!
<4>[ 2.613745] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 52, RTO !!
<4>[ 2.613779] [mmc]: sdc0 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 2.613858] [mmc]: mclk 0xf1c20088 0x80030009
<4>[ 2.671437] [mmc]: sdc0 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 2.671515] [mmc]: mclk 0xf1c20088 0x80030009
<4>[ 2.728669] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 8, RTO !!
<6>[ 2.728698] *******************Try sdio*******************
<4>[ 2.729785] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 5, RTO !!
<4>[ 2.730889] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 5, RTO !!
<4>[ 2.731992] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 5, RTO !!
<4>[ 2.733099] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 5, RTO !!
<6>[ 2.733127] *******************Try sd *******************
<4>[ 2.734215] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 55, RTO !!
<4>[ 2.735322] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 55, RTO !!
<4>[ 2.736429] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 55, RTO !!
<4>[ 2.737539] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 55, RTO !!
<6>[ 2.737567] *******************Try mmc*******************
<4>[ 2.737581] [mmc]: sdc0 set ios: clk 300000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 2.737659] [mmc]: mclk 0xf1c20088 0x80030009
<4>[ 2.793813] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 1, RTO !!
<4>[ 2.793842] [mmc]: mmc not poweroff notifiy
<4>[ 2.793855] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 2.796570] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 2.798100] [mmc]: sdc0 card power suppy is already on
<4>[ 2.810039] [mmc]: sdc0 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 2.810121] [mmc]: mclk 0xf1c20088 0x8003000e
<4>[ 2.883163] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 52, RTO !!
<4>[ 2.884808] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 52, RTO !!
<4>[ 2.884841] [mmc]: sdc0 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 2.884919] [mmc]: mclk 0xf1c20088 0x8003000e
<4>[ 2.942764] [mmc]: sdc0 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 2.942842] [mmc]: mclk 0xf1c20088 0x8003000e
<4>[ 3.000559] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 8, RTO !!
<6>[ 3.000591] *******************Try sdio*******************
<4>[ 3.002224] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 5, RTO !!
<4>[ 3.003869] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 5, RTO !!
<4>[ 3.005514] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 5, RTO !!
<4>[ 3.007159] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 5, RTO !!
<6>[ 3.007187] *******************Try sd *******************
<4>[ 3.008814] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 55, RTO !!
<4>[ 3.010459] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 55, RTO !!
<4>[ 3.012103] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 55, RTO !!
<4>[ 3.013743] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 55, RTO !!
<6>[ 3.013772] *******************Try mmc*******************
<4>[ 3.013785] [mmc]: sdc0 set ios: clk 200000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 3.013863] [mmc]: mclk 0xf1c20088 0x8003000e
<4>[ 3.070579] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 1, RTO !!
<4>[ 3.070611] [mmc]: mmc not poweroff notifiy
<4>[ 3.070634] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 3.073494] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 3.075024] [mmc]: sdc0 card power suppy is already on
<4>[ 3.090040] [mmc]: sdc0 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 3.090125] [mmc]: mclk 0xf1c20088 0x80030009
<4>[ 3.162627] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 52, RTO !!
<4>[ 3.163744] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 52, RTO !!
<4>[ 3.163778] [mmc]: sdc0 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 3.163862] [mmc]: mclk 0xf1c20088 0x80030009
<6>[ 3.192949] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/cache
<4>[ 3.221607] [mmc]: sdc0 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 3.221743] [mmc]: mclk 0xf1c20088 0x80030009
<4>[ 3.278943] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 8, RTO !!
<6>[ 3.278993] *******************Try sdio*******************
<4>[ 3.280086] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 5, RTO !!
<4>[ 3.281202] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 5, RTO !!
<4>[ 3.282321] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 5, RTO !!
<4>[ 3.283440] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 5, RTO !!
<6>[ 3.283477] *******************Try sd *******************
<4>[ 3.284579] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 55, RTO !!
<4>[ 3.285685] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 55, RTO !!
<4>[ 3.286795] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 55, RTO !!
<4>[ 3.287902] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 55, RTO !!
<6>[ 3.287932] *******************Try mmc*******************
<4>[ 3.287950] [mmc]: sdc0 set ios: clk 150000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 3.288070] [mmc]: mclk 0xf1c20088 0x80030009
<4>[ 3.344232] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 0 err, cmd 1, RTO !!
<4>[ 3.344267] [mmc]: mmc not poweroff notifiy
<4>[ 3.344290] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<6>[ 4.009530] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<6>[ 4.009629] e2fsck: /dev/block/by-name/cache: clean, 17/49152 files, 6362/196608 blocks
<6>[ 4.027444] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1
<7>[ 4.027506] SELinux: initialized (dev mmcblk0p10, type ext4), uses xattr
<6>[ 4.027661] fs_mgr: __mount(source=/dev/block/by-name/cache,target=/cache,type=ext4)=0
<6>[ 4.045041] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[ 4.045099] SELinux: initialized (dev mmcblk0p13, type ext4), uses xattr
<6>[ 4.045239] fs_mgr: check_fs(): mount(/dev/block/by-name/alog,/logger,ext4)=0
<6>[ 4.130131] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/alog
<6>[ 4.156082] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<6>[ 4.156154] e2fsck: /dev/block/by-name/alog: clean, 11/4096 files, 1295/16384 blocks
<6>[ 4.171820] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1
<7>[ 4.171883] SELinux: initialized (dev mmcblk0p13, type ext4), uses xattr
<6>[ 4.172027] fs_mgr: __mount(source=/dev/block/by-name/alog,target=/logger,type=ext4)=0
<6>[ 4.190939] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[ 4.190999] SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
<6>[ 4.191145] fs_mgr: check_fs(): mount(/dev/block/by-name/UDISK,/data,ext4)=0
<6>[ 4.260122] fs_mgr: Running /system/bin/e2fsck on /dev/block/by-name/UDISK
<6>[ 4.310353] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
<6>[ 4.310425] e2fsck: /dev/block/by-name/UDISK: clean, 1805/773680 files, 264944/3093504 blocks
<6>[ 4.324354] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,barrier=1,noauto_da_alloc
<7>[ 4.324421] SELinux: initialized (dev mmcblk0p1, type ext4), uses xattr
<6>[ 4.324569] fs_mgr: __mount(source=/dev/block/by-name/UDISK,target=/data,type=ext4)=0
<6>[ 4.392838] Adding 131068k swap on /dev/block/zram0. Priority:-1 extents:1 across:131068k SS
<6>[ 4.575771] [DISP]disp_module_init
<4>[ 4.581457] [DISP] parser_disp_init_para,line:158: fetch script data disp_init.screen2_output_type fail
<4>[ 4.581480] [DISP] parser_disp_init_para,line:175: fetch script data disp_init.screen2_output_mode fail
<4>[ 4.581505] [DISP] parser_disp_init_para,line:236: fetch script data disp_init.fb2_format fail
<4>[ 4.581520] [DISP] parser_disp_init_para,line:241: fetch script data disp_init.fb2_scaler_mode_enable fail
<4>[ 4.581535] [DISP] parser_disp_init_para,line:246: fetch script data disp_init.fb2_width fail
<4>[ 4.581549] [DISP] parser_disp_init_para,line:251: fetch script data disp_init.fb2_height fail
<4>[ 4.594291] [fb_map_boot_logo]w=0,h=0,addr=0x0
<4>[ 4.594315] vmalloc: allocation failure: 0 bytes
<4>[ 4.594326] init: page allocation failure: order:0, mode:0xd2
<4>[ 4.594336] [DISP] Fb_map_boot_logo,line:440: Fb_map_boot_logo err: Fb_map_kernel failed!
<6>[ 4.597037] [DISP]disp_module_init finish
<6>[ 4.634755] [LCD]lcd_module_init
<6>[ 4.636868] [LCD]open, step 0 finish
<6>[ 4.650077] [LCD]open, step 1 finish
<6>[ 4.810039] [LCD]open, step 2 finish
<6>[ 4.870121] [LCD]open, step 3 finish
<6>[ 4.880125] [LCD]lcd_module_init finish
<4>[ 5.014385] Mali: gpu_mali400_0: tft_count in sys_config.fex is invalid!
<4>[ 5.014459] axp22_dcdc2: Failed to create debugfs directory
<4>[ 5.014489] Mali: Set gpu frequency to 384 MHz
<4>[ 5.014782] Mali: Init Mali gpu clocks successfully
<4>[ 5.018025] Mali: Mali device driver loaded
<3>[ 5.021522] init: width = 1024
<3>[ 5.021650] init: height = 600
<3>[ 5.021832] init: s.st_size = 2457600
<3>[ 5.120319] init: -----------rogge---------------do_format_userdata
<3>[ 5.122731] init: dont need format /dev/block/by-name/private
<7>[ 5.127547] SELinux: initialized (dev mmcblk0p12, type vfat), uses genfs_contexts
<3>[ 5.202129] init: Warning! Service bootclone needs a SELinux domain defined; please fix!
<3>[ 5.203684] init: Warning! Service precopy needs a SELinux domain defined; please fix!
<7>[ 5.220324] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
<7>[ 5.261209] SELinux: initialized (dev mmcblk0p2, type vfat), uses genfs_contexts
<5>[ 5.266349] type=1400 audit(1492644034.960:4): avc: denied { write } for pid=126 comm="busybox" name="/" dev="mmcblk0p2" ino=1 scontext=u:r:init:s0 tcontext=u:object_r:vfat:s0 tclass=dir permissive=0
<6>[ 5.352248] binder: 128:128 transaction failed 29189, size 0-0
<3>[ 5.371674] sunxikbd_script_init: key para not found, used default para.
<4>[ 5.382607] keyname:ctp_para subname:ctp_power_io ,get error!
<4>[ 5.382665] axp22_ldoio1: Failed to create debugfs directory
<4>[ 5.383489] get_device_para_value:get subname:lsm9ds0_acc_mag error! val.val:0
<4>[ 5.383503] get_detect_list: script_get_item err.support_number = 0.
<4>[ 5.383631] sw_get_write_info:read erro or read null !
<4>[ 5.383822] get write info erro!
<4>[ 5.383874] get sysconfig para erro!
<4>[ 5.383906] get sysconfig para erro!
<4>[ 5.383933] get sysconfig para erro!
<4>[ 5.384011] ctp_wakeup: !!!!gpio data 1
<4>[ 5.417171] gslX680new: no versions for exported symbols: kernel tainted.
<4>[ 5.417200] Disabling lock debugging due to kernel taint
<6>[ 5.418560] =====ctp_fetch_sysconfig_para=====.
<3>[ 5.418592] ctp_fetch_sysconfig_para: ctp_power_io script_get_item err.
<3>[ 5.418804] ctp_irq gpio number is 37
<4>[ 5.418954] axp22_ldoio1: Failed to create debugfs directory
<3>[ 5.419575] wakeup gpio_request is failed
<4>[ 5.419702] gsl_ts_init:ctp_ops.init_platform_resource err.
<4>[ 5.450378] i2c-core: driver [gslX680] using legacy suspend method
<4>[ 5.450399] i2c-core: driver [gslX680] using legacy resume method
<6>[ 5.450429] ctp_detect: addr= 40
<6>[ 5.450664] I2C connection sucess!
<6>[ 5.450679]
<6>[ 5.450682]
<6>[ 5.450685] +++++++++++++++++++++++++++++++++
<6>[ 5.450689] ++++++ GSLX680 new used +++++++++
<6>[ 5.450694] +++++++++++++++++++++++++++++++++
<4>[ 5.451013] GSLX680 Enter gsl_ts_probe
<4>[ 5.451342] [GSLX680] Enter gsl_ts_init_ts
<4>[ 5.452316] ****************************************************************
<4>[ 5.467412] i2c-core: driver [mir3da] using legacy suspend method
<4>[ 5.467434] i2c-core: driver [mir3da] using legacy resume method
<3>[ 5.468359] [MIR3DA] 'Find Mir3da gsensor!!
<4>[ 5.490191] get_device_para_value:get subname:gt9xxnew_ts error! val.val:0
<4>[ 5.490212] get_detect_list: script_get_item err.support_number = 5.
<4>[ 5.498812] sunxi_i2c_do_xfer()945 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x26)
<3>[ 5.498832] [MIR3DA] Can't find Mir3da gsensor!!
<38>[ 5.514934] logd.auditd: start
<5>[ 5.686647] [VFE]Welcome to Video Front End driver
<5>[ 5.687553] [VFE]pdev->id = 0
<5>[ 5.687569] [VFE]dev->mipi_sel = 0
<5>[ 5.687576] [VFE]dev->vip_sel = 0
<5>[ 5.687583] [VFE]dev->isp_sel = 0
<4>[ 5.693760] [VFE_WARN]vfe vpu clock is null
<4>[ 5.701447] [VFE_WARN]os_gpio_request failed, gpio_name=, gpio=142, ret=0xfffffff0, -16
<4>[ 5.701470] [VFE_WARN]os_gpio_request failed, gpio_name=, gpio=129, ret=0xfffffff0, -16
<4>[ 5.701534] [ISP] isp platform_id = 3!
<5>[ 5.701771] [VFE]vfe_init end
<5>[ 5.710127] [VFE]probe_work_handle start!
<5>[ 5.710159] [VFE]v4l2 subdev register input_num = 0
<4>[ 5.710222] axp22_dldo3: Failed to create debugfs directory
<4>[ 5.710241] axp22_ldoio0: Failed to create debugfs directory
<4>[ 5.710259] axp22_eldo2: Failed to create debugfs directory
<4>[ 5.710274] axp22_dldo3: Failed to create debugfs directory
<5>[ 5.710284] [VFE]vfe sensor detect start! input_num = 0
<4>[ 5.710298] [VFE_WARN]NOT found this item: gc2145, you can add this sensor in the sensor_list_t!
<5>[ 5.710311] [VFE]Sub device register "gc2145" i2c_addr = 0x78 start!
<5>[ 5.711258] [VFE]registered sensor subdev is OK!
<5>[ 5.711278] [VFE]Check sensor!
<6>[ 5.729374] usbcore: registered new interface driver asix
<5>[ 5.736348] [VFE]mclk on
<6>[ 5.739325] usbcore: registered new interface driver qf9700
<6>[ 5.750730] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
<6>[ 5.761770] usbcore: registered new interface driver rtl8150
<6>[ 5.770911] usbcore: registered new interface driver cdc_ether
<6>[ 5.780814] Bluetooth: BlueSleep Mode Driver Ver 1.1
<6>[ 5.784153] Bluetooth: bluesleep_get_uart_port enter.
<6>[ 5.784175] Bluetooth: bluesleep_get_uart_port get uart_port from blusleep_uart_dev: uart, port irq: 33
<6>[ 5.784182]
<4>[ 5.784188] bluesleep_acquire irq
<4>[ 5.786767] [CSI][GC2145]V4L2_IDENT_SENSOR=2145=======sensor_write_array:637=====
<3>[ 5.792219] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
<3>[ 5.799403] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'
<3>[ 5.802819] init: Warning! Service fotabinder needs a SELinux domain defined; please fix!
<3>[ 5.808000] android_usb: already disabled
<6>[ 5.821520] adb_open
<6>[ 5.821570] mtp_bind_config
<4>[ 5.821644] ep_matches, wrn: endpoint already claimed, ep(0xc098dda4, 0xeeb97000, ep1in-bulk)
<4>[ 5.821660] ep_matches, wrn: endpoint already claimed, ep(0xc098dda4, 0xeeb97000, ep1in-bulk)
<4>[ 5.821672] ep_matches, wrn: endpoint already claimed, ep(0xc098ddf0, 0xeeb97000, ep1out-bulk)
<4>[ 5.821684] gadget_is_softwinner_otg is not -int
<4>[ 5.821692] gadget_is_softwinner_otg is not -int
<6>[ 5.821764] adb_bind_config
<4>[ 5.821779] ep_matches, wrn: endpoint already claimed, ep(0xc098dda4, 0xeeb97000, ep1in-bulk)
<4>[ 5.821791] ep_matches, wrn: endpoint already claimed, ep(0xc098ddf0, 0xeeb97000, ep1out-bulk)
<4>[ 5.821812] ep_matches, wrn: endpoint already claimed, ep(0xc098dda4, 0xeeb97000, ep1in-bulk)
<4>[ 5.821825] ep_matches, wrn: endpoint already claimed, ep(0xc098ddf0, 0xeeb97000, ep1out-bulk)
<4>[ 5.821837] ep_matches, wrn: endpoint already claimed, ep(0xc098de3c, 0xef1c09c0, ep2in-bulk)
<4>[ 5.900104] =============gsl_load_fw start==============
<4>[ 6.041008] =======sensor_write_array end =====
<4>[ 6.105007] ###########close all layers 0
<5>[ 6.410111] [VFE]mclk off
<5>[ 6.422273] [VFE]Sub device register "gc2145" is OK!
<5>[ 6.422296] [VFE]v4l2 subdev register input_num = 1
<4>[ 6.422352] axp22_dldo3: Failed to create debugfs directory
<4>[ 6.422372] axp22_ldoio0: Failed to create debugfs directory
<4>[ 6.422391] axp22_eldo2: Failed to create debugfs directory
<4>[ 6.422407] axp22_dldo3: Failed to create debugfs directory
<5>[ 6.422418] [VFE]vfe sensor detect start! input_num = 1
<4>[ 6.422433] [VFE_WARN]NOT found this item: gc0312, you can add this sensor in the sensor_list_t!
<5>[ 6.422446] [VFE]Sub device register "gc0312" i2c_addr = 0x42 start!
<5>[ 6.423525] [VFE]registered sensor subdev is OK!
<5>[ 6.423542] [VFE]Check sensor!
<4>[ 6.435881] [VFE_WARN]os_gpio_set_status, hdl is NULL
<5>[ 6.448027] [VFE]mclk on
<4>[ 6.462039] ###########close all layers 0
<4>[ 6.499193] =============gsl_load_fw end==============
<4>[ 6.509518] gc0312------------------------------------------james--16-47#########check mem read 0xb0 = 5a 5a 5a 5a #########
<4>[ 6.783315] healthd: battery l=91 v=4035 t=30.0 h=2 st=2 c=111 chg=u
<4>[ 6.784414] healthd: battery l=91 v=4035 t=30.0 h=2 st=2 c=111 chg=u
<4>[ 6.857594] healthd: battery l=91 v=4035 t=30.0 h=2 st=2 c=111 chg=u
<4>[ 6.858891] healthd: battery l=91 v=4035 t=30.0 h=2 st=2 c=111 chg=u
<6>[ 6.917328] android_usb gadget: high-speed config #1: android
<5>[ 6.990162] [VFE]mclk off
<5>[ 7.002363] [VFE]Sub device register "gc0312" is OK!
<5>[ 7.003162] [VFE]V4L2 device registered as video0
<5>[ 7.003215] [VFE]register_early_suspend @ probe handle!
<5>[ 7.003226] [VFE]probe_work_handle end!
<7>[ 9.419393] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<3>[ 10.950554] init: Warning! Service fotabinder needs a SELinux domain defined; please fix!
<6>[ 12.896558] warning: `main' uses 32-bit capabilities (legacy support in use)
<3>[ 15.118062] init: Warning! Service sensors needs a SELinux domain defined; please fix!
<3>[ 15.119842] init: Warning! Service fotabinder needs a SELinux domain defined; please fix!
<4>[ 15.410167] [MIR3DA] ====444 manual_load_cali_file(), bLoad = 1, readOffsetCnt=0.
<4>[ 15.410176]
<4>[ 15.412045] [MIR3DA] ========= FILE EXIST & WRITE OFFSET!
<6>[ 16.810893] request_suspend_state: wakeup (3->0) at 16810867302 (2017-04-19 23:20:46.514381674 UTC)
<3>[ 20.860781] init: Warning! Service fotabinder needs a SELinux domain defined; please fix!
<3>[ 25.869473] init: Warning! Service fotabinder needs a SELinux domain defined; please fix!
<3>[ 26.558144] init: Warning! Service preinstall needs a SELinux domain defined; please fix!
<4>[ 26.591374] healthd: battery l=91 v=3983 t=30.0 h=2 st=2 c=446 chg=u
<6>[ 27.178088] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
<6>[ 27.178205] lowmemorykiller: oom_adj 0 => oom_score_adj 0
<6>[ 27.178217] lowmemorykiller: oom_adj 1 => oom_score_adj 58
<6>[ 27.178226] lowmemorykiller: oom_adj 2 => oom_score_adj 117
<6>[ 27.178235] lowmemorykiller: oom_adj 3 => oom_score_adj 176
<6>[ 27.178245] lowmemorykiller: oom_adj 9 => oom_score_adj 529
<6>[ 27.178254] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
<6>[ 29.219055] acc_open
<6>[ 29.219095] acc_release
<3>[ 30.374313] init: Warning! Service fotabinder needs a SELinux domain defined; please fix!
<4>[ 30.716958] RTL871X: module init start
<4>[ 30.716983] RTL871X: rtl8723cs v4.3.22.9_16440.20151221_BTCOEX20151214-0700
<4>[ 30.716993] RTL871X: build time: Oct 22 2016 19:28:58
<4>[ 30.717002] RTL871X: rtl8723cs BT-Coex version = BTCOEX20151214-0700
<4>[ 30.717027] RTL871X: ----- platform_wifi_power_on sdc_id: 1
<4>[ 30.717116] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 30.718680] [mmc]: sdc1 card_power_on start...
<4>[ 30.718691] [mmc]: sdc1 power_supply is null
<4>[ 30.718699] [mmc]: sdc1 card_power_on ok
<4>[ 30.730055] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 30.730177] [mmc]: mclk 0xf1c2008c 0x8002000e
<4>[ 30.802347] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 52, RTO !!
<4>[ 30.803212] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 52, RTO !!
<4>[ 30.803261] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 30.803399] [mmc]: mclk 0xf1c2008c 0x8002000e
<4>[ 30.817256] [wifi_pm]: wifi power on
<4>[ 30.817288] RTL871X: platform_wifi_power_on: power up, rescan card.
<4>[ 30.817933] RTL871X: module init ret=0
<4>[ 30.860976] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 30.861125] [mmc]: mclk 0xf1c2008c 0x8002000e
<4>[ 30.914144] [mmc]: *** sunxi_mci_dump_errinfo(L773): smc 1 err, cmd 8, RTO !!
<6>[ 30.914194] *******************Try sdio*******************
<4>[ 30.914554] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
<4>[ 30.914689] [mmc]: mclk 0xf1c2008c 0x8002000e
<4>[ 30.979716] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
<4>[ 30.979863] [mmc]: mclk 0xf1c2008c 0x8002000e
<4>[ 31.033465] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
<4>[ 31.033744] [mmc]: mclk 0xf1c2008c 0x8100000b
<4>[ 31.089028] [mmc]: sdc1 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
<4>[ 31.089225] [mmc]: mclk 0xf1c2008c 0x8140030b
<6>[ 31.151170] mmc2: new high speed SDIO card at address 0001
<4>[ 31.153600] RTL871X: CHIP TYPE: RTL8703B
<4>[ 31.154186] RTL871X: rtw_hal_config_rftype RF_Type is 3 TotalTxPath is 1
<4>[ 31.154207] RTL871X: Chip Version Info: CHIP_8703B_Normal_Chip_TSMC_B_CUT_1T1R_RomVer(0)
<4>[ 31.157776] RTL871X: SetHwReg8703B: bMacPwrCtrlOn=1
<4>[ 31.158639] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
<4>[ 31.158659] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
<4>[ 31.158746] RTL871X: PowerOnCheck: 0x1B8 test Pass.
<4>[ 31.159187] RTL871X: ReadAdapterInfo8703BS, 0x4e=0xe2
<4>[ 31.159326] RTL871X: EEPROM type is E-FUSE
<4>[ 31.159725] RTL871X: hal_EfuseSwitchToBank: Efuse switch bank to 0
<4>[ 31.164262] RTL871X: hal_ReadEFuse_WiFi: data end at address=0x16
<4>[ 31.164287] RTL871X: Efuse Realmap:
<4>[ 31.164296]
<4>[ 31.164302] 29 81 03 7C E1 00 28 00 B3 04 65 45 10 86 40 02
<4>[ 31.164361] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.164416] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.164469] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.164520] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.164572] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.164622] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.164671] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.164719] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.164786] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.164856] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.164903] FF FF FF FF FF FF FF FF FF FF 44 FF FF FF FF FF
<4>[ 31.164953] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.164999] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.165045] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.165097] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.165150] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.165202] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.165253] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.165306] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.165358] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.165411] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.165465] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.165517] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.165567] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.165622] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.165670] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.165715] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.165761] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.165807] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.165853] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.165899] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.181722] RTL871X: efuse file: /system/etc/wifi/wifi_efuse_8723cs.map
<4>[ 31.181832] RTL871X: 0x000: 29 81 03 7C E1 00 28 00 B3 04 65 45 10 86 40 02
<4>[ 31.181941] RTL871X: 0x010: 27 27 27 27 27 27 2A 2A 2A 2A 2A 02 FF FF FF FF
<4>[ 31.182036] RTL871X: 0x020: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.182139] RTL871X: 0x030: FF FF FF FF FF FF FF FF FF FF 27 27 27 27 27 27
<4>[ 31.182236] RTL871X: 0x040: 2A 2A 2A 2A 2A 02 FF FF FF FF FF FF FF FF FF FF
<4>[ 31.182343] RTL871X: 0x050: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.182439] RTL871X: 0x060: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.182558] RTL871X: 0x070: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.182661] RTL871X: 0x080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.182773] RTL871X: 0x090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.182866] RTL871X: 0x0a0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.182973] RTL871X: 0x0b0: FF FF FF FF FF FF FF FF 20 20 25 00 00 00 FF FF
<4>[ 31.183073] RTL871X: 0x0c0: FF 39 20 11 00 00 00 FF 00 FF 12 FF FF FF FF FF
<4>[ 31.183181] RTL871X: 0x0d0: 3E 10 01 02 23 00 80 FF 20 04 4C 02 03 B7 21 02
<4>[ 31.183285] RTL871X: 0x0e0: 0C 00 22 04 00 08 00 32 FF 21 02 0C 00 22 2A 01
<4>[ 31.183404] RTL871X: 0x0f0: 01 00 00 00 00 00 00 00 00 00 00 00 02 00 FF FF
<4>[ 31.183516] RTL871X: 0x100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
<4>[ 31.183611] RTL871X: 0x110: 00 EB 00 6E 01 00 00 00 00 FF FF FF FF FF FF FF
<4>[ 31.183707] RTL871X: 0x120: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.183813] RTL871X: 0x130: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.183903] RTL871X: 0x140: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.184025] RTL871X: 0x150: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.184138] RTL871X: 0x160: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.184247] RTL871X: 0x170: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.184342] RTL871X: 0x180: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.184439] RTL871X: 0x190: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.184533] RTL871X: 0x1a0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.184595] RTL871X: 0x1b0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.184655] RTL871X: 0x1c0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.184713] RTL871X: 0x1d0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.184792] RTL871X: 0x1e0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.184848] RTL871X: 0x1f0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
<4>[ 31.184905]
<4>[ 31.188287] RTL871X: hal_EfuseSwitchToBank: Efuse switch bank to 0
<4>[ 31.195094] RTL871X: hal_ReadEFuse_WiFi: data end at address=0x16
<4>[ 31.195119] RTL871X: Efuse Realmap:
<4>[ 31.195125]
<4>[ 31.195131] FF FF FF FF FF FF
<4>[ 31.219583] RTL871X: wifi_mac file: /data/wifimac.txt
<4>[ 31.219612] RTL871X: 24:7c:8d:1b:d7:30
<4>[ 31.219916] RTL871X: Hal_EfuseParseBTCoexistInfo_8703B: Enable BT-coex, ant_num=1
<4>[ 31.219937] RTL871X: Hal_EfuseParseVoltage_8703B hwinfo[EEPROM_Voltage_ADDR_8703B] =b3
<4>[ 31.219949] RTL871X: Hal_EfuseParseVoltage_8703B pHalData->adjuseVoltageVal =b
<4>[ 31.219960] RTL871X: Hal_ReadRFGainOffset, kfree config:0
<4>[ 31.222286] RTL871X: kfree flag:1
<4>[ 31.222315] RTL871X: bb_gain:0
<4>[ 31.222728] RTL871X: rtl8703b_FirmwareDownload fw: FW_NIC, size: 20944
<4>[ 31.222751] RTL871X: rtl8703b_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x3b2, Month=11, Date=26, Hour=17, Minute=21
<4>[ 31.222764] RTL871X: rtl8703b_FirmwareDownload(): Shift for fw header!
<4>[ 31.222776] RTL871X: rtl8703b_FirmwareDownload by IO write!
<4>[ 31.413548] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x07050305
<4>[ 31.413947] RTL871X: _8051Reset8703: Finish
<4>[ 31.427750] RTL871X: _FWFreeToGo: Polling FW ready OK! (118, 10ms), REG_MCUFWDL:0x070503c6
<4>[ 31.427770] RTL871X: rtl8703b_FirmwareDownload: DLFW OK !
<4>[ 31.427782] RTL871X: rtl8703b_FirmwareDownload success. write_fw:1, 200ms
<4>[ 31.427826] RTL871X: <=== rtl8703b_FirmwareDownload()
<4>[ 31.439171] RTL871X: hal_read_mac_hidden_rpt OK! (2, 10ms), fwdl:1, id:0x19
<4>[ 31.439763] RTL871X: SetHwReg8703B: bMacPwrCtrlOn=0
<4>[ 31.440406] RTL871X: rtw_hal_read_chip_info in 290 ms
<4>[ 31.440734] RTL871X: init_channel_set((null)) ChannelPlan ID:0x20, ch num:13
<4>[ 31.442003] RTL871X: rtw_alloc_macid((null)) if1, hwaddr:ff:ff:ff:ff:ff:ff macid:1
<4>[ 31.442206] RTL871X: rtw_register_early_suspend
<4>[ 31.442288] RTL871X: Init_ODM_ComInfo_8703b(): fab_ver=0 cut_ver=1
<4>[ 31.442333] RTL871X: rtw_macaddr_cfg mac addr:24:7c:8d:1b:d7:30
<4>[ 31.442590] RTL871X: bDriverStopped:True, bSurpriseRemoved:False, bup:0, hw_init_completed:0
<4>[ 31.442965] RTL871X: init_channel_set((null)) ChannelPlan ID:0x20, ch num:13
<4>[ 31.444577] RTL871X: rtw_alloc_macid((null)) if2, hwaddr:ff:ff:ff:ff:ff:ff macid:1
<4>[ 31.444748] RTL871X: rtw_wiphy_alloc(phy0)
<4>[ 31.444764] RTL871X: rtw_wdev_alloc(padapter=f29cf000)
<4>[ 31.444835] RTL871X: rtw_wiphy_alloc(phy1)
<4>[ 31.444850] RTL871X: rtw_wdev_alloc(padapter=f311c000)
<4>[ 31.444869] RTL871X: rtw_wiphy_register(phy0)
<4>[ 31.446927] RTL871X: rtw_ndev_init(wlan0) if1 mac_addr=24:7c:8d:1b:d7:30
<4>[ 31.457621] RTL871X: rtw_wiphy_register(phy1)
<4>[ 31.461352] RTL871X: rtw_ndev_init(p2p0) if2 mac_addr=26:7c:8d:1b:d7:30
<6>[ 31.472392] *******************sdio init ok*******************
<4>[ 32.297846] RTL871X: +871x_drv - if2_open, bup=0
<4>[ 32.297873] RTL871X: +871x_drv - drv_open, bup=0
<4>[ 32.298034] RTL871X: FW does not exist before power on!!
<4>[ 32.301220] RTL871X: SetHwReg8703B: bMacPwrCtrlOn=1
<4>[ 32.301653] RTL871X: PowerOnCheck: val_mix:0x0000063f, res:0x0000063f
<4>[ 32.301668] RTL871X: PowerOnCheck: 0x100 the result of cmd52 and cmd53 is the same.
<4>[ 32.301737] RTL871X: PowerOnCheck: 0x1B8 test Pass.
<4>[ 32.302018] RTL871X: Power on ok!
<4>[ 32.302202] RTL871X: rtl8703b_FirmwareDownload fw: FW_NIC, size: 20944
<4>[ 32.302218] RTL871X: rtl8703b_FirmwareDownload: fw_ver=4 fw_subver=0000 sig=0x3b2, Month=11, Date=26, Hour=17, Minute=21
<4>[ 32.302231] RTL871X: rtl8703b_FirmwareDownload(): Shift for fw header!
<4>[ 32.302244] RTL871X: rtl8703b_FirmwareDownload by IO write!
<4>[ 32.609468] RTL871X: polling_fwdl_chksum: Checksum report OK! (1, 0ms), REG_MCUFWDL:0x00050305
<4>[ 32.609941] RTL871X: _8051Reset8703: Finish
<4>[ 32.623757] RTL871X: _FWFreeToGo: Polling FW ready OK! (27, 20ms), REG_MCUFWDL:0x000503c6
<4>[ 32.623778] RTL871X: rtl8703b_FirmwareDownload: DLFW OK !
<4>[ 32.623789] RTL871X: rtl8703b_FirmwareDownload success. write_fw:1, 320ms
<4>[ 32.623847] RTL871X: <=== rtl8703b_FirmwareDownload()
<4>[ 32.623861] RTL871X: HalDetectPwrDownMode(): PDN=0
<4>[ 32.623870] RTL871X: Set RF Chip ID to RF_6052 and RF type to 3.
<4>[ 32.890547] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[ 32.890704] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[ 32.893116] RTL871X: pDM_Odm TxPowerTrackControl = 1
<4>[ 32.893163] RTL871X: pDM_Odm TxPowerTrackControl = 1
<4>[ 33.359483] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[ 33.362764] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[ 33.377309] RTL871X: #### hw_var_set_opmode() -5398 iface_type(0) mode = 2 ####
<4>[ 33.377582] RTL871X: rtw_rf_get_kfree_tx_gain_offset path:0, ch:6, bb_gain_sel:0, kfree_offset:0
<4>[ 33.377966] RTL871X: kfree gain_offset 0x55:0x8206e RTL871X: after :0x206e
<4>[ 33.379276] RTL871X: MAC Address = 24:7c:8d:1b:d7:30
<4>[ 33.380555] RTL871X: start rtl8703bs_xmit_thread(wlan0)
<4>[ 33.380952] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=21 seq=0 len=1
<4>[ 33.381249] RTL871X: rtw_cfg80211_init_wiphy:rf_type=3
<4>[ 33.381273] RTL871X: [HT] HAL Support STBC = 0x01
<4>[ 33.381313] RTL871X: +871x_drv - if2_open, bup=0
<4>[ 33.381689] RTL871X: start rtl8703bs_xmit_thread(p2p0)
<4>[ 33.381825] RTL871X: rtw_cfg80211_init_wiphy:rf_type=3
<4>[ 33.381843] RTL871X: [HT] HAL Support STBC = 0x01
<4>[ 33.381870] RTL871X: -871x_drv - if2_open, bup=1
<4>[ 33.381878] RTL871X: -871x_drv - drv_open, bup=1
<4>[ 33.381888] RTL871X: -871x_drv - if2_open, bup=1
<4>[ 33.382121] RTL871X: cfg80211_rtw_set_power_mgmt(p2p0) enabled:1, timeout:-1
<6>[ 33.382873] ADDRCONF(NETDEV_UP): p2p0: link is not ready
<4>[ 33.441600] RTL871X: cfg80211_rtw_flush_pmksa(p2p0)
<4>[ 34.039340] RTL871X: +871x_drv - drv_open, bup=1
<4>[ 34.039378] RTL871X: -871x_drv - drv_open, bup=1
<4>[ 34.039560] RTL871X: cfg80211_rtw_set_power_mgmt(wlan0) enabled:1, timeout:-1
<6>[ 34.040356] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>[ 34.104675] RTL871X: cfg80211_rtw_flush_pmksa(wlan0)
<4>[ 34.267907] RTL871X: cfg80211_rtw_scan(wlan0)
<4>[ 34.268401] RTL871X: [HW_VAR_CHECK_TXBUF] no packet in tx packet buffer (0)
<4>[ 34.273286] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=21 seq=1 len=1
<4>[ 34.273839] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=9 seq=2 len=7
<4>[ 34.274905] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[ 34.275206] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[ 34.374791] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 2
<4>[ 34.375108] RTL871X: ===>phy_SwChnl8703B: Channel = 2
<4>[ 34.460653] RTL871X: rtw_android_priv_cmd: Android private cmd "BTCOEXSCAN-STOP" on wlan0
<4>[ 34.472833] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 3
<4>[ 34.473050] RTL871X: ===>phy_SwChnl8703B: Channel = 3
<4>[ 34.473147] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-STOP" on wlan0
<4>[ 34.474236] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-ADD 3" on wlan0
<4>[ 34.475281] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<4>[ 34.476327] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-STOP" on wlan0
<4>[ 34.477365] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-REMOVE 2" on wlan0
<4>[ 34.478379] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<4>[ 34.542734] RTL871X: rtw_android_priv_cmd: Android private cmd "SETBAND 0" on wlan0
<4>[ 34.542810] RTL871X: rtw_set_band(wlan0) band:0
<4>[ 34.555828] RTL871X: rtw_android_priv_cmd: Android private cmd "SETSUSPENDMODE 0" on wlan0
<4>[ 34.555884] RTL871X: Unknown PRIVATE command SETSUSPENDMODE 0 - ignored
<4>[ 34.571886] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 4
<4>[ 34.572103] RTL871X: ===>phy_SwChnl8703B: Channel = 4
<4>[ 34.604928] LCD:24
<4>[ 34.672464] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 5
<4>[ 34.672673] RTL871X: ===>phy_SwChnl8703B: Channel = 5
<4>[ 34.772414] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 6
<4>[ 34.775666] RTL871X: ===>phy_SwChnl8703B: Channel = 6
<4>[ 34.881370] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 7
<4>[ 34.881572] RTL871X: ===>phy_SwChnl8703B: Channel = 7
<4>[ 34.987829] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 8
<4>[ 34.988205] RTL871X: ===>phy_SwChnl8703B: Channel = 8
<3>[ 35.074522] init: Warning! Service fotabinder needs a SELinux domain defined; please fix!
<4>[ 35.091512] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 9
<4>[ 35.091708] RTL871X: ===>phy_SwChnl8703B: Channel = 9
<4>[ 35.197023] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 10
<4>[ 35.197264] RTL871X: ===>phy_SwChnl8703B: Channel = 10
<4>[ 35.291376] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 11
<4>[ 35.291756] RTL871X: ===>phy_SwChnl8703B: Channel = 11
<4>[ 35.394268] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 12
<4>[ 35.394486] RTL871X: ===>phy_SwChnl8703B: Channel = 12
<4>[ 35.491449] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 13
<4>[ 35.491643] RTL871X: ===>phy_SwChnl8703B: Channel = 13
<4>[ 35.592734] RTL871X: ===>phy_SpurCalibration_8703B: Channel = 1
<4>[ 35.592975] RTL871X: ===>phy_SwChnl8703B: Channel = 1
<4>[ 35.600581] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=21 seq=3 len=1
<4>[ 35.601057] RTL871X: rtl8703b_c2h_packet_handler: C2H, ID=9 seq=4 len=7
<4>[ 35.601218] RTL871X: survey done event(1a) band:0 for wlan0
<4>[ 35.603110] RTL871X: rtw_indicate_scan_done(wlan0)
<4>[ 35.610221] RTL871X: IsBtDisabled=0, IsBtControlLps=0
<4>[ 35.615946] RTL871X: HwRateToMRate(): Non supported Rate [ff]!!!
<4>[ 35.623079] RTL871X: ==>rtw_ps_processor .fw_state(8)
<4>[ 35.624774] RTL871X: ==>ips_enter cnts:1
<4>[ 35.624791] RTL871X: nolinked power save enter
<4>[ 35.624800] RTL871X: ===> rtw_ips_pwr_down...................
<4>[ 35.624811] RTL871X: ====> rtw_ips_dev_unload...
<4>[ 35.651942] RTL871X: SetHwReg8703B: bMacPwrCtrlOn=0
<4>[ 35.653336] RTL871X: <=== rtw_ips_pwr_down..................... in 30ms
UART
HELLO! BOOT0 is starting! boot0 version : 4.0.0 fel_flag = 0x00000000 rtc[0] value = 0x00000000 rtc[1] value = 0x000000cf rtc[2] value = 0x00000000 rtc[3] value = 0xf1f18000 DRAM DRIVE INFO: V1.6 DRAM Type =3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3) DRAM zq value: 00003bbbDRAM CLK =384 MHZ USE PLL DDR1 USE PLL NORMAL PLL FREQUENCE = 768 MHZ DRAM PLL DDR1 frequency extend open ! DRAM master priority setting ok. Auto calculate timing parameter! para_dram_tpr0 = 004520cb para_dram_tpr1 = 01c218c8 para_dram_tpr2 = 0004402e tcl = 6,tcwl = 4 DRAM TIMING PARA0 = 090a1808 DRAM TIMING PARA1 = 0003040b DRAM TIMING PARA2 = 0406050a DRAM TIMING PARA3 = 0000400c DRAM TIMING PARA4 = 03020403 DRAM TIMING PARA5 = 05050403 DRAM TIMING PARA8 = 90003310 DRAM PHY INTERFACE PARA = 02040102 DRAM VTC is disable DRAM DQS/DQ ODT is off DRAM DQS gate is PD mode. DRAM one rank training is on,the value is 91003587 DRAM work mode register value = 004318f4 DRAM SIZE =1024 M set one rank ODTMAP DRAM simple test OK. dram size =1024 card boot number = 2 card no is 2 sdcard 2 line count 4 [mmc]: mmc driver ver 2014-8-11 15:06:39 [mmc]: ***Try SD card 2*** [mmc]: mmc 2 cmd 8 timeout, err 00000100 [mmc]: mmc 2 cmd 8 err 00000100 [mmc]: mmc 2 send if cond failed [mmc]: mmc 2 cmd 55 timeout, err 00000100 [mmc]: mmc 2 cmd 55 err 00000100 [mmc]: mmc 2 send app cmd failed [mmc]: ***Try MMC card 2*** [mmc]: MMC ver 4.41 [mmc]: SD/MMC Card: 4bit, capacity: 15160MB [mmc]: vendor: Man 0090014a Snr 6f00738a [mmc]: product: HYNIX [mmc]: revision: 2.0 [mmc]: ***SD/MMC 2 init OK!!!*** sdcard 2 init ok The size of uboot is 000c0000. sum=28bc5637 src_sum=28bc5637 set_mmc_para,sdly 50M 0 set_mmc_para,sdly 25M 0 Succeed in loading uboot from sdmmc flash. Ready to disable icache. Jump to secend Boot. [ 0.411] U-Boot 2011.09-rc1-00000-g7f882fb-dirty (Jul 08 2016 - 13:37:20) Allwinner Technology [ 0.420]version: 1.1.0 [ 0.506]pmbus: normal or secure os ready [ 0.510]PMU: AXP221 [ 0.513]PMU: AXP22x found bat_vol=4114, ratio=90 [ 0.518]PMU: dcdc3 1200 [ 0.521]PMU: pll1 1008 Mhz,PLL6=600 Mhz AXI=336 Mhz,AHB=200 Mhz, APB1=100 Mhz set power on vol to default dcdc1_vol = 3000 dcdc2_vol = 1100 dcdc3_vol = 1200 dcdc4_vol = 0 dcdc5_vol = 1650 aldo2_vol = 2500 aldo3_vol = 3000 find power_sply to end vbus exist vbus pc exist, limit to pc fel key old mode run key detect no key found no key input dram_para_set start dram_para_set end [ 0.724]DRAM: 1 GiB relocation Offset is: 35b0d000 smcl's set manager is NULL <axp22, dc1sw> workmode = 0 MMC: 2 [ 0.783][mmc]: mmc driver ver 2014-11-25 17:03:00 [ 0.788][mmc]: get sdc_phy_wipe fail. [ 0.792][mmc]: get sdc0 sdc_erase fail. [ 0.796][mmc]: get sdc_2xmode ok, val = 1 [ 0.800][mmc]: get sdc_ddrmode fail used = 0 [ 0.805][mmc]: get sdc_f_max fail,use default 50000000Hz [ 0.810][mmc]: get card_line ok, card_line = 4 [ 0.815][mmc]: undefined value 0 or kernel not use auto sample,use default dly [ 0.822][mmc]: SUNXI SD/MMC: 2 [ 0.836][mmc]: *Try SD card 2* [ 0.839][mmc]: mmc 2 cmd 8 err 100 [ 0.845][mmc]: mmc send if cond failed [ 0.849][mmc]: mmc 2 cmd 55 err 100 [ 0.854][mmc]: send app cmd failed [ 0.857][mmc]: *Try MMC card 2* [ 0.909][mmc]: CID 0x90014a48 0x594e4958 0x206f0073 0x8ae2cfd7 [ 0.914][mmc]: MMC ver 4.41 [ 0.917][mmc]: mmc clk 50000000 [ 0.921][mmc]: SD/MMC Card: 4bit, capacity: 15160MB [ 0.926][mmc]: boot0 capacity: 2000KB,boot1 capacity: 2000KB [ 0.931][mmc]: ***SD/MMC 2 init OK!!!*** [ 0.937][mmc]: erase_grp_size:0x400WrBlk * 0x200 = 0x80000 Byte [ 0.942][mmc]: secure_feature 0x15 [ 0.946][mmc]: secure_removal_type 0x0 [ 0.950]sunxi flash init ok sunxi secure storage is not supported [ 0.959]usb burn from boot delay time 0 [ 1.029]usb prepare ok usb sof ok [ 1.227]usb probe ok [ 1.230]usb setup ok set address 0x4 [ 4.232]timer occur [ 4.267]do_burn_from_boot usb : have no handshake In: serial Out: serial Err: serial --------fastboot partitions-------- -total partitions:11- -name- -start- -size- bootloader : 1000000 2000000 env : 3000000 1000000 boot : 4000000 1000000 system : 5000000 80000000 misc : 85000000 1000000 recovery : 86000000 2000000 cache : 88000000 30000000 metadata : b8000000 1000000 private : b9000000 1000000 alog : ba000000 5000000 UDISK : bf000000 0 ----------------------------------- base bootcmd=run setargs_nand boot_normal bootcmd set setargs_mmc key 0 recovery key high 255, low 3 cant find fstbt value misc partition found to be run cmd=run setargs_mmc boot_normal ** Unable to read "sn.txt" from sunxi_flash 8:0 ** load file(sn.txt) error serial is: 03549ab7690500000000 mount part name bootloader cant open script.bin, maybe it is not exist WORK_MODE_BOOT board_status_probe [ 4.382]pre sys mode sunxi_bmp_logo_display [ 4.492][mmc]: blkcnt should not be 0 screen_id =0, screen_width =1024, screen_height =600 [ 4.518]Hit any key to stop autoboot: 0 read boot or recovery all [ 5.154]sunxi flash read :offset 4000000, 15039400 bytes OK no signature [ 5.169]ready to boot para err in disp_ioctl, cmd = 0xa,screen id = 1 [ 5.176][mmc]: mmc exit start [ 5.195][mmc]: mmc 2 cmd 8 err 100 [ 5.201][mmc]: mmc send if cond failed [ 5.205][mmc]: mmc 2 cmd 55 err 100 [ 5.210][mmc]: send app cmd failed [ 5.219][mmc]: mmc 2 exit ok [ 5.222] Starting kernel ... PT��Ȁ((�
script dump
defines.txt
DATE: 04/20/17 TIME: 16:13:04
name: 3g_para
sub_key: name type value
bb_pwr_on gpio (gpio: 0x163 / PL3, mul: 1, pull -1, drv -1, data 0)
bb_wake gpio (gpio: 0x164 / PL4, mul: 1, pull -1, drv -1, data 0)
bb_rf_dis gpio (gpio: 0x16b / PL11, mul: 1, pull -1, drv -1, data 0)
bb_rst gpio (gpio: 0x165 / PL5, mul: 1, pull -1, drv -1, data 0)
bb_vbat invalid type!
bb_on invalid type!
3g_used int 0
3g_usbc_num int 1
3g_uart_num int 2
bb_name string "em66"
bb_dldo string "axp22_aldo1"
bb_dldo_min_uV int 2800000
bb_dldo_max_uV int 2800000
name: audio0
sub_key: name type value
audio_pa_ctrl gpio (gpio: 0xe9 / PH9, mul: 1, pull -1, drv -1, data 0)
headphone_vol int 59
earpiece_vol int 59
cap_vol int 5
pa_single_vol int 61
pa_double_used int 1
pa_double_vol int 61
headphone_direct_usedint 1
headset_mic_volint 6
main_mic_vol int 7
audio_hp_ldo string "none"
audio_used int 1
aif2_used int 0
aif3_used int 0
headphone_mute_usedint 0
DAC_VOL_CTRL_SPKint 41120
DAC_VOL_CTRL_HEADPHONEint 41120
agc_used int 0
drc_used int 0
name: bt_para
sub_key: name type value
bt_rst_n gpio (gpio: 0x168 / PL8, mul: 1, pull -1, drv -1, data 0)
bt_wake gpio (gpio: 0x16a / PL10, mul: 1, pull -1, drv -1, data 0)
bt_host_wake gpio (gpio: 0x169 / PL9, mul: 4, pull -1, drv -1, data 0)
bt_uart_id int 1
bt_used int 1
bt_wake_invert int 0
bt_host_wake_invertint 0
ls_int invalid type!
pcm_ch invalid type!
name: card_boot
sub_key: name type value
logical_start int 40960
sprite_gpio0 invalid type!
name: charging_type
sub_key: name type value
charging_type int 1
name: clock
sub_key: name type value
pll3 int 297
pll4 int 300
pll6 int 600
pll8 int 384
pll9 int 480
pll10 int 234
pll_cpupat int 0
pll_gpupat int -1002379674
pll_videopat int 0
pll_vepat int 0
pll_hsicpat int 0
pll_depat int 0
pll_mipipat int 0
pll_mipitun int 167780360
pll_mipibias int -133168128
name: compass_para
sub_key: name type value
compass_used int 0
compass_twi_id int 1
compass_twi_addrint 13
compass_int invalid type!
name: cooler_table
sub_key: name type value
cooler_count int 4
cooler0 string "1344000 4 4294967295 0"
cooler1 string "1200000 4 4294967295 0"
cooler2 string "1008000 4 4294967295 0"
cooler3 string "648000 4 4294967295 0"
name: csi0
sub_key: name type value
vip_csi_pck gpio (gpio: 0x80 / PE0, mul: 2, pull -1, drv -1, data -1)
vip_csi_mck gpio (gpio: 0x81 / PE1, mul: 2, pull -1, drv -1, data -1)
vip_csi_hsync gpio (gpio: 0x82 / PE2, mul: 2, pull -1, drv -1, data -1)
vip_csi_vsync gpio (gpio: 0x83 / PE3, mul: 2, pull -1, drv -1, data -1)
vip_csi_d0 gpio (gpio: 0x84 / PE4, mul: 2, pull -1, drv -1, data -1)
vip_csi_d1 gpio (gpio: 0x85 / PE5, mul: 2, pull -1, drv -1, data -1)
vip_csi_d2 gpio (gpio: 0x86 / PE6, mul: 2, pull -1, drv -1, data -1)
vip_csi_d3 gpio (gpio: 0x87 / PE7, mul: 2, pull -1, drv -1, data -1)
vip_csi_d4 gpio (gpio: 0x88 / PE8, mul: 2, pull -1, drv -1, data -1)
vip_csi_d5 gpio (gpio: 0x89 / PE9, mul: 2, pull -1, drv -1, data -1)
vip_csi_d6 gpio (gpio: 0x8a / PE10, mul: 2, pull -1, drv -1, data -1)
vip_csi_d7 gpio (gpio: 0x8b / PE11, mul: 2, pull -1, drv -1, data -1)
vip_dev0_reset gpio (gpio: 0x8e / PE14, mul: 1, pull -1, drv -1, data 0)
vip_dev0_pwdn gpio (gpio: 0x8f / PE15, mul: 1, pull -1, drv -1, data 1)
vip_dev1_reset gpio (gpio: 0x8e / PE14, mul: 1, pull -1, drv -1, data 0)
vip_dev1_pwdn gpio (gpio: 0x91 / PE17, mul: 1, pull -1, drv -1, data 1)
vip_dev0_mname string "gc2145"
vip_dev0_pos string "rear"
vip_dev0_lane int 1
vip_dev0_twi_idint 2
vip_dev0_twi_addrint 120
vip_dev0_isp_usedint 0
vip_dev0_fmt int 0
vip_dev0_stby_modeint 0
vip_dev0_vflip int 0
vip_dev0_hflip int 0
vip_dev0_iovdd string "axp22_dldo3"
vip_dev0_iovdd_volint 2800000
vip_dev0_avdd string "axp22_ldoio0"
vip_dev0_avdd_volint 2800000
vip_dev0_dvdd string "axp22_eldo2"
vip_dev0_dvdd_volint 1800000
vip_dev0_afvdd string "axp22_dldo3"
vip_dev0_afvdd_volint 2800000
vip_dev0_power_eninvalid type!
vip_used int 1
vip_mode int 0
vip_dev0_flash_eninvalid type!
vip_dev0_flash_modeinvalid type!
vip_dev0_af_pwdninvalid type!
vip_dev1_mname string "gc0312"
vip_dev1_pos string "front"
vip_dev1_lane int 1
vip_dev1_twi_idint 2
vip_dev1_twi_addrint 66
vip_dev1_isp_usedint 0
vip_dev1_fmt int 0
vip_dev1_stby_modeint 0
vip_dev1_vflip int 0
vip_dev1_hflip int 0
vip_dev1_iovdd string "axp22_dldo3"
vip_dev1_iovdd_volint 2800000
vip_dev1_avdd string "axp22_ldoio0"
vip_dev1_avdd_volint 2800000
vip_dev1_dvdd string "axp22_eldo2"
vip_dev1_dvdd_volint 1800000
vip_dev1_afvdd string "axp22_dldo3"
vip_dev1_afvdd_volint 2800000
vip_dev1_power_eninvalid type!
vip_dev_qty int 2
vip_define_sensor_listint 0
vip_dev1_flash_eninvalid type!
vip_dev1_flash_modeinvalid type!
vip_dev1_af_pwdninvalid type!
name: ctp_para
sub_key: name type value
ctp_int_port gpio (gpio: 0x25 / PB5, mul: 4, pull -1, drv -1, data -1)
ctp_wakeup gpio (gpio: 0xe1 / PH1, mul: 1, pull -1, drv -1, data 1)
ctp_twi_id int 0
ctp_twi_addr int 64
ctp_screen_max_xint 1024
ctp_screen_max_yint 600
ctp_revert_x_flagint 1
ctp_revert_y_flagint 1
ctp_exchange_x_y_flagint 1
ctp_used int 1
ctp_name string "gsl1680e_101"
ctp_power_ldo string "axp22_ldoio1"
ctp_power_ldo_volint 3000
ctp_power_io invalid type!
name: ctp_list_para
sub_key: name type value
ctp_det_used int 0
ft5x_ts int 1
gt82x int 1
gslX680 int 1
gslX680new int 0
gt9xx_ts int 0
gt9xxf_ts int 1
tu_ts int 0
gt818_ts int 1
zet622x int 1
aw5306_ts int 1
icn83xx_ts int 0
name: disp_init
sub_key: name type value
disp_init_enableint 1
disp_mode int 0
screen0_output_typeint 1
screen0_output_modeint 4
screen1_output_typeint 1
screen1_output_modeint 4
fb0_format int 10
fb0_pixel_sequenceint 0
fb0_scaler_mode_enableint 0
fb0_width int 0
fb0_height int 0
fb1_format int 10
fb1_pixel_sequenceint 0
fb1_scaler_mode_enableint 0
fb1_width int 0
fb1_height int 0
lcd0_backlight int 200
lcd1_backlight int 200
lcd0_bright int 50
lcd0_contrast int 50
lcd0_saturationint 57
lcd0_hue int 50
lcd1_bright int 50
lcd1_contrast int 50
lcd1_saturationint 57
lcd1_hue int 50
name: dram_dvfs_table
sub_key: name type value
LV_count int 3
LV1_freq int 384000000
LV1_volt int 1100
LV2_freq int 360000000
LV2_volt int 1100
LV3_freq int 0
LV3_volt int 1100
name: dram_para
sub_key: name type value
dram_clk int 384
dram_type int 3
dram_zq int 15291
dram_odt_en int 1
dram_para1 int 285344768
dram_para2 int 0
dram_mr0 int 7280
dram_mr1 int 64
dram_mr2 int 24
dram_mr3 int 0
dram_tpr0 int 4530379
dram_tpr1 int 29497544
dram_tpr2 int 278574
dram_tpr3 int 0
dram_tpr4 int 0
dram_tpr5 int 0
dram_tpr6 int 0
dram_tpr7 int 0
dram_tpr8 int 0
dram_tpr9 int 0
dram_tpr10 int 0
dram_tpr11 int 0
dram_tpr12 int 168
dram_tpr13 int 67841
name: dram_scene_table
sub_key: name type value
LV_count int 3
LV1_scene int 1
LV1_freq int 360000000
LV2_scene int 2
LV2_freq int 240000000
LV3_scene int 3
LV3_freq int 168000000
name: dvfs_table
sub_key: name type value
extremity_freq int 1344000000
max_freq int 1200000000
min_freq int 480000000
LV_count int 8
LV1_freq int 1536000000
LV1_volt int 1500
LV2_freq int 1344000000
LV2_volt int 1460
LV3_freq int 1200000000
LV3_volt int 1320
LV4_freq int 1008000000
LV4_volt int 1200
LV5_freq int 816000000
LV5_volt int 1100
LV6_freq int 648000000
LV6_volt int 1040
LV7_freq int 0
LV7_volt int 1040
LV8_freq int 0
LV8_volt int 1040
name: gsensor_para
sub_key: name type value
gsensor_int1 gpio (gpio: 0x26 / PB6, mul: 4, pull 1, drv -1, data -1)
gsensor_twi_id int 1
gsensor_twi_addrint 39
gsensor_used int 1
gsensor_int2 invalid type!
name: gy_para
sub_key: name type value
gy_used int 0
gy_twi_id int 1
gy_twi_addr int 106
gy_int1 invalid type!
gy_int2 invalid type!
name: i2s0
sub_key: name type value
i2s0_bclk gpio (gpio: 0x24 / PB4, mul: 2, pull 1, drv -1, data -1)
i2s0_lrclk gpio (gpio: 0x25 / PB5, mul: 2, pull 1, drv -1, data -1)
i2s0_dout0 gpio (gpio: 0x26 / PB6, mul: 2, pull 1, drv -1, data -1)
i2s0_din gpio (gpio: 0x27 / PB7, mul: 2, pull 1, drv -1, data -1)
audio_format int 1
signal_inversionint 1
over_sample_rateint 512
sample_resolutionint 16
word_select_sizeint 32
pcm_sync_periodint 256
msb_lsb_first int 0
sign_extend int 0
slot_index int 0
slot_width int 16
frame_width int 1
tx_data_mode int 1
rx_data_mode int 1
i2s0_mclk invalid type!
i2s0_used int 0
i2s0_channel int 2
i2s0_master int 4
i2s0_dout1 invalid type!
i2s0_dout2 invalid type!
i2s0_dout3 invalid type!
i2s0_select int 1
name: i2s1
sub_key: name type value
i2s1_bclk gpio (gpio: 0xcb / PG11, mul: 2, pull 1, drv -1, data -1)
i2s1_lrclk gpio (gpio: 0xca / PG10, mul: 2, pull 1, drv -1, data -1)
i2s1_dout gpio (gpio: 0xcc / PG12, mul: 2, pull 1, drv -1, data -1)
i2s1_din gpio (gpio: 0xcd / PG13, mul: 2, pull 1, drv -1, data -1)
audio_format int 1
signal_inversionint 1
over_sample_rateint 512
sample_resolutionint 16
word_select_sizeint 32
pcm_sync_periodint 64
msb_lsb_first int 0
sign_extend int 0
slot_index int 0
slot_width int 16
frame_width int 1
tx_data_mode int 0
rx_data_mode int 0
i2s1_mclk invalid type!
i2s1_used int 0
i2s1_channel int 2
i2s1_master int 4
i2s1_select int 1
name: jtag_para
sub_key: name type value
jtag_ms gpio (gpio: 0xa0 / PF0, mul: 3, pull -1, drv -1, data -1)
jtag_ck gpio (gpio: 0xa5 / PF5, mul: 3, pull -1, drv -1, data -1)
jtag_do gpio (gpio: 0xa3 / PF3, mul: 3, pull -1, drv -1, data -1)
jtag_di gpio (gpio: 0xa1 / PF1, mul: 3, pull -1, drv -1, data -1)
jtag_enable int 1
name: key_detect_en
sub_key: name type value
keyen_flag int 1
name: lcd0_para
sub_key: name type value
lcd_bl_en gpio (gpio: 0xe6 / PH6, mul: 1, pull 0, drv -1, data 1)
lcd_gpio_0 gpio (gpio: 0xe7 / PH7, mul: 1, pull 0, drv -1, data 0)
lcd_gpio_1 gpio (gpio: 0x164 / PL4, mul: 1, pull 0, drv -1, data 1)
lcd_gpio_2 gpio (gpio: 0x16b / PL11, mul: 1, pull 0, drv -1, data 0)
lcdd0 gpio (gpio: 0x72 / PD18, mul: 3, pull 0, drv -1, data -1)
lcdd1 gpio (gpio: 0x73 / PD19, mul: 3, pull 0, drv -1, data -1)
lcdd2 gpio (gpio: 0x74 / PD20, mul: 3, pull 0, drv -1, data -1)
lcdd3 gpio (gpio: 0x75 / PD21, mul: 3, pull 0, drv -1, data -1)
lcdd4 gpio (gpio: 0x76 / PD22, mul: 3, pull 0, drv -1, data -1)
lcdd5 gpio (gpio: 0x77 / PD23, mul: 3, pull 0, drv -1, data -1)
lcdd6 gpio (gpio: 0x78 / PD24, mul: 3, pull 0, drv -1, data -1)
lcdd7 gpio (gpio: 0x79 / PD25, mul: 3, pull 0, drv -1, data -1)
lcdd8 gpio (gpio: 0x7a / PD26, mul: 3, pull 0, drv -1, data -1)
lcdd9 gpio (gpio: 0x7b / PD27, mul: 3, pull 0, drv -1, data -1)
lcd_hspw int 30
lcd_vbp int 23
lcd_vt int 635
lcd_vspw int 13
lcd_lvds_if int 0
lcd_lvds_colordepthint 0
lcd_lvds_mode int 0
lcd_frm int 1
lcd_gamma_en int 0
lcd_bright_curve_enint 0
lcd_cmap_en int 0
deu_mode int 0
lcdgamma4iep int 22
smart_color int 90
lcd_used int 1
lcd_power string "axp22_dc1sw"
lcd_driver_namestring "starry768x1024"
lcd_if int 3
lcd_x int 1024
lcd_y int 600
lcd_width int 197
lcd_height int 114
lcd_dclk_freq int 51
lcd_pwm_used int 1
lcd_pwm_ch int 0
lcd_pwm_freq int 50000
lcd_pwm_pol int 1
lcd_hbp int 160
lcd_ht int 1344
name: ls_para
sub_key: name type value
ls_int gpio (gpio: 0x27 / PB7, mul: 4, pull 1, drv -1, data -1)
ls_twi_id int 1
ls_twi_addr int 35
ls_used int 0
name: ls_list_para
sub_key: name type value
ls_det_used int 0
ltr_501als int 1
jsa1212 int 1
name: mali_para
sub_key: name type value
mali_used int 1
mali_clkdiv int 1
mali_extreme_freqint 408
mali_extreme_volint 1100
name: mmc0_para
sub_key: name type value
sdc_d1 gpio (gpio: 0xa0 / PF0, mul: 2, pull 1, drv 2, data -1)
sdc_d0 gpio (gpio: 0xa1 / PF1, mul: 2, pull 1, drv 2, data -1)
sdc_clk gpio (gpio: 0xa2 / PF2, mul: 2, pull 1, drv 2, data -1)
sdc_cmd gpio (gpio: 0xa3 / PF3, mul: 2, pull 1, drv 2, data -1)
sdc_d3 gpio (gpio: 0xa4 / PF4, mul: 2, pull 1, drv 2, data -1)
sdc_d2 gpio (gpio: 0xa5 / PF5, mul: 2, pull 1, drv 2, data -1)
sdc_det gpio (gpio: 0x24 / PB4, mul: 4, pull 1, drv 2, data -1)
sdc_detmode int 1
sdc_buswidth int 4
sdc_used int 1
sdc_power_supplystring "axp22_dcdc1"
sdc_use_wp int 0
sdc_wp invalid type!
sdc_isio int 0
sdc_regulator string "none"
name: mmc1_para
sub_key: name type value
sdc_clk gpio (gpio: 0xc0 / PG0, mul: 2, pull 1, drv 2, data -1)
sdc_cmd gpio (gpio: 0xc1 / PG1, mul: 2, pull 1, drv 2, data -1)
sdc_d0 gpio (gpio: 0xc2 / PG2, mul: 2, pull 1, drv 2, data -1)
sdc_d1 gpio (gpio: 0xc3 / PG3, mul: 2, pull 1, drv 2, data -1)
sdc_d2 gpio (gpio: 0xc4 / PG4, mul: 2, pull 1, drv 2, data -1)
sdc_d3 gpio (gpio: 0xc5 / PG5, mul: 2, pull 1, drv 2, data -1)
sdc_used int 1
sdc_detmode int 4
sdc_buswidth int 4
sdc_det invalid type!
sdc_use_wp int 0
sdc_wp invalid type!
sdc_isio int 1
sdc_regulator string "none"
name: mmc2_para
sub_key: name type value
sdc_clk gpio (gpio: 0x45 / PC5, mul: 3, pull 1, drv 2, data -1)
sdc_cmd gpio (gpio: 0x46 / PC6, mul: 3, pull 1, drv 2, data -1)
sdc_d0 gpio (gpio: 0x48 / PC8, mul: 3, pull 1, drv 2, data -1)
sdc_d1 gpio (gpio: 0x49 / PC9, mul: 3, pull 1, drv 2, data -1)
sdc_d2 gpio (gpio: 0x4a / PC10, mul: 3, pull 1, drv 2, data -1)
sdc_d3 gpio (gpio: 0x4b / PC11, mul: 3, pull 1, drv 2, data -1)
sdc_d4 gpio (gpio: 0x4c / PC12, mul: 3, pull 1, drv 2, data -1)
sdc_d5 gpio (gpio: 0x4d / PC13, mul: 3, pull 1, drv 2, data -1)
sdc_d6 gpio (gpio: 0x4e / PC14, mul: 3, pull 1, drv 2, data -1)
sdc_d7 gpio (gpio: 0x4f / PC15, mul: 3, pull 1, drv 2, data -1)
emmc_rst gpio (gpio: 0x50 / PC16, mul: 3, pull 1, drv 2, data -1)
sdc_2xmode int 1
sdc_used int 1
sdc_detmode int 3
sdc_buswidth int 8
sdc_power_supplystring "axp22_dcdc1"
sdc_det invalid type!
sdc_use_wp int 0
sdc_wp invalid type!
sdc_isio int 0
sdc_regulator string "none"
sdc_ex_dly_usedint 0
sdc_odly_400K invalid type!
sdc_odly_25M int 0
sdc_odly_50M int 3
sdc_odly_50MDDRinvalid type!
sdc_odly_50MDDR_8BITinvalid type!
sdc_odly_100M invalid type!
sdc_odly_200M invalid type!
sdc_sdly_400K invalid type!
sdc_sdly_25M int 4
sdc_sdly_50M int 7
sdc_sdly_50MDDRinvalid type!
sdc_sdly_50MDDR_8BITinvalid type!
sdc_sdly_100M invalid type!
sdc_sdly_200M invalid type!
name: motor_para
sub_key: name type value
motor_shake gpio (gpio: 0x403 / GPIO3, mul: 1, pull -1, drv -1, data 1)
motor_used int 0
motor_ldo string ""
motor_ldo_voltageint 3300
name: msc_feature
sub_key: name type value
vendor_name string "USB 2.0"
product_name string "USB Flash Driver"
release int 100
luns int 2
name: pm_para
sub_key: name type value
standby_mode int 1
name: pmu1_para
sub_key: name type value
pmu_used int 1
pmu_twi_addr int 52
pmu_twi_id int 1
pmu_irq_id int 0
pmu_battery_rdcint 100
pmu_battery_capint 0
pmu_batdeten int 1
pmu_chg_ic_tempint 0
pmu_runtime_chgcurint 500
pmu_earlysuspend_chgcurint 1200
pmu_suspend_chgcurint 1300
pmu_shutdown_chgcurint 1300
pmu_init_chgvolint 4200
pmu_init_chgend_rateint 15
pmu_init_chg_enabledint 1
pmu_init_adc_freqint 800
pmu_init_adcts_freqint 800
pmu_init_chg_pretimeint 70
pmu_init_chg_csttimeint 720
pmu_batt_cap_correctint 1
pmu_bat_regu_enint 1
pmu_bat_para1 int 0
pmu_bat_para2 int 0
pmu_bat_para3 int 0
pmu_bat_para4 int 0
pmu_bat_para5 int 0
pmu_bat_para6 int 0
pmu_bat_para7 int 0
pmu_bat_para8 int 0
pmu_bat_para9 int 5
pmu_bat_para10 int 8
pmu_bat_para11 int 9
pmu_bat_para12 int 10
pmu_bat_para13 int 13
pmu_bat_para14 int 16
pmu_bat_para15 int 20
pmu_bat_para16 int 33
pmu_bat_para17 int 41
pmu_bat_para18 int 46
pmu_bat_para19 int 50
pmu_bat_para20 int 53
pmu_bat_para21 int 57
pmu_bat_para22 int 61
pmu_bat_para23 int 67
pmu_bat_para24 int 73
pmu_bat_para25 int 78
pmu_bat_para26 int 84
pmu_bat_para27 int 88
pmu_bat_para28 int 92
pmu_bat_para29 int 93
pmu_bat_para30 int 94
pmu_bat_para31 int 95
pmu_bat_para32 int 100
pmu_usbvol_limitint 0
pmu_usbcur_limitint 0
pmu_usbvol int 4000
pmu_usbcur int 0
pmu_usbvol_pc int 4400
pmu_usbcur_pc int 500
pmu_pwroff_vol int 3300
pmu_pwron_vol int 2600
pmu_pekoff_timeint 6000
pmu_pekoff_funcint 0
pmu_pekoff_en int 1
pmu_peklong_timeint 1500
pmu_pekon_time int 1000
pmu_pwrok_time int 64
pmu_battery_warning_level1int 15
pmu_battery_warning_level2int 0
pmu_restvol_adjust_timeint 60
pmu_ocv_cou_adjust_timeint 60
pmu_chgled_funcint 0
pmu_chgled_typeint 0
pmu_vbusen_funcint 1
pmu_reset int 0
pmu_IRQ_wakeup int 1
pmu_hot_shutdowmint 1
pmu_inshort int 0
power_start int 0
pmu_temp_enableint 1
pmu_charge_ltf int 2261
pmu_charge_htf int 388
pmu_discharge_ltfint 3200
pmu_discharge_htfint 237
pmu_temp_para1 int 7466
pmu_temp_para2 int 4480
pmu_temp_para3 int 3518
pmu_temp_para4 int 2786
name: pmu2_para
sub_key: name type value
pmu_used int 0
pmu_twi_addr int 52
pmu_twi_id int 1
pmu_irq_id int 0
name: power_sply
sub_key: name type value
dcdc1_vol int 3000
dcdc2_vol int 1100
dcdc3_vol int 1200
dcdc4_vol int 0
dcdc5_vol int 1650
aldo2_vol int 2500
aldo3_vol int 3000
name: product
sub_key: name type value
version string "100"
machine string "a33-tablet"
name: pwm0_para
sub_key: name type value
pwm_positive gpio (gpio: 0xe0 / PH0, mul: 2, pull 0, drv -1, data -1)
pwm_used int 1
name: pwm1_para
sub_key: name type value
pwm_positive gpio (gpio: 0xe1 / PH1, mul: 2, pull 0, drv -1, data -1)
pwm_used int 0
name: recovery_key
sub_key: name type value
key_min int 3
key_max int 255
name: s_uart0
sub_key: name type value
s_uart_tx gpio (gpio: 0x162 / PL2, mul: 2, pull -1, drv -1, data -1)
s_uart_rx gpio (gpio: 0x163 / PL3, mul: 2, pull -1, drv -1, data -1)
s_uart_used int 0
name: s_rsb0
sub_key: name type value
s_rsb_sck gpio (gpio: 0x160 / PL0, mul: 2, pull 1, drv 2, data -1)
s_rsb_sda gpio (gpio: 0x161 / PL1, mul: 2, pull 1, drv 2, data -1)
s_rsb_used int 1
name: s_jtag0
sub_key: name type value
s_jtag_tms gpio (gpio: 0x164 / PL4, mul: 2, pull 1, drv 2, data -1)
s_jtag_tck gpio (gpio: 0x165 / PL5, mul: 2, pull 1, drv 2, data -1)
s_jtag_tdo gpio (gpio: 0x166 / PL6, mul: 2, pull 1, drv 2, data -1)
s_jtag_tdi gpio (gpio: 0x167 / PL7, mul: 2, pull 1, drv 2, data -1)
s_jtag_used int 0
name: s_powchk
sub_key: name type value
s_powchk_used int -2147483648
s_power_reg int 32865
s_system_power int 50
name: spi0
sub_key: name type value
spi_mosi gpio (gpio: 0x40 / PC0, mul: 3, pull -1, drv -1, data -1)
spi_miso gpio (gpio: 0x41 / PC1, mul: 3, pull -1, drv -1, data -1)
spi_sclk gpio (gpio: 0x42 / PC2, mul: 3, pull -1, drv -1, data -1)
spi_cs0 gpio (gpio: 0x43 / PC3, mul: 3, pull 1, drv -1, data -1)
spi_used int 0
spi_cs_bitmap int 1
name: spi1
sub_key: name type value
spi_cs0 gpio (gpio: 0x0 / PA0, mul: 2, pull 1, drv -1, data -1)
spi_sclk gpio (gpio: 0x1 / PA1, mul: 2, pull -1, drv -1, data -1)
spi_mosi gpio (gpio: 0x2 / PA2, mul: 2, pull -1, drv -1, data -1)
spi_miso gpio (gpio: 0x3 / PA3, mul: 2, pull -1, drv -1, data -1)
spi_used int 0
spi_cs_bitmap int 1
name: spi_board0
sub_key: name type value
modalias string "at25df641"
max_speed_hz int 50000000
bus_num int 0
chip_select int 0
mode int 0
name: spi_devices
sub_key: name type value
spi_dev_num int 1
name: target
sub_key: name type value
boot_clock int 1008
storage_type int 2
burn_key int 1
name: ths_para
sub_key: name type value
ths_used int 1
ths_trip1_countint 3
ths_trip1_0 int 75
ths_trip1_1 int 90
ths_trip1_2 int 110
ths_trip1_0_minint 0
ths_trip1_0_maxint 1
ths_trip1_1_minint 1
ths_trip1_1_maxint 3
ths_trip1_2_minint 0
ths_trip1_2_maxint 0
name: tkey_para
sub_key: name type value
tkey_used int 0
tkey_twi_id invalid type!
tkey_twi_addr invalid type!
tkey_int invalid type!
name: twi_para
sub_key: name type value
twi_scl gpio (gpio: 0xe2 / PH2, mul: 2, pull -1, drv -1, data -1)
twi_sda gpio (gpio: 0xe3 / PH3, mul: 2, pull -1, drv -1, data -1)
twi_port int 0
name: twi0
sub_key: name type value
twi_scl gpio (gpio: 0xe2 / PH2, mul: 2, pull -1, drv -1, data -1)
twi_sda gpio (gpio: 0xe3 / PH3, mul: 2, pull -1, drv -1, data -1)
twi_used int 1
name: twi1
sub_key: name type value
twi_scl gpio (gpio: 0xe4 / PH4, mul: 2, pull -1, drv -1, data -1)
twi_sda gpio (gpio: 0xe5 / PH5, mul: 2, pull -1, drv -1, data -1)
twi_used int 1
name: twi2
sub_key: name type value
twi_scl gpio (gpio: 0x8c / PE12, mul: 3, pull -1, drv -1, data -1)
twi_sda gpio (gpio: 0x8d / PE13, mul: 3, pull -1, drv -1, data -1)
twi_used int 1
name: uart_para
sub_key: name type value
uart_debug_tx gpio (gpio: 0xa2 / PF2, mul: 3, pull 1, drv -1, data -1)
uart_debug_rx gpio (gpio: 0xa4 / PF4, mul: 3, pull 1, drv -1, data -1)
uart_debug_portint 0
name: uart0
sub_key: name type value
uart_tx gpio (gpio: 0xa2 / PF2, mul: 3, pull 1, drv -1, data -1)
uart_rx gpio (gpio: 0xa4 / PF4, mul: 3, pull 1, drv -1, data -1)
uart_type int 2
uart_used int 0
uart_port int 0
name: uart1
sub_key: name type value
uart_tx gpio (gpio: 0xc6 / PG6, mul: 2, pull 1, drv -1, data -1)
uart_rx gpio (gpio: 0xc7 / PG7, mul: 2, pull 1, drv -1, data -1)
uart_rts gpio (gpio: 0xc8 / PG8, mul: 2, pull 1, drv -1, data -1)
uart_cts gpio (gpio: 0xc9 / PG9, mul: 2, pull 0, drv -1, data -1)
uart_used int 1
uart_type int 4
name: uart2
sub_key: name type value
uart_tx gpio (gpio: 0x20 / PB0, mul: 2, pull 1, drv -1, data -1)
uart_rx gpio (gpio: 0x21 / PB1, mul: 2, pull 1, drv -1, data -1)
uart_rts gpio (gpio: 0x22 / PB2, mul: 2, pull 1, drv -1, data -1)
uart_cts gpio (gpio: 0x23 / PB3, mul: 2, pull 0, drv -1, data -1)
uart_used int 1
uart_type int 4
name: uart3
sub_key: name type value
uart_tx gpio (gpio: 0xe6 / PH6, mul: 3, pull 1, drv -1, data -1)
uart_rx gpio (gpio: 0xe7 / PH7, mul: 3, pull 1, drv -1, data -1)
uart_rts gpio (gpio: 0xe8 / PH8, mul: 3, pull 1, drv -1, data -1)
uart_cts gpio (gpio: 0xe9 / PH9, mul: 3, pull 1, drv -1, data -1)
uart_used int 0
uart_type int 4
name: uart4
sub_key: name type value
uart_tx gpio (gpio: 0x4 / PA4, mul: 2, pull 1, drv -1, data -1)
uart_rx gpio (gpio: 0x5 / PA5, mul: 2, pull 1, drv -1, data -1)
uart_rts gpio (gpio: 0x6 / PA6, mul: 2, pull 1, drv -1, data -1)
uart_cts gpio (gpio: 0x7 / PA7, mul: 2, pull 1, drv -1, data -1)
uart_port int 4
uart_type int 2
uart_used int 0
name: usbc0
sub_key: name type value
usb_id_gpio gpio (gpio: 0xe8 / PH8, mul: 0, pull 1, drv -1, data -1)
usb_drv_vbus_gpiogpio (gpio: 0x404 / GPIO4, mul: 1, pull 0, drv -1, data 0)
usb_detect_typeint 1
usb_used int 1
usb_det_vbus_gpiostring "axp_ctrl"
usb_port_type int 2
usb_restrict_gpioinvalid type!
usb_host_init_stateint 0
usb_restric_flagint 0
usb_restric_voltageint 3550000
usb_restric_capacityint 5
usb_regulator_iostring "nocare"
usb_regulator_volint 0
usb_regulator_id_vbusstring "axp22_dcdc1"
usb_regulator_id_vbus_volint 3000000
name: usbc1
sub_key: name type value
usb_used int 1
usb_drv_vbus_gpioinvalid type!
usb_restrict_gpioinvalid type!
usb_host_init_stateint 0
usb_restric_flagint 0
usb_regulator_iostring "nocare"
usb_regulator_volint 0
usb_not_suspendint 0
name: usb_feature
sub_key: name type value
vendor_id int 7994
mass_storage_idint 4096
adb_id int 4097
manufacturer_namestring "USB Developer"
product_name string "HP 7 G2"
serial_number string "00000000000000000000000000000000"
name: Vdevice
sub_key: name type value
Vdevice_0 gpio (gpio: 0x1 / PA1, mul: 5, pull 1, drv 2, data -1)
Vdevice_1 gpio (gpio: 0x2 / PA2, mul: 5, pull 1, drv 2, data -1)
Vdevice_used int 1
name: wakeup_src_para
sub_key: name type value
wakeup_src_wl gpio (gpio: 0x167 / PL7, mul: 4, pull -1, drv -1, data 0)
wakeup_src_bt gpio (gpio: 0x169 / PL9, mul: 4, pull -1, drv -1, data 0)
pll_ratio int 273
dram_selfresh_enint 1
dram_freq int 36
cpu_en int 0
cpu_freq int 48
name: wifi_para
sub_key: name type value
wl_reg_on gpio (gpio: 0x166 / PL6, mul: 1, pull -1, drv -1, data 0)
wl_host_wake gpio (gpio: 0x167 / PL7, mul: 4, pull -1, drv -1, data 0)
wifi_usbc_id int 1
wifi_usbc_type int 1
wifi_used int 1
wifi_sdc_id int 1
wl_host_wake_invertint 0